Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Atos supplier in Romania

We regularly receive quotation requests for Atos DLHZO Directional Proportional Valves, so we have the documentation and the usual codes of the range to hand.

Founded in 1957 · Headquarters: Sesto Calende, Italy

Request a quote

Who is Atos and what does it make?

Atos is an Italian manufacturer specialised in precision industrial hydraulics - proportional valves, pumps, cylinders, control electronics. Atos systems are used in hydraulic presses, plastic injection moulding machines and test benches, in applications that require precise control of pressure, flow and position. Atos directional servo-proportional valves, for example those in the DLHZO series, have an LVDT position transducer and integrated control electronics.

The PVPC series variable displacement axial piston pumps have displacements between 29 and 160 cm³/rev and mechanical controls (pressure compensator, load sensing, constant power) or proportional controls. On the PVPC-C-5073 model (73 cm³/rev, with manual pressure compensator) the displacement decreases as the system pressure approaches the set value, so the pump consumes only the power the load requires, not the maximum flow continuously.

Atos E-ME-AC series control electronics are an electronic driver in Eurocard format for proportional valves without an integrated transducer; it regulates the solenoid current and can be used in pressure, flow or position control systems, in open or closed loop, with a 0-5 V, ±5 V or 4-20 mA reference signal. The PED directive applies to pressure components, according to the documentation.

The Atos DHI series comprises directly solenoid-operated spool hydraulic directional valves, with ISO 4401 size 06 interface, for flows of up to 60 l/min and pressures of up to 350 bar, with interchangeable coils, specific to alternating or direct current. Atos marks DHI as a series being phased out, not recommended for new applications; in the current range, also for size 06, there is the DHE series, with a flow of up to 80 l/min. For replacements we compare the configuration, spool, coil voltage and connector on the complete code.

What do we supply from the Atos range?

ProductDescription
Atos DLHZO Directional Proportional ValvesDirectional servo-proportional valves with LVDT position transducer and integrated analogue electronics, for precise flow and direction control. According to the Atos documentation, directional servo-proportional valves come in ISO sizes 06–35, and the DLHZO/DLKZOR-TES sleeve families (sizes 06–10) reach flows of up to 130 l/min and a maximum pressure of 350 bar. Typical applications: speed and position control of hydraulic cylinders.
Atos PVPC Variable Displacement Axial Piston PumpsVariable displacement axial piston pumps. The PVPC series covers displacements between 29 and 160 cm³/rev (sizes 3029, 4046, 5073, 5090, 6140, 6160), with maximum pressures of 250-350 bar depending on size. The mechanical controls available are the manual (C) or remote (R) pressure compensator, load sensing (L) and constant power (LW); there are also versions with proportional pressure, flow or p/Q controls. The PVPC-C-5073 model has a displacement of 73 cm³/rev and a manual pressure compensator (C).
Atos E-ME-AC Electronic Driver for Proportional ValvesElectronic driver in Eurocard format for proportional valves without an integrated transducer (for example the RZGO, KZGO, RZMO, DHZO, DKZOR, DPZO-A series). According to the Atos documentation, it controls the solenoid current with a PWM signal and accepts 0-5 V, ±5 V or 4-20 mA reference signals, with bias, scale and ramp adjustments; it can be used in pressure, flow or position control systems, in open or closed loop.
Atos CK Tie-Rod Hydraulic CylindersTie-rod hydraulic cylinders, according to ISO 6020-2, for industrial applications. According to the Atos documentation, the bores range from 25 to 200 mm, and the maximum pressure is 250 bar.

Why Atos?

  • Servo-proportional valves with LVDT position transducer, for precise position and flow control
  • E-ME-AC electronic drivers for proportional valves, usable in open or closed loop control systems
  • Energy efficiency: PVPC variable displacement pumps, which adapt the flow to the load requirement
  • Wide range of hydraulic components: valves, pumps, cylinders, filters, hydraulic power units and electronic drivers
  • Compliance for pressure equipment and Ex valve versions for explosive areas, according to the manufacturer's documentation
  • Free Atos E-SW software for configuring, diagnosing and updating digital drivers

Which Atos codes and series are requested most often?

