Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

CENTA supplier in Romania

For CENTA we quote CENTAFLEX, CENTAMAX and CENTAX flexible couplings, CENTADISC and CENTALINK intermediate shafts and the CENTASTART-V clutch; for a quotation we need the series and size, the torque, the speed and the flange for connection to the engine.

Request a quote

Who is CENTA and what does it make?

CENTA makes torsionally flexible couplings and drive shafts for drives with diesel, electric or hydraulic motors. The range dates from 1970, from a flexible coupling developed for construction machinery and for industry, and has since extended into distinct families: CENTAFLEX, CENTAMAX, CENTAX, CENTADISC, CENTALINK and CENTAJOINT. The couplings with a natural rubber or silicone element damp shocks and torsional vibrations and compensate axial, radial and angular misalignments, without maintenance.

The differences between the families show first in the torque range. CENTAFLEX-H takes 0.1–4 kNm, with a TPE element and an integrated SAE flange for hydraulic pumps mounted on diesel engines; CENTAFLEX-A covers 0.01–12.5 kNm; CENTAMAX-S reaches 24 kNm, with a toothed outer ring and a rubber element; the CENTAX-SEC series goes from 1.1 to 650 kNm, with a closed ring of vulcanised rubber between two steel lenses. For large distances between machines there are intermediate shafts: the composite CENTADISC-C, of up to about 6 m, and CENTALINK, a constant-velocity shaft with rubber elements that insulates electrically and acoustically.

The CENTA range is used on diesel-driven pumping sets and compressors, on generators, on cooling tower fans, on mills, on construction machinery and on rail vehicles. A flexible coupling shifts the natural torsional frequency of the shaft line below the working speed and thus avoids resonance. A replacement coupling is identified by the series, the size, the nominal torque, the type of flexible element and the flange for connection to the engine.

What do we supply from the CENTA range?

ProductDescription
CENTAFLEX-A, -H, -R and -KCouplings for diesel engines and hydraulic pumps: A is flexible, backlash-free, for 0.01–12.5 kNm; H is relatively stiff, with an integrated SAE flange, for 0.1–4 kNm; R, with rubber rollers, goes up to 15 kNm; K is torsionally rigid, for 0.4–5.2 kNm.
CENTAMAX-S and CENTAX-SECHighly torsionally flexible couplings. CENTAMAX-S transmits torque through a toothed ring to a rubber element, up to 24 kNm, and the CENTAX-SEC series (B, G, L, NL) reaches 650 kNm, for diesel sets, power plants and large drives.
CENTADISC-C, CENTADISC-M and CENTA CARBONLightweight intermediate shafts: CENTADISC-C of glass or carbon composite, up to about 6 m, CENTADISC-M of steel or carbon, up to 12 m, for 12.5–650 kNm, and CENTA CARBON, of carbon fibre reinforced plastic, in lengths of up to 10 m per section.
CENTALINK, CENTAJOINT, CENTASTART-V and CENTA CPCENTALINK is a constant-velocity shaft with rubber elements; CENTAJOINT uses spherical rubber bushings (1.1–14 kNm); CENTASTART-V is a centrifugal clutch (0.08–2.5 kNm), and CENTA CP an electromagnetic clutch with a flange bearing (0.7–4.2 kNm).

Why CENTA?

  • Maintenance-free couplings — the rubber elements do not wear by friction, and CENTAFLEX-A gives off no rubber dust in operation
  • Wide torque range — from 0.01 kNm for CENTAFLEX-A up to 650 kNm for CENTAX-SEC, with the same flexible coupling logic
  • SAE flanges for the flywheel — CENTAFLEX-H, CENTAMAX-S and CENTA CP mount directly on the flywheel housing of the diesel engine
  • Composite intermediate shafts — CENTADISC-C reaches about 6 m without intermediate bearings and does not require exact alignment of the ends
  • Flexible elements with hardness and material to choose (natural rubber, silicone, TPE) — the natural torsional frequency of the shaft line is matched

Which CENTA codes and series are requested most often?

