Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Bulten supplier in Romania

For Bulten we offer screws with a locking patch, sems and TAPTITE thread-forming screws, locking nuts, clinch elements and inserts for plastic; for a quotation we need the part drawing, the strength class, the thread and the coating.

Founded in 1873 · Headquarters: Göteborg, Sweden

Request a quote

Who is Bulten and what does it make?

Bulten is a Swedish manufacturer of fasteners, founded in 1873, based in Göteborg. It makes screws and bolts, nuts, clinch fasteners for sheet metal, inserts for plastics and compression limiters, many of them to the customer's specification, not from a standard catalogue. Steel is supplied in strength classes 8.8, 10.9 and 12.9, and for corrosive environments there are stainless steel versions A2-70 and A2-80. The thread is ISO metric, usually from M4 to M24.

The range stands out for the variety of solutions against loosening under vibration. Friction or microencapsulated locking patches can be applied to the thread; there are all-metal screws, POWERLOK and KLEERLOK, and the locking nuts include versions with a nylon ring and all-metal ones, among them FS, H3C, HCN and Ramtek. Thread-forming screws from the TAPTITE family, up to M20, form their own metric thread in plain holes in ductile metals. The protective coating is chosen between electroplating, zinc flake and phosphating, depending on corrosion and the tightening friction desired.

In industry, Bulten is of interest to machine builders and maintenance teams who have to replace fasteners on imported assemblies, as well as to designers of structures for renewable energy, railways and roads, where screws, nuts, bushings and spacers are used. Because many items are made to drawing, identifying the part starts from the drawing, strength class, thread, head type and coating.

What do we supply from the Bulten range?

ProductDescription
Screws and boltsHexagon head, flanged hexagon, 12-point or Torx, often made to the customer's specification: with a locking patch on the thread, sems with a captive washer, self-aligning, for welding or thread-forming. Usual sizes run from M4 to M24, in classes 8.8, 10.9 and 12.9.
TAPTITE thread-forming screwsA family with a trilobular section, which includes TAPTITE, TAPTITE 2000, DUO-TAPTITE and FASTITE, available up to M20. The screw forms its metric thread in plain holes in ductile metals, and the joint resists vibration well.
NutsHexagon, flanged, with captive washer, locking (with a nylon ring or all-metal, including FS, H3C, HCN and Ramtek), self-clinching, dome, wheel and weld nuts with various types of projections. Besides the standard versions, special nuts are also developed.
Clinch elements, inserts for plastic and compression limitersClinch elements become a permanent part of the sheet metal assembly; Anchor Rivet Bush and FLANGEFORM are two versions. Inserts for plastic are fitted with heat or ultrasound, by moulding or by pressing, and compression limiters protect the plastic from the clamping force.

Why Bulten?

  • Classes 8.8, 10.9 and 12.9, plus stainless steel A2-70 and A2-80 — they cover joints with high mechanical stress and corrosive environments
  • TAPTITE screws up to M20 — they form their own thread in plain holes, so the mating part no longer has to be threaded beforehand
  • POWERLOK and KLEERLOK, all-metal — locking under vibration without a polymer coating, and KLEERLOK cleans paint and weld spatter from the internal thread
  • Anchor Rivet Bush and FLANGEFORM — clinch elements that stay captive in the punched sheet and eliminate loose parts at assembly
  • Protective coating of your choice (electroplating, zinc flake, phosphating) — it controls both corrosion and tightening friction

Which Bulten codes and series are requested most often?

CodeDescription
TAPTITEMetric thread-forming screw, up to M20
TAPTITE 2000Version with Radius Profile thread
DUO-TAPTITEVersion of the TAPTITE thread-forming family
FASTITEThread-forming screw from the same category
POWERLOKAll-metal locking screw, reusable
KLEERLOKLocking screw with notches for cleaning the internal thread
Anchor Rivet BushClinch element of the riveted bush type
FLANGEFORMFlanged clinch element for punched sheet
RamtekLocking nut, patented version
H3CLocking nut, patented version
HCNLocking nut, patented version
REMFORMScrew for plastics
ISO 4014 / ISO 4017References for hexagon head screws
EN 1662 / ISO 4162References for flanged hexagon head screws

Where is Bulten equipment used?

  • Machine and industrial equipment construction — high-strength screws and resistant clinch elements for heavy assemblies
  • Renewable energy — screws, nuts, bushings and spacers for wind farms and solar plants exposed to the weather
  • Railways and roads — fasteners for infrastructure structures
  • Automotive industry — flange screws and locking nuts, with EN 1662 and ISO 4162 references

How do we supply Bulten in Romania?

We can quote Bulten screws, nuts and clinch elements, especially replacement items for existing assemblies. Bulten fasteners are supplied to order, usually in 1–4 weeks; depending on the specification, the lead time may be longer. For a correct quotation send the drawing or sketch of the part, the strength class (8.8, 10.9, 12.9 or stainless steel), the thread and pitch, the head type, the coating and the annual quantity. Items made to drawing are confirmed technically before the quotation.

Parts made specially for other Bulten customers are reproduced only from a drawing, and the minimum order quantity is set once we know the specification.

Frequently asked questions about Bulten

What does Bulten make?

Bulten makes fasteners: screws and bolts, nuts, clinch elements for sheet metal, inserts for plastics and compression limiters. Most items are adapted to the customer's drawing, and some families have their own names, such as TAPTITE, POWERLOK or FLANGEFORM.

How do I choose between a screw with a locking patch and an all-metal one?

The locking patch is a polymer coating applied to the thread and can be adapted to the locking strength, the temperature and the chemical exposure. With POWERLOK and KLEERLOK the effect comes from the metal shape of the screw, with no applied coating. Tell us the working temperature and how many times the joint is taken apart.

Can you bring Bulten elements to Romania and how fast?

Yes, supplied to order. Standard Bulten items are supplied to order, usually in 1–4 weeks. For parts made to drawing or large orders, depending on the specification, the lead time may be longer; we confirm the exact date in the quotation, after the specification.

Can I replace a Bulten screw with another of the same size if I do not have the drawing?

An equivalence is checked on all the data, not on the diameter alone. We need the diameter, pitch, length, strength class, head type and coating, plus the marking on the head or the family name (for example TAPTITE or POWERLOK), so that we can check whether the item can be identified.

What data do I need to send for inserts or compression limiters?

For inserts, the type of plastic and the fitting method matter: with heat or ultrasound after moulding, during moulding, by pressing or self-tapping. Send the desired thread, the wall thickness and the drawing of the plastic part. For compression limiters, also add the tightening force of the screw.

How do I request a Bulten quotation?

Send the Bulten code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Bulten (manufacturer documentation)