Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Danly supplier in Romania

For Danly we quote die sets C1–C9 and A1–A9, SinterLube bushings, SuperSprings springs, DESIGN2-TITE nitrogen springs and Camdrive cams; we need the code from the bill of materials, the diameter, the stroke and the force.

Headquarters: Herstal, Belgium

Request a quote

Who is Danly and what does it make?

Danly, through the European company DANLY EUROP S.A. in Herstal, Belgium, makes components for sheet metal stamping dies: die sets, guiding elements, helical compression springs, gas springs, cam units, punches and die plates. DANLY EUROP holds quality-system certifications according to the manufacturer's documentation and supplies tool shops and press shops in the automotive and metalworking industries. For a quotation, send us the Danly code from the component or from the bill of materials of the die, with the main dimensions.

Standard die sets are rectangular, in the C1–C9 series to ISO and in the CC, DC and RC series, while sets with customisable pillars form the A1–A9 series. All are fitted with steel, sintered bronze or SinterLube bushings, with plain or ball guiding, and can receive special machining. The pillars and bushings have a surface hardness of 60–64 HRC and a roughness of 0.2 µm, and the pillars, bushings and ball cages are interchangeable at the same nominal diameter. SinterLube bushings, also offered in a DIN 9834 version, need only initial lubrication; for a high number of strokes there are ball guides.

SuperSprings helical springs number over 400 sizes, in four colour-coded load classes, with lengths, diameters and stiffnesses to ISO 10243, and polyurethane springs are supplied in 80, 90 and 95 Shore hardness. DESIGN2-TITE nitrogen springs exceed the requirements of ISO 11901-1 and VDI 3003, have a SinterLube guide bushing and a one-piece piston rod, with forces between 90 daN and 6,600 daN. Hydrocam cam units cover lateral forces of 20–310 kN, and Camdrive mechanical cams, of 10–180 kN, allow inclined mounting up to 30°. Punches and die plates are made to DIN and ISO, from HSS, carbide or powder-metallurgy steels, with vacuum heat treatment and cooling to −150 °C.

What do we supply from the Danly range?

ProductDescription
Die sets C1–C9, CC, DC, RC and A1–A9Standard rectangular sets to ISO (C1–C9), the CC, DC and RC series and sets with customisable pillars A1–A9, with steel, sintered bronze or SinterLube bushings and plain or ball guiding. They are supplied with 3D CAD data and, on request, with special machining.
Guiding elements and SinterLube bushingsPillars, bushings and ball cages with a hardness of 60–64 HRC and a roughness of 0.2 µm, interchangeable at the same diameter. Sintered bronze and SinterLube bushings receive the coating through a powder-metallurgy process; SinterLube needs only initial lubrication and is also available in a DIN 9834 version.
SuperSprings springs and DESIGN2-TITE nitrogen springsOver 400 helical compression springs in four colour-coded load classes, to ISO 10243, polyurethane springs of 80, 90 and 95 Shore and DESIGN2-TITE nitrogen springs of 90–6,600 daN, filled to the pressure required by the application.
Hydrocam and Camdrive cam unitsHydrocam transmits lateral movements in any direction in the die, with forces of 20–310 kN. Camdrive is a compact mechanical cam, with graphite bushings, forced return and a SuperSprings spring, for cutting forces of 10–180 kN and inclined mounting up to 30°.

Why Danly?

  • Pillars and bushings at 60–64 HRC, roughness 0.2 µm — precise die guiding over a long service life
  • Guiding components interchangeable at the same nominal diameter — replace the bushing without replacing the set
  • SinterLube bushings, also in DIN 9834 version — need only initial lubrication
  • SuperSprings to ISO 10243, colour-coded — quick replacement during die maintenance
  • DESIGN2-TITE nitrogen springs of 90–6,600 daN — above the requirements of ISO 11901-1 and VDI 3003

Which Danly codes and series are requested most often?

CodeDescription
C1–C9Standard rectangular die sets to ISO
CC / DC / RCStandard die set series
A1–A9Die sets with pillars, customisable
SinterLubeGuide bushing with initial lubrication only, also in DIN 9834 version
SuperSpringsHelical compression springs, ISO 10243, four load classes
DESIGN2-TITENitrogen spring, 90–6,600 daN
HydrocamCam unit for lateral movements, 20–310 kN
CamdriveMechanical cam, 10–180 kN, inclination up to 30°
Punches and die plates DIN/ISOPunches and die plates in HSS, carbide or powder-metallurgy steels

Where is Danly equipment used?

  • Automotive industry — progressive and transfer dies with Danly sets, nitrogen springs and Camdrive cams
  • Sheet metal stamping — C1–C9 die sets and ball guiding elements for a high number of strokes
  • Tool shops and die workshops — DIN/ISO punches and die plates, SuperSprings springs
  • Metalworking by pressing — Hydrocam units for lateral operations in the die

How do we supply Danly in Romania?

We can quote Danly components for dies: die sets, pillars, steel, sintered bronze or SinterLube bushings, ball cages and ball guides, SuperSprings and polyurethane springs, DESIGN2-TITE nitrogen springs, Hydrocam and Camdrive cams, punches and die plates. For an accurate quotation, send us the Danly code from the bill of materials of the die or from the component, the nominal diameter and the length for guides, the load class or colour of the spring, and the stroke and force for gas springs. We supply the items to order, usually in 1–4 weeks; a component can ship in 24–72 h when the item is in stock, locally or at the supplier.

We quote Danly components by the code and dimensions in the die design, and the adjustment and fitting in the die are carried out by your toolroom.

Frequently asked questions about Danly

What does Danly make?

Danly makes components for stamping dies: standard and customised die sets, guide pillars and bushings, including SinterLube, ball guides, SuperSprings helical springs, polyurethane springs, DESIGN2-TITE nitrogen springs, Hydrocam and Camdrive cams, punches and die plates to DIN and ISO. If the die comes from North America, mention this: there the Danly brand has a separate catalogue.

How do I choose a replacement SuperSprings spring?

SuperSprings springs comply with ISO 10243 and are divided into four colour-coded load classes, with uniform lengths and diameters across the classes. For a replacement, send us the colour, the outside diameter and the free length, or the code from the bill of materials of the die, and we choose the spring with the same stiffness.

How long does it take you to supply Danly components?

For Danly, we supply them to order, usually in 1–4 weeks. A standard bushing, spring or punch can ship in 24–72 h when the item is in stock, locally or at the supplier. For die sets with special machining, depending on the specification, the lead time may be longer.

Can I replace a bronze bushing with a SinterLube one?

Danly pillars, bushings and cages are interchangeable at the same nominal diameter, and the bushings are made in steel, sintered bronze or SinterLube. To confirm the replacement, send us the diameter, the length, the type of guiding (plain or ball) and the working conditions of the die.

What do I need to send for a quotation on Danly nitrogen springs?

The spring code from the body, if there is one, the initial force, the stroke, the mounting dimensions (diameter and height), the fixing method and the filling pressure wanted. DESIGN2-TITE springs cover 90–6,600 daN and can be filled to the application's requirements, so the actual force in the die matters.

How do I request a Danly quotation?

Send the Danly code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: DANLY EUROP S.A. (manufacturer documentation)