Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

GFUVE supplier in Romania

Meter test benches, portable reference standards and CT/PT analysers

Founded in 2005

Request a quote

Who is GFUVE and what does it make?

GFUVE GROUP is a Chinese manufacturer of electrical test equipment, founded in 2005, with five subsidiaries and its own research and development centre. The range starts from the verification of electricity meters: stationary multi-position benches, portable field systems, reference meters and standard power sources. From there it extends to analysers for current and voltage transformers (CT/PT), relay testers, recording ammeters for high voltage and verification equipment for electric vehicle charging stations.

The working ranges are clearly stated: accuracy classes from 0.2% down to 0.02%, currents from 1 mA to 120 A and voltages from 0.01 V to 500 V, with the meter benches built to the IEC 60736 standard. GF3000 is a stationary three-phase multi-position bench, with no-load, starting current, influence quantity and error repeatability tests. GF302D3 brings class 0.02 into a portable bench, and GF6019D measures DC meters up to 600 A and 1150 V, a niche that is increasingly common with the spread of fast charging.

Equipment of this kind is used in the metrology laboratories of network operators, in workshops that verify billing meters, at meter importers and assemblers and in laboratories building their own working standard. The choice depends on how many meters are verified at the same time, on the class of the meters tested and on the standard required by the laboratory. The details are set on the exact model, because two benches with similar names can differ in the number of positions and in the power source.

What do we supply from the GFUVE range?

ProductDescription
GF3000Stationary three-phase multi-position bench for energy meters, built to IEC 60736. It runs no-load, starting current, influence quantity and repeatability tests, with the error measured automatically; a GF3000-ANSI version also exists.
GF302D3Portable three-phase meter bench, class 0.02, with a range of 0–120 A and 0–500 V, four-quadrant measurement, programmable load points and a precision output current of 1 mA. It is used both in the laboratory and on the move.
GF312V2Portable multifunction three-phase calibrator, class 0.02, 0–120 A and 0–600 V, with a 7-inch touch screen, CT/PT ratio test and harmonics measurement from the second to the 63rd. It serves as a working standard or as a field analyser.
GF6019DPortable precision equipment for testing DC energy meters, at 600 A and 1150 V, class 0.05 or 0.02, with stability of 0.01% per minute and an 8-inch touch screen.

Why GFUVE?

  • Accuracy classes from 0.2% to 0.02% — the same family covers field verification and laboratory work
  • Range 1 mA…120 A and 0.01…500 V — allows the starting test at very low currents required of modern meters
  • GF3000 multi-position bench — tests starting, no-load running, influence quantities and repeatability in three phases
  • GF6019D for DC meters — 600 A and 1150 V, useful for verifying meters in charging stations
  • Portable systems GF302D, GF312 and GF313 — verification on site, with 1P2W, 1P3W, 3P3W and 3P4W connections

Which GFUVE codes and series are requested most often?

CodeDescription
GF3000Stationary three-phase multi-position bench, IEC 60736
GF3000-ANSIANSI version of the three-phase multi-position bench
GF1000Single-phase bench with 6, 12, 24 or 48 positions
GF1000-ANSISingle-phase bench for ANSI meters, with 6–48 positions
GF302DPortable three-phase equipment, 0–120 A / 0–600 V, class 0.05 / 0.1
GF302D-ECTPortable three-phase, class 0.02 / 0.05 / 0.1, small-signal meter test
GF302D1Portable three-phase, 0–120 A / 0–500 V, predefined test schemes
GF302D3Portable three-phase bench, class 0.02
GF302D1SPortable system with integrated standard and current and voltage source
GF1021Portable single-phase system, class 0.05, 8 kg
GF102Portable single-phase bench with 1 or 3 positions, class 0.02 or 0.05
GF6019DDC meter test, 600 A / 1150 V
GF312V2Portable multifunction three-phase calibrator, class 0.02
GF312V2SPortable precision field standard, class 0.02
GF313V2Field test set, 0–200 A / 0–600 V, class 0.2
GF111BSingle-phase reference meter with 100 A CT clamp, class 0.04

Where is GFUVE equipment used?

  • Metrology laboratories of network operators — verification and calibration of billing meters
  • Meter importers and assemblers — series testing on multi-position benches
  • Meter service — single-phase and three-phase verification on site
  • Electric vehicle charging stations — DC meters verified with dedicated equipment

How do we supply GFUVE in Romania?

We can prepare quotations for GFUVE meter test benches, reference meters and portable calibrators. The equipment is supplied to order, usually in 1–4 weeks; for specially configured multi-position benches the lead time may be longer. For an accurate quotation we need the type of meters (single-phase or three-phase, AC or DC), the accuracy class wanted, the number of positions, the maximum current and voltage and the standard applied in the laboratory, IEC 60736 or ANSI. The exact lead time and the configuration are confirmed in the quotation, after we check the data received.

Repairs and recalibrations for this brand are outside our standard offer; whether they are possible is checked on each order.

Frequently asked questions about GFUVE

What products does GFUVE make?

GFUVE GROUP has made electrical test equipment in China since 2005. The core of the range is the verification of energy meters: stationary benches, portable systems, reference meters and standard sources. Besides these there are CT/PT analysers, relay testers and equipment for verifying charging stations.

What accuracy class should the standard have for my meters?

The standard should be several times finer than the meter being verified. The GFUVE family runs from class 0.2 to 0.02, so for billing meters of class 0.5 or 0.2 a class 0.05 or 0.02 is usually discussed. If you send us the class of your meters, we tell you which model suits.

Can I order GFUVE equipment for a laboratory in Romania, and how quickly?

Yes, to order. The lead time to order is usually 1–4 weeks, and for specially configured multi-position benches it may be longer. The exact lead time is set in the quotation, according to the configuration chosen.

Can I replace an older meter bench with a GFUVE model?

Compatibility depends on the type of meters, the number of positions and the software interface. We confirm equivalences only after checking. For the analysis we need the make and model of the current bench, the number of positions, the maximum current and voltage and the control protocol used.

What data should I provide for a quotation for a GFUVE bench?

State whether you test single-phase or three-phase meters, in alternating or direct current, what accuracy class you need, how many simultaneous positions you want and what the maximum current and voltage are. If the laboratory works to IEC 60736 or to ANSI C12.1, mention this.

How do I request a GFUVE quotation?

Send the GFUVE code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: GFUVE GROUP (manufacturer documentation)