Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Hines Automation supplier in Romania

Rotor balancing and straightening machines

Founded in 1979 · Headquarters: Ann Arbor, Michigan, USA

Request a quote

Who is Hines Automation and what does it make?

Hines Automation, based in Ann Arbor, in the state of Michigan, has built dynamic and static balancing machines for rotors since 1979. It began with machines for automotive drive shafts, then extended the technique to pump rotors, and today the range also includes shaft straightening machines, mass centering machines and moment matching systems for connecting rods.

The design logic is the same on all models: a rigid suspension ("hard bearing"), calibrated once for the whole life of the machine, so that the part can be corrected directly on the machine, without recalibration for every item. The HC series, with a cradle support, covers rotors up to 20,000 lbs, the HO series uses a horizontal overhung spindle for two-plane correction, and the HVS measures statically, without rotation, abrasive discs, fans and propellers. The segmentation function, standard on all machines, breaks the unbalance down onto the zones where it can actually be corrected.

In Romania, the interest comes from repair shops for pumps and electric motors, from departments that recondition turbochargers or cardan shafts and from fan manufacturers. The machines can be manual, semi-automatic or automatic, and the company also offers reconditioning of older equipment, calibration, certification and spare parts for machines already installed.

What do we supply from the Hines Automation range?

ProductDescription
HC — horizontal balancing with cradleUniversal machine for rotors in one or two planes, with the part supported on a cradle. It is used for armatures, rotors, crankshafts, turbocharger compressors and other long-shaft parts, up to approximately 20,000 lbs, with optional automation.
HO — horizontal overhung balancingMachine with an integrated spindle, on which the rotor is mounted directly, without belts or pulleys. It corrects force and couple unbalance, and indexing to the correction angle eases manual work on large rotors.
HVS — vertical static balancingBalancer without rotation, for single-plane correction, in which the part rests on a rigid pivot and the tilt is read electronically. Suited to abrasive discs, fans, propellers, wheels and refiner plates.
Straightening and mass centering machinesComputer-controlled machines that straighten shafts, axles and tubing after measuring radial runout at one to five points, plus mass centering systems for parts where adding or removing material is not possible.

Why Hines Automation?

  • Rigid suspension, permanently calibrated — the machine needs no recalibration for every item, and the part is corrected without being removed from the support
  • Unbalance segmentation, standard — correction is distributed over the accessible zones of the part, useful on rotors with few places to add or remove mass
  • Several correction methods on the same machine — drilling, milling or grinding can be integrated into the balancing cycle
  • From manual to robotised — the same family of machines can be extended with automatic loading/unloading as volume grows
  • The manufacturer's reconditioning and calibration programme for the existing fleet — Hines machines and those of other manufacturers, with computer and software updates

Which Hines Automation codes and series are requested most often?

CodeDescription
HCHorizontal balancing machine with cradle, one or two planes
HOHorizontal overhung balancing machine, integrated spindle
HVSVertical static balancer, no rotation, single plane
HVRVertical balancing machine with rotating spindle for parts without a shaft
DL500Multi-plane dynamic balancing system for drive shafts
Mass centeringMass centering machines for wheels, crankshafts, fans, rotors
Moment matchingWeighing and moment sorting systems for connecting rods, 0.1 g scale
StraighteningStraightening machines for shafts and axles with radial runout measurement
Turbocharger machinesBalancing machines for turbocharger components or assemblies

Where is Hines Automation equipment used?

  • Industrial pumps — balancing and reconditioning of rotors
  • Electric motors and rotating machines — armature and rotor balancing
  • Turbochargers — machines for the turbine, compressor or complete assembly
  • Fans, propellers and abrasive discs — single-plane static balancing
  • Transmissions and cardan shafts — balancing and assembly on the reconditioning line

How do we supply Hines Automation in Romania?

We can take requests for Hines balancing machines, for spare parts and for the manufacturer's update services for equipment already installed. A new balancer is usually configured for the application, so it is supplied to order, with a time that may be longer than for a standard item; the exact time is confirmed in the quotation. For a useful answer, send us the maximum mass of the part, the diameter and length, the number of correction planes, the method wanted (drilling, milling, adding mass) and the volume of parts per shift. If it concerns an existing machine, add the model and the year of manufacture.

Manufacturer support for an older part or machine is established from its code, and automated configurations need an analysis of the application.

Frequently asked questions about Hines Automation

What does Hines Automation make?

Hines Automation builds dynamic and static balancing machines for rotors in Ann Arbor, plus shaft straightening machines, mass centering systems and moment matching systems for connecting rods. The HC, HO, HVR and HVS series differ by spindle position and by the number of correction planes, and the company also reconditions older machines.

How do I choose between a horizontal and a vertical balancing machine?

Long-shaft parts, such as motor rotors or shafts, suit a cradle or a horizontal spindle (HC, HO). Flat parts without a shaft, such as fans or flywheels, load more easily on a vertical spindle. For single-plane correction, without rotation, there is the HVS. Send us the drawing or the mass and dimensions of the part.

Can you supply a Hines machine in Romania and how long does it take?

Yes, to order. The balancer is configured for the customer's part, so the time depends on the model chosen and the degree of automation and can be longer, depending on the specification. Simple spare parts can arrive sooner, depending on the item; a quotation with an exact time follows the analysis of the application.

Can my old balancing machine be modernised?

Reconditioning can include replacing mechanical or electrical components and pickups, and updating the computer and software. The reconditioning programme applies to machines up to 12 years old. To check a specific case we need the model, serial number, year and a photo of the nameplate.

What details should I send for a balancing machine quotation?

The maximum and minimum mass of the part, the rotation diameter, the length, the number of correction planes, the working speed, the correction method wanted and the volume of parts per shift. If you are replacing an existing machine, add its model, so that we can check the compatibility of the clamping devices.

How do I request a Hines Automation quotation?

Send the Hines Automation code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Hines Automation (manufacturer documentation)