Baker Hughes supplier in Romania
Baker Hughes makes equipment for extraction, processing and transport in the oil and gas industry
Founded in 1987 · Headquarters: Houston, Texas, USA
Who is Baker Hughes and what does it make?
Baker Hughes is an American manufacturer of equipment for the energy industry, headquartered in Houston, Texas. The company makes gas turbines, centrifugal and axial compressors, centrifugal process pumps and vibration monitoring systems for rotating machinery, under the Bently Nevada brand. From this range we can quote equipment and components for compression stations, power plants and process lines, chosen according to the flow rate, pressure and installed power required.
MCL centrifugal compressors reach 60 bar and 600,000 m³/h, and the BCL series, with a vertically split casing, goes up to 1,000 bar; for compression of gas in pipelines, the PCL series covers up to 130 bar. The aeroderivative turbines LM6000PF+ (53.8 MW) and LMS100PB+ (110 MW) complete the generation range, and the centrifugal pumps of the BB1-BB5 family cover between 150 and 670 bar, depending on construction. Bently Nevada, the monitoring division, makes 330 series accelerometers and protection systems such as the 3500 for critical rotating machinery.
For the Romanian market, Baker Hughes means access to compression equipment, turbines and monitoring systems used in gas transmission stations, refineries and power plants, where the reliability of rotating machinery is checked by dedicated sensors, not only by scheduled maintenance.
What do we supply from the Baker Hughes range?
| Product | Description |
|---|---|
| Centrifugal and axial compressors | The MCL (horizontally split, up to 60 bar), BCL (vertically split, up to 1,000 bar) and PCL (for gas pipelines, up to 130 bar) families cover different compression applications, depending on the discharge pressure required. The SRL series, with the IGC, TD and LP versions, adds options with integral gears for flow rates from a few thousand up to 360,000 m³/h. The right choice depends on the inlet/outlet pressure and the gas flow rate of the process. |
| Aeroderivative gas turbines | The LM6000PF+ turbine delivers 53.8 MW at 50/60 Hz, and the LMS100PB+ reaches 110 MW, both derived from aircraft engines adapted for power generation or mechanical drive of compressors. The higher-power LM9000 turbine completes the range for industrial-scale generation applications. The industrial series NovaLT12 and NovaLT16 complete the range with new-generation industrial turbines of lower power. |
| Centrifugal process pumps (BB1-BB5) | The BB1 family (axially split casing) covers up to 150 bar and 15,000 kW, the BB2 (radially split) is designed for 1-2 stages at similar pressures, and the BB3 (multistage) goes up to 300 bar. The barrel-type BB5 series reaches 670 bar and is used where the process pressure exceeds what axially split constructions can offer. The choice depends on the discharge pressure and the temperature of the fluid pumped. |
| Bently Nevada monitoring systems | The 330 series accelerometers (including high-temperature versions) measure the vibration of critical rotating machinery, and the 3500 protection systems shut the equipment down automatically when the set vibration thresholds are exceeded. The SCOUT200 portable analyser allows spot diagnostic measurements without installing a permanent system, useful for periodic checks of turbines and compressors in the industrial plant. |
Why Baker Hughes?
- The compressor range covers from 10 bar (SRL-LP) up to 1,000 bar (BCL), for different gas compression applications.
- The LM6000 and LMS100 aeroderivative turbines deliver between 53 and 110 MW, for power generation or compressor drive.
- BB1-BB5 centrifugal pumps cover wide pressure ranges, up to 670 bar on barrel-type construction.
- Bently Nevada 330 series sensors and 3500 systems protect critical rotating machinery against excessive vibration.
- Also present in Europe, including through Baker Hughes operations in Italy.
Which Baker Hughes codes and series are requested most often?
| Code | Description |
|---|---|
| MCL | horizontally split centrifugal compressor, up to 60 bar |
| BCL | vertically split centrifugal compressor, up to 1,000 bar |
| PCL | centrifugal compressor for gas pipelines, up to 130 bar |
| ICL | integrated motor-compressor, up to 300 bar |
| SRL-IGC | compressor with integral gears, up to 200 bar |
| SRL-TD | compressor with transmission, up to 65 bar |
| SRL-LP | low-pressure compressor, up to 10 bar |
| Axial Compressor | axial compressor, flow rate up to 850,000 m³/h |
| LM6000PF+ | aeroderivative gas turbine, 53.8 MW |
| LMS100PB+ | aeroderivative gas turbine, 110 MW |
| LM9000 | high-power aeroderivative gas turbine |
| NovaLT16 | industrial gas turbine |
| NovaLT12 | industrial gas turbine |
| BB1 | centrifugal pump with axially split casing, up to 150 bar |
| BB2 | radially split centrifugal pump, 1-2 stages |
| BB3 | multistage centrifugal pump, up to 300 bar |
| BB5 DDHF | barrel-type centrifugal pump, up to 670 bar |
| Saturne | centrifugal pump from the Baker Hughes portfolio |
| Bently Nevada 3500 | protection system for rotating machinery |
| Bently Nevada SCOUT200 | portable vibration analyser |
Where is Baker Hughes equipment used?
- Oil and gas — compressors and turbines for extraction and transport
- Energy — aeroderivative turbines for generation and cogeneration
- Chemicals and petrochemicals — centrifugal pumps for process fluids
- Industrial maintenance — vibration sensors for protection of rotating machinery
How do we supply Baker Hughes in Romania?
Baker Hughes is headquartered in the United States, in Houston, Texas, and also operates in Europe, including through its subsidiary in Italy. We supply to order components and subassemblies from the compressor, turbine and pump families described above; the lead time is set once the manufacturer's confirmation is received, and for complex equipment configured per project it can take longer, depending on the specification. For a correct quotation, send us the equipment series, the process parameters (flow rate, pressure, temperature) and the intended application. Baker Hughes equipment is configured per project and supplied to order.
Complete configuration of a compressor station and commissioning are handled by the manufacturer or the project integrator; our part is the supply of the equipment.
Frequently asked questions about Baker Hughes
What products does Baker Hughes make?
Baker Hughes makes gas turbines, centrifugal and axial compressors, centrifugal process pumps and vibration monitoring systems for rotating machinery. The company is headquartered in the USA, in Houston, and operates globally, including in Europe.
How do I choose a Baker Hughes compressor by series?
The choice depends on the discharge pressure and the flow rate of the process: MCL for lower pressures, BCL for pressures of up to 1,000 bar. Send us the process parameters and we will tell you which family suits the application.
Do you supply Baker Hughes equipment in Romania, and how long does it take?
We supply Baker Hughes components and subassemblies to order, subject to the manufacturer's confirmation. Large equipment is configured per project; the exact lead time is set based on the technical parameters and, for complex systems, it can take longer, depending on the specification.
Can Baker Hughes be sourced in Romania/Europe?
Yes, Baker Hughes also operates in Europe, including through its subsidiary in Italy; we supply equipment to order, with the manufacturer's confirmation for each project.
What do I need to send for a Baker Hughes quotation?
The equipment series if you know it, otherwise the flow rate, pressure and process temperature plus the intended application (gas compression, fluid pumping, vibration monitoring). With these data we check which family corresponds to your project.
How do I request a Baker Hughes quotation?
Send the Baker Hughes code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: Baker Hughes, Wikipedia (manufacturer documentation)

