Connection Technology Center supplier in Romania
For CTC we quote industrial accelerometers, 4–20 mA vibration sensors from the LP200 and LP600 series, PRO proximity transducers and WS300 wireless sensors; we need the sensor code, the sensitivity and the connector type.
Headquarters: Victor, New York, USA
Who is Connection Technology Center and what does it make?
Connection Technology Center (CTC) is an American manufacturer of vibration monitoring equipment, based in Victor, New York State. It makes industrial accelerometers, vibration sensors with 4–20 mA output, proximity transducers for turbomachinery bearings, wireless sensors and the accessories that matter in the field: cables, connectors, mounting bases and junction boxes. For a quotation, send us the sensor code, the sensitivity in mV/g and the connector or cable type.
The CTC line includes single-axis, dual-axis, triaxial and dual-output (vibration and temperature) accelerometers, in standard, compact and mini sizes, with top or side exit, at sensitivities from 10 to 1000 mV/g; the side-exit version is installed where the available height is small. Ultrasonic sensors detect bearing defects and lubrication problems early, and the sensors for hazardous areas have approvals according to the manufacturer's documentation. For manual data collection there are the VibeNavigator poles, of 4, 8 and 12 feet, and for cabling, the MAXX and Mini-MAXX switch and junction boxes.
The AMP line connects vibration directly to the controller: the LP200 and LP500 sensors give a 4–20 mA signal proportional to vibration velocity, LP300 and LP600 one proportional to acceleration, and LPH802 and LPH902 have approvals according to the manufacturer's documentation for Class I Div. 1 and ATEX/IECEx zone 0 and 1. The SC series signal conditioners, with one or two configurable frequency bands, complete the loop. The PRO line has 5, 8, 11 and 25 mm proximity transducers with drivers and standard or armoured extension cables, and the Connect line has the WS100, WS200 and WS300 wireless sensors, linked through a gateway to the TCP/IP network.
What do we supply from the Connection Technology Center range?
| Product | Description |
|---|---|
| CTC industrial accelerometers | Single-axis, dual-axis, triaxial and dual vibration–temperature output accelerometers, in standard, compact and mini sizes, with top or side exit. Sensitivities range from 10 to 1000 mV/g, for portable collection or fixed monitoring systems. |
| 4–20 mA sensors LP200 / LP500 / LP300 / LP600 | Loop-powered sensors, with a 4–20 mA output proportional to vibration velocity (LP200, LP500) or to acceleration (LP300, LP600). The 500 and 600 series have a second-order digital filter, response from 2 Hz and a temperature range from −40 °C. |
| PRO proximity transducers | Sets of 5, 8, 11 and 25 mm proximity transducers, with drivers and standard or armoured extension cables, for protecting plain bearings on turbines, compressors and large pumps. There are intrinsically safe versions, barriers and NEMA 4X driver enclosures. |
| ConnectSens WS wireless sensors | WS100 measures overall vibration on three axes, WS200 acquires dynamic data on one axis, and WS300 on three axes, all with temperature output. They connect through gateways to the TCP/IP network and are managed from the ConnectView web application. |
Why Connection Technology Center?
- Accelerometers from 10 to 1000 mV/g, with top or side exit — the sensor is chosen according to the machine, not the other way round
- LP 4–20 mA sensors with analogue or digital filter — the vibration goes straight into the PLC without a data collector
- Versions approved for zone 0/1 (LPH802, LPH902) and intrinsically safe proximity transducers — for installations with explosion risk
- Cables, connectors, magnetic bases and junction boxes from the same range — the complete installation is offered on compatible codes
- WS wireless sensors with integrated temperature — continuous monitoring where cabling is difficult
Which Connection Technology Center codes and series are requested most often?
| Code | Description |
|---|---|
| LP200 | 4–20 mA sensor proportional to vibration velocity, analogue filter |
| LP500 | 4–20 mA sensor for velocity, digital filter, from 2 Hz |
| LP300 | 4–20 mA sensor proportional to acceleration, analogue filter |
| LP600 | 4–20 mA sensor for acceleration, digital filter, from 2 Hz |
| LPH802 | 4–20 mA sensor for velocity, intrinsically safe, zone 0/1 |
| LPH902 | 4–20 mA sensor for acceleration, intrinsically safe, zone 0/1 |
| LPH822 | 4–20 mA sensor for velocity, non-incendive, zone 2 |
| SC300 | Signal conditioner from the AMP line |
| WS100 | Wireless sensor, overall vibration on three axes and temperature |
| WS200 | Wireless sensor, dynamic data on one axis |
| WS300 | Wireless sensor, dynamic data on three axes |
| VibeNavigator | Extension pole for data collection, 4, 8 or 12 feet |
Where is Connection Technology Center equipment used?
- Cement and mining — accelerometers on crushers, mills and large fans
- Paper industry — sensors on dryer cylinders and on pumps
- Cooling towers — 4–20 mA sensors on fan gearboxes
- Power and turbines — proximity transducers for bearings
- Food industry — vibration monitoring on motors and conveyors
How do we supply Connection Technology Center in Romania?
We can quote CTC accelerometers, 4–20 mA sensors, proximity transducers and accessories: cables, connectors, mounting bases, junction boxes. To choose correctly, we need the code of the current sensor or, for a new application, the machine type, the speed, the frequency range of interest, the sensitivity wanted and the system the sensor connects to (portable collector, PLC or protection system). Delivery can be in 24–72 h when the item is in stock, locally or at the supplier; the rest is supplied to order, usually in 1–4 weeks. The exact lead time is confirmed in the quotation.
The compatibility of a proximity transducer with an existing protection system is established from the make and model of the monitor and the total length of the cable.
Frequently asked questions about Connection Technology Center
What does Connection Technology Center (CTC) make?
CTC makes in the USA industrial accelerometers, vibration sensors with 4–20 mA output (AMP line), proximity transducers (PRO line), wireless sensors (Connect line), ultrasonic sensors and mounting accessories: cables, connectors, magnetic bases, junction boxes.
How do I choose between an accelerometer and an LP sensor with 4–20 mA?
The accelerometer gives the complete dynamic signal, useful for spectral analysis with a collector or an online system. The LP sensor transmits only the overall vibration level as 4–20 mA, suitable for alarm and shutdown in the PLC. LP200 and LP500 measure velocity, LP300 and LP600 acceleration.
How fast do we receive CTC sensors?
CTC sensors and accessories can ship in 24–72 h when the item is in stock, locally or at the supplier; the rest is supplied to order, usually in 1–4 weeks. For large sets of proximity transducers, depending on the specification, the lead time can be longer.
Can I replace an accelerometer from another source with a CTC one?
Often yes, if the sensitivity, the mounting thread, the connector, the frequency range and the power supply match. Send us the data sheet of the old sensor or photos of the label and the connector, and we check which CTC model has the same characteristics.
What data do I send for a quotation for CTC vibration sensors?
The machine type and speed, the number of measuring points, whether you need a dynamic signal or 4–20 mA, the sensitivity, the mounting (stud, magnet, adhesive), the cable length and the possible Ex classification of the area. For LP sensors state whether the 4–20 mA signal must represent velocity or acceleration.
How do I request a Connection Technology Center quotation?
Send the Connection Technology Center code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: Connection Technology Center, Inc. (manufacturer documentation)

