Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Hansford Sensors supplier in Romania

Vibration sensors for equipment condition monitoring

Request a quote

Who is Hansford Sensors and what does it make?

Hansford Sensors is a British manufacturer of vibration sensors for predictive maintenance of rotating equipment. The company designs industrial accelerometers with current output (4-20mA), variants with dual velocity and acceleration output, as well as switches and complete vibration monitoring systems, designed for direct mounting on bearing housings, fans, pumps and electric motors. The range includes both standard variants for ordinary industrial halls and intrinsically safe versions for explosive-atmosphere zones.

What sets the Hansford platform apart is mounting flexibility: the range includes variants with top or side mounting, with an optional additional temperature output (via analogue signal or PT100) and with connectors or integrated cables in several configurations. The HS-421 and HS-422 series combine the velocity signal on a current loop with the raw acceleration waveform, useful for later spectral analysis.

The Hansford range covers both retrofitting existing measuring points and extending a continuous monitoring system to new equipment, without changing the principle of connection to the existing automation.

What do we supply from the Hansford Sensors range?

ProductDescription
HS-420 Series — Accelerometers with 4-20mA OutputThe basic family of the Hansford range, with top or side mounting (S variant) and velocity output on a 4-20mA current loop, directly compatible with most automation systems. Also available with an additional temperature output (T — analogue signal, RT — PT100) and in an intrinsically safe variant (I/M) for classified zones. Connection through a 2-pin MS connector, M12 connector or integrated cable with several jacket types, depending on the installation environment. Typical application: continuous monitoring of bearings on fixed-mounted fans, pumps and electric motors.
HS-421/HS-422 Series — Dual Output AccelerometersVariants with dual output: the velocity signal on a 4-20mA loop for fast alarming in the automation system, plus the raw AC acceleration signal for later spectral analysis with a data collector or an FFT analyser. The T/RT variants add a temperature output. Also available in an intrinsically safe variant (HS-421I). Useful where a single mounting point must cover both automatic protection and detailed fault diagnosis.
HS-473 — AccelerometerAccelerometer from the Hansford range for monitoring vibration on rotating equipment. The exact configuration (axes, mounting, outputs) and the parameters are confirmed on the datasheet of the model, before the quotation.

Why Hansford Sensors?

  • Standard 4-20mA output, compatible with the 4-20mA analogue inputs of PLCs and SCADA systems
  • Dual HS-421/HS-422 variants that combine velocity on a current loop with raw acceleration for spectral analysis
  • Intrinsically safe versions (I/M) for explosive-atmosphere zones
  • The HS-473 accelerometer, whose parameters are confirmed on the manufacturer's datasheet
  • Additional temperature output options (analogue or PT100) on most accelerometer families

Which Hansford Sensors codes and series are requested most often?

CodeDescription
HS-420Accelerometer with 4-20mA output, top mounting
HS-421Dual output: 4-20mA velocity plus AC acceleration
HS-420TVariant with additional analogue temperature output
HS-420RTVariant with temperature output via PT100
HS-420I/MIntrinsically safe variant for classified zones
HS-421IDual output, certified intrinsically safe
HS-420ITIntrinsically safe, with additional temperature output
HS-420SSide mounting, 4-20mA velocity output
HS-420STSide mounting, with temperature output
HS-420SRTSide mounting, temperature via PT100
HS-473Hansford accelerometer, configuration according to the datasheet
HS-422Top-mounted accelerometer, dual output
HS-422TTop mounting, with temperature output
HS-422RTTop mounting, temperature via PT100
HS-422I/MTop mounting, intrinsically safe variant

Where is Hansford Sensors equipment used?

  • Metallurgy — monitoring of process fans and rolling lines
  • Cement — continuous supervision of mills and conveyors
  • Marine — vibration on auxiliary engines and shipboard gearboxes
  • Wind energy — nacelle-mounted sensors for gearboxes and generator
  • Oil and gas — intrinsically safe variants for classified zones
  • Food industry — measuring points with limited access and hygiene requirements

How do we supply Hansford Sensors in Romania?

We supply Hansford vibration sensors for fixed measuring points on bearing housings, fans and pumps, in standard or intrinsically safe variants. We work only from the information in the manufacturer's technical documentation; we supply the sensors to order, usually within 1–4 weeks depending on the exact configuration requested. For an accurate quotation, we need the complete code wanted (mounting, output, connector) or the exact application and the type of automation the sensor connects to. The firm lead time is stated after the manufacturer's confirmation for the specific configuration.

The sensitivity and frequency range for each connector variant are stated in the quotation, on the code chosen.

Frequently asked questions about Hansford Sensors

What does a Hansford Sensors HS-420 series accelerometer measure?

It measures the vibration velocity of rotating equipment and transmits it as a standard 4-20mA signal to a PLC or SCADA system. Mounted on the bearing housing of a fan, motor or pump, the signal rises as a mechanical fault develops, which allows a maintenance intervention to be scheduled before an unplanned stoppage.

What is the difference between the HS-420 and HS-421 series?

HS-420 transmits only the velocity signal on a 4-20mA loop, useful for simple alarming in automation. HS-421 also adds the raw AC acceleration signal, which can be analysed spectrally with a data collector to identify the exact type of fault — imbalance, misalignment or bearing wear.

Do you supply Hansford Sensors products in Romania, and within what time?

Yes, we supply them to order, usually within 1–4 weeks, depending on the exact configuration (mounting, output, connector) and on the availability confirmed by the manufacturer.

What details should I specify for a quotation for Hansford accelerometers?

The complete code wanted or, if you do not know it, the type of mounting available on the equipment, the output required (velocity, dual or with temperature) and whether the area is classified as an explosive-atmosphere zone. With this data we then check the right configuration in the manufacturer's documentation.

How do I request a Hansford Sensors quotation?

Send the Hansford Sensors code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Hansford Sensors (manufacturer documentation)