ComInTec supplier in Romania
For ComInTec we quote flexible and rigid couplings of the GAS, GEC, GRI and GTR series, DF, DSR and DSS torque limiters, and CFU and GR locking rings and bushes; we need the series, the bore and the working torque.
Headquarters: Villanova di Castenaso, Italy
Who is ComInTec and what does it make?
ComInTec S.r.l. of Villanova di Castenaso, near Bologna, makes couplings, torque limiters and locking elements for mechanical transmissions. The range also includes pneumatic clutches, extension couplings, variable pulleys and motor slide rails.
The couplings are organised in series with letter codes. GAS is the flexible jaw-type coupling with good vibration damping, GEC is the compact flexible coupling that can be serviced without removing it, and GD is the gear coupling with a polyamide sleeve. On the rigid side there are GTR, the disc coupling with no angular play, GRI in steel, GSF with an aluminium bellows and GC with a chain. The coupling range goes up to 130,000 Nm and bores of 220 mm.
The torque limiters protect the transmission against overload and cover up to 120,000 Nm and bores of 260 mm. DF is the friction version, DSR the roller version, DSS/SG the ball version with no backlash, DSM the modular version for heavy industry, PR is fitted between the motor and the gearbox, and DSA limits axial force. Re-engagement is automatic or manual, depending on the series.
The locking elements complete the transmission: CFU and CFB stop rings, to DIN 705, CFBR and CFBR-2 radial clamping rings, RLGS, RTC and RTS washers, and GR and GA locking rings, made of fully machined, dynamically balanced steel. A stainless steel line for couplings and limiters is also available on request.
What do we supply from the ComInTec range?
| Product | Description |
|---|---|
| Flexible and rigid couplings | GAS jaw-type, GEC compact, GD gear, GC chain, GTR disc, GRI rigid steel and GSF with an aluminium bellows. They are chosen according to the transmitted torque, bore, shaft speed and the mounting misalignment between the shafts. |
| Torque limiters | DF friction, EDF/F ball, DSR roller, DSS/SG ball with no backlash, DSM modular, PR for gearboxes and DSA for axial force. The release point is set at the required torque, and re-engagement is manual or automatic, depending on the series. |
| Locking rings and washers | CFU and CFB for stopping on the shaft, to DIN 705, CFBR and CFBR-2 with radial clamping, RLGS, RTC and RTS as washers, GR and GA as radial or axial locking rings. They are ordered according to the shaft diameter and the clamping type. |
| Pneumatic clutches and extension couplings | Pneumatic clutches for controlled engagement and disengagement of the transmission, and extension couplings that reach lengths of several metres. They are chosen according to the working torque, bore and the distance between the shaft ends. |
Why ComInTec?
- Flexible, rigid, gear, bellows and chain couplings in a single range — the type is chosen according to the permitted play and the shaft misalignment
- DF, DSR, DSS and DSM torque limiters — overload protection suited to everything from simple drives to heavy-industry transmissions
- PR series between the motor and the gearbox — for the same transmitted power, the protection device takes up noticeably less space
- CFU, CFB, CFBR and GR/GA locking rings — positioning on the shaft is radial or axial, according to the mounting requirements
- Couplings up to 130,000 Nm and limiters up to 120,000 Nm — the same family covers everything from small drives to powerful transmissions
Which ComInTec codes and series are requested most often?
| Code | Description |
|---|---|
| GAS | Flexible jaw-type coupling |
| GEC | Compact flexible coupling |
| GD | Gear coupling, polyamide sleeve |
| GC | Single chain coupling |
| GTR | Torsionally rigid disc coupling |
| GSF | Coupling with aluminium bellows |
| DF | Friction torque limiter |
| DSR | Roller torque limiter |
| DSS/SG | Ball torque limiter, no backlash |
| DSM | Modular torque limiter |
| PR | Torque limiter for gearboxes |
| CFU / CFB | Stop rings to DIN 705 |
| GR / GA | Radial and axial locking rings |
Where is ComInTec equipment used?
- Industrial drives — flexible couplings between the motor and the driven machine
- Gearboxes and transmissions — PR torque limiters between the motor and the gearbox
- Conveyor lines and packaging machines — overload protection with DF, DSR or DSS
- Heavy industry — DSM modular limiters and couplings for high torques
- Installations with difficult media — the stainless steel line for couplings and limiters
How do we supply ComInTec in Romania?
We can quote couplings, torque limiters and locking rings from the ComInTec series you have identified on a machine or in a project. For a correct quotation we need the series or the code on the coupling, the bores at both ends, the rated torque and the speed. For a limiter, the required release torque and the type of re-engagement help. Items are supplied to order, generally within 1–4 weeks; special sizes or stainless steel versions may take longer.
The exact series and size of the coupling or limiter are confirmed in the quotation, based on the torque, speed and bores you send.
Frequently asked questions about ComInTec
What are the DF, DSR, DSS/SG, DSM and PR torque limiters from ComInTec?
DF is a friction torque limiter, DSR is a roller type, DSS/SG is a ball type with no backlash, DSM is modular, and PR is for gearboxes.
How do I choose between the GAS and GEC couplings?
GAS is the jaw-type coupling, with good vibration damping and several clamping types, while GEC is the compact, protected version that is serviced without removing the coupling. Send the torque, speed and bores, and we confirm the size.
Do you supply ComInTec products in Romania, and how quickly?
Yes, products are supplied to order, usually in 1–4 weeks. An item can ship in 24–72 h when the item is in stock, locally or at the supplier. Large sizes or special versions may have a longer lead time, which we give in the quotation.
Which torque limiter replaces an old one on a machine?
A limiter from the DF, DSR, DSS or PR series, chosen according to the marking on the limiter, the bore, the release torque and the way it is mounted, for example between the motor and the gearbox. Send us these details and we check which series fits.
What details do I send for a quotation on couplings or locking rings?
For couplings, send the torque, speed, bores and the type of misalignment. For rings and washers, send the shaft diameter, the clamping type, radial or axial, and the material required, steel or stainless steel. A photo of the old part helps with identification.
How do I request a ComInTec quotation?
Send the ComInTec code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: ComInTec S.r.l. (manufacturer documentation)