CodeDescription
Proportional valvesProportional hydraulic valves for fine pressure and flow control
Axis and p/Q controlsElectronic controllers for axes and pressure-flow control
On-off valvesOn-off hydraulic valves for direct switching
Cylinders and servocylindersStandard hydraulic cylinders and precision servo-cylinders
Pumps and servopumpsFixed displacement hydraulic pumps and variable displacement servo-pumps
FiltersHydraulic filters for the pressure and return line
Power unitsComplete hydraulic power units with pump, motor and tank
BlocksModular hydraulic manifold blocks for compact valve mounting
SubplatesSubplates for mounting valves on the circuit
Electronic driversElectronic control modules for proportional valves and servo valves
ISO cartridgesHydraulic cartridges with mounting to ISO standards
Directional solenoid valvesDirectional valves with solenoid actuation and DIN or Deutsch connectors
Screw-in cartridge valvesScrew-in cartridge valves, up to 1 5/16 inches
DHISpool hydraulic directional valve, direct operation, ISO 4401 size 06; series being phased out
DHESpool hydraulic directional valve from the current range, ISO 4401 size 06, up to 80 l/min

Atos series with English pages

Where is Atos equipment used?

  • Plastic injection moulding (injection moulding machines)
  • Metalworking (hydraulic presses, stamping, bending)
  • Automotive (assembly presses, test benches)
  • Steel and metallurgy (rolling mills, hydraulic shears)
  • Construction (excavators, cranes)
  • Materials testing (universal testing machines)
  • Packaging (baling presses)

How do we supply Atos in Romania?

At Infinitrade we work from the manufacturer's technical documentation for the Atos industrial hydraulics range and bring the components in to order. For valves and cylinders in the usual sizes we can sometimes confirm 24–72 h when the item is in stock, locally or at the supplier, while for systems integrated with electronic controllers the lead time to order is usually 1–4 weeks, depending on the configuration. An exact lead time is confirmed after checking real availability at the supplier. For an accurate quotation, send us the working pressure, the flow required and the type of control wanted (proportional or on/off), and we will come back with the confirmed lead time.

Advanced configuration of E-ME controllers or on-site PID tuning is outside our offer; it requires direct technical support from Atos.

Frequently asked questions about Atos

Which Atos hydraulic valve ranges are available for proportional control?

Atos produces proportional valves for fine pressure and flow control, alongside dedicated electronic controllers for axes and pressure-flow loops. The range covers everything from simple, direct-operated valves to pilot-operated versions, for industrial applications with high precision requirements. The right choice depends on the maximum working pressure, the flow required and the type of control signal available in the installation.

What should I send for a quotation for a replacement Atos valve?

For an accurate quotation you need the complete code from the label of the existing valve, the maximum working pressure, the nominal flow and the type of electrical connector (DIN, AMP or Deutsch). If the label is no longer legible, a clear photo of the installed valve, together with the connection dimensions, helps us identify the compatible family and version in the Atos portfolio.

What ISO 4401 size and what pressure does the Atos DLHZO servoproportional valve have?

DLHZO is a direct-operated servoproportional directional valve, size 06 according to ISO 4401, with a zero-overlap spool, an LVDT transducer and an integrated digital driver (TEB or TES). The pressure at ports P, A, B is up to 350 bar, and the maximum permitted flow ranges from 8 to 70 l/min, depending on the spool type. The complete code is confirmed in the quotation.

What is the difference between a pump and a servo-pump in the Atos range?

In the Atos catalogue, the Pumps and servo-pumps category includes variable displacement axial piston pumps (PVPC series), with mechanical or proportional pressure, flow or p/Q controls. The suitable version is chosen according to the maximum pressure, the flow and the type of control needed; we confirm it by code, from the Atos documentation.

Do you still quote Atos DHI hydraulic directional valves?

Yes, we quote DHI on the complete code from the nameplate. Because Atos has placed the DHI series in phase-out, for new applications we also look at the DHE series, with the same ISO 4401 size 06 interface. Send us the configuration (for example 61, 63 or 71), the spool type, the coil voltage, the connector and the seal material (NBR, FKM or HNBR).

How do I request a Atos quotation?

Send the Atos code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Atos S.p.A. (manufacturer documentation)