Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Bison Gear & Engineering supplier in Romania

For Bison we quote in-line and right-angle gear motors, the 562 and 762 series, the 261 Sanimotor washdown line, IHP-S and SS30, as well as PMDC and VFsync PMAC motors; we need the nameplate, torque, speed and flange.

Headquarters: Kent, USA

Request a quote

Who is Bison Gear & Engineering and what does it make?

Bison Gear & Engineering is an American manufacturer of fractional horsepower motors, gear motors and gear reducers, headquartered in Kent, Ohio, with over 100 years of tradition in motors, blowers and pumps. For the reader in Romania, the line of gear motors and small motors is of interest: drives for conveyor belts, food machinery and light industrial equipment, where a motor of a few hundred watts has to be combined with a compact gear reducer. Only the gear motors and small motors are offered, not the blowers or pumps.

The gear motors are offered in over 700 standard units, in 23 configurations. The in-line parallel-shaft models have over 300 standard units in 14 configurations, with compact versions, IP69K for washdown or for high torque. The right-angle ones use worm or hypoid gearing, while those with offset parallel shafts come in two sizes, the 562 and 762 series, for high torques in a small space. The gear reducers in the range are available in parallel-shaft and right-angle versions.

For washdown environments, the 261 Sanimotor series is an in-line parallel-shaft washdown gear motor (8–350 rpm, 16–500 in-lbs, 1/7 and 1/8 HP, AC motor for inverter), while the IHP-S is a right-angle gear reducer in a stainless steel housing, from 1/4 to 5 HP. On the motor side, the PMDC (permanent magnet direct current) comes in two standard sizes, while the VFsync PMAC offers precise speed control, with a weight 63 % lower and a footprint 56 % smaller than three-phase induction motors of the same power.

What do we supply from the Bison Gear & Engineering range?

ProductDescription
In-line parallel-shaft gear motorsOver 300 standard units in 14 configurations, with compact versions, IP69K for washdown or for high torque. They are used in light and medium industrial machinery, including washdown versions.
Right-angle and offset-shaft gear motorsGear motors with worm or hypoid gearing for 90° mounting, plus the 562 and 762 series with offset parallel shafts, designed for high torques in a small footprint. They are chosen when the space available calls for an output axis perpendicular to the motor.
Washdown lineThe 261 Sanimotor series (in-line gear motor with AC motor for inverter), the IHP-S right-angle gear reducer in a stainless steel housing and the SS30 gear motors. For machines washed with pressurised water.
PMDC and VFsync PMAC motorsPMDC are permanent magnet direct current motors, in two standard sizes. VFsync PMAC are permanent magnet synchronous motors, with precise speed control for automated machines. Both types are intended for compact drives.

Why Bison Gear & Engineering?

  • Over 700 standard gear motors in 23 configurations — better chances of finding a suitable model without a custom design
  • In-line parallel-shaft, right-angle (worm or hypoid) and offset-shaft versions — adapted to the space available in the machine
  • Washdown line (261 Sanimotor, stainless steel IHP-S, SS30) — for the food industry and environments with intensive cleaning
  • PMDC and VFsync PMAC motors — fine speed control, with a motor lighter and smaller than an induction motor of the same power
  • Custom solutions — the company designs versions for applications that standard models do not cover

Which Bison Gear & Engineering codes and series are requested most often?

CodeDescription
261 Series SanimotorIn-line washdown gear motor, 8–350 rpm
IHP-S SeriesRight-angle gear reducer in a stainless steel housing
SS30 SeriesWashdown gear motor
562 SeriesGear motor with offset parallel shafts
762 SeriesGear motor with offset parallel shafts
Inline Parallel Shaft GearmotorsIn-line gear motors, over 300 standard units
Right Angle GearmotorsGear motors with worm or hypoid gearing
Parallel Shaft Gear ReducersParallel-shaft gear reducers
Right Angle Gear ReducersRight-angle gear reducers
PMDC MotorsPermanent magnet direct current motors
VFsync PMAC MotorsPermanent magnet synchronous motors

Where is Bison Gear & Engineering equipment used?

  • Food and beverage industry — washdown gear motors
  • Industrial machinery — drives for belts and medium-capacity machines
  • Energy and environment — drives for process equipment
  • Agriculture and construction — gear motors for mobile machinery
  • Transport equipment and gates — compact drives

How do we supply Bison Gear & Engineering in Romania?

We can quote Bison gear motors, gear reducers and motors from the in-line parallel-shaft, right-angle and washdown lines, including as replacements on machines where they are installed. The equipment is supplied to order, generally in 1–4 weeks; for custom versions the lead time may be longer. For a correct quotation, send us the code on the nameplate, the output speed, the torque required, the power, the supply voltage, the shaft type and the housing shape, as well as the protection rating wanted (for example IP69K). If you are replacing an old gear motor, describe the mounting and the flange measurements, and we check the options.

Direct replacement of another manufacturer's gear motor is established by comparing the torque, the speed and the mounting dimensions.

Frequently asked questions about Bison Gear & Engineering

What does Bison Gear & Engineering make?

It makes fractional horsepower motors, gear motors and gear reducers: in-line parallel-shaft, right-angle and offset-shaft models, a washdown line and PMDC and VFsync PMAC motors. The headquarters is in Kent, Ohio.

How do I choose between an in-line and a right-angle gear motor?

The choice depends on the space available and the orientation of the output shaft: the in-line gear motor keeps the motor axis, while the right-angle one deflects it by 90°. Torque, speed and the working environment also matter. Tell us these data and we identify the suitable series.

Do you supply Bison gear motors in Romania, and in what lead time?

Bison gear motors are supplied to order, usually in 1–4 weeks. A standard model can ship in 24–72 h when the item is in stock, locally or at the supplier. Custom versions or large quantities may have a longer lead time, confirmed in the quotation.

Can I replace an existing gear motor with a Bison one?

We confirm equivalence after checking. Send us the nameplate of the current gear motor (torque, speed, power, voltage), the shaft type, the flange dimensions and the mounting. We compare the data with the Bison models and tell you what fits or what adaptations are needed.

What data should I include in a request for a washdown gear motor?

State the torque and speed required, the power, the supply (AC for inverter or other), the protection rating (IP69K) and the housing material, if it matters for cleaning. Also say whether the gear motor replaces an existing model and what the ambient temperature is.

How do I request a Bison Gear & Engineering quotation?

Send the Bison Gear & Engineering code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Bison (manufacturer documentation)