ATEQ supplier in Romania
For ATEQ we quote the F28+, F620 and F670 leak testers, the D6 Class and D620 flow testers, the He-490M and Hx-490S detectors and the CDF60 and CDF7000 calibrators, based on the part tested and the permitted leak rate.
Founded in 1975 · Headquarters: Les Clayes-sous-Bois, France
Who is ATEQ and what does it make?
ATEQ is a French manufacturer based in Les Clayes-sous-Bois, near Paris, active since 1975, that makes leak and flow testing instruments for production lines and laboratories. The range rests on four methods: pressure or vacuum decay, measured differentially by comparing the tested part with a sealed reference part; mass, laminar or continuous flow measurement; tracer gas detection (helium, hydrogen); and calibrators for checking the instruments on the line.
The F6 series leak testers include the compact F620, the F610 in a water-tight version and the F670 in a 19-inch, 3U rack format, all with a patented differential sensor and two test methods, with differential sensor or with desensitisation. F28+ and F26 Speed cover manual, semi-automatic and automatic testing, and F6 Class is the new generation with a redesigned measurement module. The D6 Class, D620 and D670 flow testers check gas valves, burners, gearboxes, hydraulic components and injectors. For tracer gas, He-490M measures by mass extraction in a vacuum chamber, and Hx-490S is a probe detector that switches between helium and hydrogen. CDF60, CDF7000 and CDP60 are the calibrators for flow, leaks and pressure.
Such instruments are found on automotive and hydraulic component production lines, at valve and burner factories, in testing heat exchangers and air-conditioning systems, and in the production of batteries and hydrogen components. The choice depends on the part volume, the test pressure, the permitted leak rate and the line cycle rate, which is why the quotation starts from the part tested and the existing instrument.
What do we supply from the ATEQ range?
| Product | Description |
|---|---|
| F6 series (F6 Class, F620, F610, F670) | Leak testers using differential pressure or vacuum decay, with a patented sensor and valve system; F6 Class brings the new measurement module, F670 has a 19-inch, 3U rack format, and F610 has a water-tight housing. |
| F28+ and F26 Speed | Compact testers for industrial quality control, suited to manual, semi-automatic and fully automatic tests, supervised from a touchscreen or through the WinATEQ 300 software, for parts from fluid components to electrical ones. |
| D series (D6 Class, D620, D670) | Compact, high-speed flow testers with direct or indirect flow measurement, used for gas valves, burners, valve seats, gearboxes, hydraulic components, engines and injectors. |
| He-490M, Hx-490S and calibrators | He-490M is a mass extraction detector in a vacuum chamber; Hx-490S, a helium or hydrogen probe; the CDF60, CDF7000 and CDP60 calibrators check leak, flow and pressure instruments in the field or in the laboratory. |
Why ATEQ?
- Patented differential sensor — the F6 series compares the part with a sealed reference, by pressure or vacuum decay, in three formats: F620, the water-tight F610 and the 19-inch F670
- Flow measured directly or indirectly — D6 Class, D620 and D670 check gas valves, burners, gearboxes and hydraulic components
- Helium or hydrogen with the same detector — Hx-490S switches between the two gases, with a response time under 0.5 seconds and a sensitivity of 5 × 10⁻⁸ atm·cm³/s
- Mass extraction with He-490M — the gas coming out of the part in the vacuum chamber is measured directly, for micro-leaks
- In-house calibrators — the portable CDF60, the multi-range CDF7000 and the CDP60 for pressure check both ATEQ instruments and other flow or pressure instruments
Which ATEQ codes and series are requested most often?
| Code | Description |
|---|---|
| F28+ | Compact leak tester for industrial control |
| F26 Speed | High-speed leak tester |
| F6 Class | Differential leak tester, new generation |
| F620 | Compact pressure and vacuum decay tester |
| F610 | Leak tester in a water-tight version |
| F670 | Leak tester in a 19-inch, 3U rack |
| D6 Class | Compact, high-speed flow tester |
| D620 | Compact mass flow tester |
| D670 | Flow tester in rack format |
| He-490M | Mass extraction detector in a vacuum chamber |
| He-490S | Helium leak detector, with probe |
| Hx-490S | Probe detector for helium and hydrogen |
| CDF60 | Portable leak and flow calibrator |
| CDF7000 | Multi-range flow calibrator |
| CDP60 | Pressure calibrator |
Where is ATEQ equipment used?
- Automotive and hydraulic components — testing engine parts, gearboxes and injectors
- Valves and burners — checking leak tightness and flow on gas valves and thermal appliances
- Batteries and hydrogen — tanks, pipes and fuel cell stacks
- Air conditioning and refrigeration — heat exchangers, pipes and refrigerant circuits
- Electronics — water-tightness tests for housings
How do we supply ATEQ in Romania?
We can quote ATEQ leak testers, flow testers, tracer gas detectors and calibrators, supplied to order. The lead time is usually 1–4 weeks to order, and depending on the specification it can be longer for configurations with accessories or several stations. For a quotation send us the model of the old instrument or a description of the part: volume, test pressure, permitted leak rate or flow, connection type, line cycle rate and whether the test is manual or automatic. The exact lead time is confirmed in the quotation.
The model is selected only from the volume of the part to be tested, the test pressure and the permitted leak rate.
Frequently asked questions about ATEQ
What does ATEQ make?
ATEQ, founded in 1975 and based in Les Clayes-sous-Bois, makes leak testers using pressure or vacuum decay, flow testers, helium or hydrogen detectors and calibrators. The instruments are fitted on production lines and in laboratories for checking parts.
How do I choose between an F6 leak tester and a D6 flow tester?
The leak tester compares the pressure of the part with a sealed reference and shows small leaks on closed parts. The flow tester measures the flow through the part, so it checks orifices, jets, burners or blockages. Send us the part, the pressure and the acceptance criterion, so that we can recommend the version.
Can you supply ATEQ instruments in Romania, and how fast?
Yes, to order, usually in 1–4 weeks; depending on the specification the lead time can be longer, especially for configurations with several channels or with tracer gas detectors. The exact lead time is confirmed in the quotation.
How do you check whether an F6 tester can replace an older ATEQ model?
We compare the model and series of the existing instrument, the pressure range, the connection type, the number of channels and the interface with the line, for example the signals to the PLC. Equivalence is confirmed once these data are available; a photo of the nameplate and of the connection panel speeds up the check.
What do I need to send for a quotation on a helium or hydrogen detector?
Send the tracer gas required, the leak rate to be detected, the size of the part, whether the test is done with a probe or in a vacuum chamber, and the cycle rate. Hx-490S switches between helium and hydrogen, and He-490M works in a vacuum chamber, so the choice depends on these data.
How do I request a ATEQ quotation?
Send the ATEQ code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: ATEQ (manufacturer documentation)