CodeDescription
CENTAFLEX-AFlexible coupling, 0.01–12.5 kNm, NR or Si element
CENTAFLEX-BJaw coupling with elastomeric element, 0.032–1.4 kNm
CENTAFLEX-HCoupling with TPE element and SAE flange, 0.1–4 kNm
CENTAFLEX-KTorsionally rigid coupling for hydraulic pumps, 0.4–5.2 kNm
CENTAFLEX-RCoupling with rubber rollers, 0.25–15 kNm
CENTAMAX-SCoupling with toothed ring and rubber element, 0.1–24 kNm
CENTAMAX-GCoupling for generators, 1.2–7 kNm
CENTAX-SECHighly flexible coupling with vulcanised ring, 1.1–650 kNm
CENTAX-VHighly flexible coupling for cardan shafts, 0.23–50 kNm
CENTADISC-CComposite intermediate shaft, 1–50 kNm
CENTADISC-MIntermediate shaft with membrane, 12.5–650 kNm
CENTALINKConstant-velocity shaft with rubber elements
CENTAJOINTJoint with spherical rubber bushings, 1.1–14 kNm
CENTASTART-VCentrifugal clutch based on CENTAFLEX-A, 0.08–2.5 kNm
CENTA CPElectromagnetic clutch with flange bearing, 0.7–4.2 kNm
CENTA CARBONLightweight shaft of carbon fibre reinforced plastic

Where is CENTA equipment used?

  • Diesel-driven pumps and compressors — couplings between the engine and the driven machine, including for fire-fighting pumps
  • Construction machinery — hydrostatic drives with pumps on the engine flywheel housing
  • Generators and power plants — couplings on diesel-generator sets
  • Cooling towers, fans and mills — long intermediate shafts, without intermediate bearings
  • Rail transport — couplings and shafts for driving vehicles

How do we supply CENTA in Romania?

We can quote CENTA flexible couplings from the CENTAFLEX, CENTAMAX, CENTAX and CENTADISC families, as replacement parts or for new drives. CENTA couplings come to order, usually in 1–4 weeks; depending on the specification, the lead time can be longer. For a correct quotation send the series and size from the coupling, the nominal torque and the speed, the type of engine or machine, the SAE flange of the flywheel or the shaft diameters, the working temperature and, for intermediate shafts, the distance between flanges.

The choice of the flexible element for a shaft line depends on the torsional vibration calculation, which requires the inertia data of the engine and of the driven machine.

Frequently asked questions about CENTA

What does CENTA make?

CENTA makes torsionally flexible couplings and drive shafts: the CENTAFLEX, CENTAMAX and CENTAX families for diesel engines, pumps and generators, CENTADISC and CENTALINK intermediate shafts, plus centrifugal or electromagnetic clutches. The range covers torques from 0.01 up to 650 kNm.

How do I choose a CENTAFLEX coupling for a hydraulic pump on a diesel engine?

We start from the SAE flange of the flywheel, from the splined profile of the pump and from the torque required. CENTAFLEX-H is the version with an integrated SAE flange, CENTAFLEX-K is torsionally rigid, and CENTAFLEX-A is flexible and allows larger alignment deviations. Send the SAE size, the splines and the torque.

Do you supply CENTA couplings in Romania, and how fast?

Yes. CENTA couplings and flexible elements come to order, usually in 1–4 weeks. For intermediate shafts made to length and special configurations, depending on the specification, the lead time can be longer; the exact date is confirmed in the quotation, based on the application data.

I have an old CENTA coupling without documentation; can a replacement element be identified?

Often yes, if we have the series of the coupling (for example CENTAFLEX-A or CENTAX-SEC), the size, the hub diameters and the material and hardness of the rubber element. We confirm compatibility from these data, not from dimensions alone; we check the part before the quotation.

What data do I need to send for a CENTADISC or CENTALINK intermediate shaft?

The distance between flanges, the torque and the speed, the alignment deviations expected (axial, radial, angular), the connections at the ends and whether electrical or acoustic insulation is needed. For CENTADISC-C add the total length, since the composite material allows large spans.

How do I request a CENTA quotation?

Send the CENTA code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: CENTA (manufacturer documentation)