Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Guided Ultrasonics (GUL) supplier in Romania

Guided wave equipment for pipe screening and monitoring

Founded in 1999 · Headquarters: London, United Kingdom

Request a quote

Who is Guided Ultrasonics (GUL) and what does it make?

Guided Ultrasonics Limited, known as GUL, is a British company based in London, founded in 1999 by members of a research team at Imperial College. It makes equipment for Guided Wave Testing (GWT), a non-destructive method in which a long section of pipe is examined from a single sensor mounting point, including where direct access is not possible: buried, insulated or supported pipes. The company sells instruments and monitoring systems, not inspection services.

For an integrity or maintenance engineer, the point is early detection of corrosion and erosion on pipe networks where stripping all the insulation would be slow and costly. The range is split into three lines. Screening is done with the Wavemaker instrument, in the G5 generation with an IP54 housing, a touchscreen usable with gloves and two hot-swappable batteries. Quantitative scanning is done with the QSR system, which uses EMAT (electromagnetic acoustic) sensors and produces a residual wall thickness profile. Permanent monitoring uses gPIMS sensors, which stay mounted on the pipe.

This kind of equipment is justified at operators of crude oil and gas transmission pipelines, in refineries and petrochemical sites, in the steam networks of heating plants and, through the G-scan system, for rail inspection on railway infrastructure. These are instruments bought per project, not shelf items, so a useful discussion starts with the diameter, material, insulation and access to the section to be checked.

What do we supply from the Guided Ultrasonics (GUL) range?

ProductDescription
Wavemaker G5Guided wave screening instrument for pipes, in a compact IP54 housing, with an integrated computer, a glove-compatible touchscreen and dual hot-swappable batteries; it is intended for field inspection, offshore, upstream, midstream and downstream, including buried and insulated pipes.
QSR systemQuantitative scanning platform with EMAT sensors, made up of the ePOD unit, sensors, positioning frames, motors and WaveProQSR software; it produces the residual thickness profile, in a circumferential or axial configuration, and the QSR-ALF frame targets large diameters.
gPIMSA line of sensors permanently installed on the pipe, with scheduled collection through a portable Wavemaker or automatic collection through a battery-powered field unit, with Wi-Fi, cellular or cable transmission; the data reach the Monitoring Studio cloud software.
G-scan Rail InspectionRail instrument, introduced in 2005 with the support of Network Rail, which sends guided waves along the rail to detect cracks and corrosion, including in the foot, frequently when checking level crossings; standard sizes CEN50, CEN54, CEN56 and CEN60.

Why Guided Ultrasonics (GUL)?

  • A method developed at Imperial College in the 1990s — long pipe sections are checked from a single mounting point, without stripping insulation along the whole length
  • Wavemaker G5 with an IP54 housing and two hot-swappable batteries — works continuously in the field, including on buried or insulated pipes
  • QSR system with non-contact EMAT sensors — gives a residual thickness profile, not just a qualitative indication
  • Permanently mounted gPIMS sensors, with scheduled or automatic data collection — track the progress of corrosion between two shutdowns
  • G-scan instrument for rails — sends guided waves along the rail to detect cracks and corrosion, including in the foot

Which Guided Ultrasonics (GUL) codes and series are requested most often?

CodeDescription
Wavemaker G5Guided wave screening instrument, G5 generation
Wavemaker G4G4 generation electronics used in G-scan and subsea systems
QSR1Quantitative residual thickness scanning system
QSR AxialScanning configuration with axial propagation
QSR-ALFScanning frame for large-diameter pipes
QSR ePODCommon electronic unit for QSR configurations
WaveProQSRControl and reporting software for QSR
gPIMSMonitoring sensors permanently installed on the pipe
Monitoring StudioCloud software for monitoring data
Scanning StudioSoftware for scanning data
G-scanGuided wave instrument for rails, sizes CEN50–CEN60
Subsea G4miniElectronic unit for subsea rings with ROV or diver

Where is Guided Ultrasonics (GUL) equipment used?

  • Crude oil and gas transmission pipelines — screening of buried, insulated or limited-access sections
  • Refineries and petrochemicals — insulated pipe networks, pipe supports and hard-to-reach points
  • Heating plants — checking steam and hot water pipes without extensive insulation removal
  • Railway infrastructure — inspection of rails and of the areas at level crossings
  • Offshore platforms — screening rings for subsea pipes, fitted by divers or by remotely operated vehicles (ROV)

How do we supply Guided Ultrasonics (GUL) in Romania?

We can take requests for GUL screening, scanning and monitoring instruments, as well as for the related consumables and accessories, starting from the configuration your project needs. We supply the equipment to order; as these are systems configured per project, the lead time can be longer than for ordinary parts and is confirmed in the quotation. For an accurate quotation, send the pipe diameter and wall thickness, the material, the type and thickness of the insulation, the operating temperature and whether the section is buried or above ground. For monitoring, also state the number of measuring points required.

The availability of a system configuration is checked on request; we supply the equipment, and operator qualification is separate from delivery.

Frequently asked questions about Guided Ultrasonics (GUL)

What does Guided Ultrasonics (GUL) make?

GUL makes guided wave testing equipment for pipes: the Wavemaker screening instrument, the QSR quantitative scanning system with EMAT sensors and the gPIMS sensors for permanent monitoring. The company, founded in 1999 in London, also has an instrument dedicated to railway rails, G-scan.

How do I choose between Wavemaker, QSR and gPIMS?

Wavemaker looks for suspect areas along a long section; QSR then measures the residual thickness profile in an area already identified, and gPIMS tracks a fixed point over time. The choice depends on the question you need answered: where the defect is, how deep it is or how fast it is developing.

Do you supply GUL equipment in Romania and how soon?

Yes. Equipment is supplied to order. These are systems configured per project, so the lead time can be longer than for ordinary parts; we confirm it in the quotation, once we know the exact configuration.

Can I replace an older Wavemaker with the G5 generation?

Compatibility is confirmed after checking. G-scan and subsea devices use G4 electronics, and G5 is a new generation. Send us the model and serial number of your current unit, the accessories used and the software version, so that we can check what can be reused.

What information do you need for a quotation on guided wave systems?

The outside diameter and wall thickness, the pipe material, the insulation, the operating temperature, the access to the section and the type of check wanted: screening, scanning or monitoring. For rails, the profile is also needed (for example CEN54 or CEN60).

How do I request a Guided Ultrasonics (GUL) quotation?

Send the Guided Ultrasonics (GUL) code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Guided Ultrasonics Ltd (manufacturer documentation)