Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

EuroSMC supplier in Romania

Electronic electrical test equipment for substations and protection relays

Founded in 1986 · Headquarters: Madrid, Spain

Request a quote

Who is EuroSMC and what does it make?

EuroSMC is a Spanish manufacturer of electronic equipment for testing electrical protection, based in Madrid, active since 1986 (initially as SMC — Soluciones de Medida y Control, rebranded EuroSMC from 1991). The range covers circuit breaker timers (the PME series), three-phase secondary injection for protection relays (Quasar, Mentor-12), dynamic micro-ohmmeters (PRIME 600, PRIME 200) and GOOSE/IEC 61850 monitoring instruments.

The Quasar three-phase tester delivers 300V/60A at a weight of 19.5 kg, designed for field tests on protection relays without a bulky external source, while the Mentor-12 allows simultaneous testing of two three-phase relays — a direct time advantage for substation commissioning teams. The PRIME dynamic micro-ohmmeters are used to check the contacts of high-voltage circuit breakers, while the PME series of circuit breaker timers (PME-500/600/700-TR) covers classic testing of opening-closing times. The company has certifications and declarations of conformity stated in the manufacturer's documentation.

For Romania, the EuroSMC range is aimed at testing laboratories and maintenance teams in electrical substations who carry out commissioning or periodic checks of protection relays and high-voltage circuit breakers.

What do we supply from the EuroSMC range?

ProductDescription
Quasar Secondary Injection SystemPortable three-phase tester, 300V/60A, 19.5 kg, for testing protection relays directly in the substation, available in several variants, which we confirm by code, from the manufacturer's documentation. The customer states the type of relays tested and the number of channels required.
Mentor-12 Secondary Injection SystemHigh-capacity system that allows simultaneous testing of two three-phase relays, reducing commissioning time at substations with a large number of protection relays. Typical application: commissioning and periodic checks in high-voltage substations.
PME Series Circuit Breaker TimersInstruments for measuring opening-closing times of circuit breakers (PME-500-TR, PME-600-T, PME-700-TR), used for maintenance and commissioning of high-voltage circuit breakers. The customer sends the type of circuit breaker tested.
PRIME Dynamic Micro-ohmmetersPRIME 600 and PRIME 200, dynamic micro-ohmmeters with an internal rechargeable battery, for checking the contacts of high-voltage circuit breakers directly in the field, without continuous external power.

Why EuroSMC?

  • The Quasar three-phase tester delivers 300V/60A at 19.5 kg, useful for field tests without an external source
  • Mentor-12 tests two three-phase relays simultaneously, reducing commissioning time in substations
  • PRIME 600/200 dynamic micro-ohmmeters for checking the contacts of high-voltage circuit breakers
  • Certifications and declarations of conformity according to the manufacturer's documentation for the test equipment range
  • GOOSE/IEC 61850 monitoring instruments for modern digital substations

Which EuroSMC codes and series are requested most often?

CodeDescription
QuasarPortable three-phase tester 300V/60A, 19.5 kg
Quasar-Cvariant of the Quasar secondary injection system
Quasar-C+variant of the Quasar secondary injection system
Quasar-Vvariant of the Quasar secondary injection system
Mentor-12Injection system for testing two three-phase relays simultaneously
PTE-100-CSingle-phase relay tester
PTE-100-C ProImproved variant of the PTE-100-C
PTE-100-C PlusSingle-phase variant of the PTE-100-C series
PTE-50-CELower-power single-phase tester
PTE-100-VSingle-phase relay tester
UNORelay test system
PME-600-TCircuit breaker timer
PME-500-TRCircuit breaker timer
PME-700-TRCircuit breaker timer
PRIME 600Dynamic micro-ohmmeter with internal battery
PRIME 200Portable dynamic micro-ohmmeter
PME-20-PHPhase angle meter for substation maintenance
PME-ATKComplete angular transducer kit for PME

Where is EuroSMC equipment used?

  • Electrical substations — commissioning and checking of protection relays
  • High-voltage circuit breaker maintenance — contact timing
  • Electrical testing laboratories — testing of protection equipment
  • Power plants — periodic checks of relay protection systems

How do we supply EuroSMC in Romania?

For EuroSMC we describe the range exactly as it appears in the documentation of the manufacturer in Madrid. We can supply equipment from the Quasar, Mentor-12, PME and PRIME series to order, usually in 1–4 weeks. For a quotation, send the type of relays or circuit breakers tested and the number of channels required.

Calibration and warranty service for EuroSMC equipment remain outside our offer — calibration certificates are obtained on request, through us, or from an accredited laboratory.

Frequently asked questions about EuroSMC

What product range does EuroSMC have?

EuroSMC makes electronic test equipment for electrical protection: primary current injection for circuit breakers, three-phase secondary injection for protection relays, dynamic micro-ohmmeters and GOOSE/IEC 61850 monitoring instruments. The company is Spanish, based in Madrid, active since 1986.

What is the difference between Quasar and Mentor-12?

Quasar is a portable 19.5 kg three-phase tester for field tests on a single relay, while Mentor-12 allows simultaneous testing of two three-phase relays, useful at substations with a large commissioning volume where time matters.

What outputs and weight does the EuroSMC Quasar three-phase test set have?

Quasar has 4 voltage outputs of 300 V and 3 current outputs of 60 A, switchable to 7 current outputs. It also has 6 binary inputs, 4 binary outputs and 6 low-level outputs for sensors and meters. It weighs 19.5 kg and includes Wi-Fi, Ethernet and an IEC 61850 port. We confirm the exact variant with the quotation.

What information do you need for a quotation for a EuroSMC tester?

State the type of equipment tested (relay, circuit breaker), the rated voltage and current of the installation, and whether you need a timing function or only signal injection.

How do I request a EuroSMC quotation?

Send the EuroSMC code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: EuroSMC (manufacturer documentation)