Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

DURBAL supplier in Romania

For DURBAL we quote rod ends from the Classic and Basic lines, in the K and E series, hydraulic rod ends and K, E, G and C spherical plain bearings; we need the size, the series, the thread and the maintenance or maintenance-free version.

Headquarters: Öhringen, Germany

Request a quote

Who is DURBAL and what does it make?

DURBAL makes rod ends, spherical plain bearings and tie-rod joints at Öhringen, in Germany. Current production has about 2,200 standard items, plus versions on request. The parts take up tilting, inclining and rotating movements in hydraulic and pneumatic cylinders, in levers and in actuating mechanisms.

Plain rod ends are made in two lines. The Classic line, for heavy loads, has a forged and hardened housing, a hard-chromed or stainless steel ball and a DURBAL-Glide sliding layer, made of glass-fibre-reinforced plastic containing PTFE, in the K and E/EH series and in an inch version. The Basic line, standard, has a heat-treated steel housing, with a pressed-in spherical bearing, lined with bronze-PTFE composite or bonded with PTFE fabric, in the K and E series. In the maintenance version, the K series suits axial loads and the E series large alternating loads. The rod ends comply with DIN ISO 12240-4, and for coupling with pneumatic cylinders with DIN ISO 8139.

Spherical plain bearings are made in the K, E and G series in the Classic line and K, E, G and C in the Basic line, according to DIN ISO 12240-1, -2 and -3. The range also includes hydraulic rod ends, joints with rollers or balls and tie rods. The factory's quality system has management certifications stated in the manufacturer's documentation.

What do we supply from the DURBAL range?

ProductDescription
Rod ends, Classic lineRod ends for heavy loads, with a forged and hardened housing, in the K and E/EH series and in inch. The ball is hard-chromed or stainless steel; the DURBAL-Glide sliding layer makes the joint maintenance-free. Versions in stainless steel and aluminium are also available.
Rod ends, Basic lineStandard rod ends, with a heat-treated steel housing and a pressed-in spherical bearing, in the K and E series. The lining is bronze-PTFE composite or bonded PTFE fabric. In the maintenance version, the K series takes axial loads and the E series large alternating loads.
Spherical plain bearingsSpherical bearings in the K, E and G series (Classic) and K, E, G and C (Basic), according to DIN ISO 12240-1, -2 and -3. In the Classic line the outer ring has an injected DURBAL-Glide sliding layer and a hard-chromed or stainless steel ball; in the Basic line the ring is lined with bronze-PTFE composite or with bonded PTFE fabric. They are chosen by bore diameter and series.
Hydraulic rod ends and rod jointsHydraulic rod ends for cylinders, rod ends with rollers or balls and tie rods. They are used in kinematics with tilting movement and in rod connections; the choice is made by thread, load and maintenance or maintenance-free version.

Why DURBAL?

  • Plain rod ends in the Classic line, for heavy loads, and the Basic line, for standard use — chosen by load and working environment
  • DURBAL-Glide sliding layer, made of glass-fibre-reinforced plastic, in the Classic line — for maintenance-free joints
  • Versions with and without maintenance in both lines — the choice depends on access for lubrication in the machine
  • Rod ends complying with DIN ISO 12240-4 and DIN ISO 8139 — they fit standard pneumatic cylinders
  • Versions in stainless steel and aluminium, plus parts on request — useful in corrosive environments or when the standard size does not fit

Which DURBAL codes and series are requested most often?

CodeDescription
Classic KRod end, Classic line, K series
Classic E/EHRod end, Classic line, E and EH series, heavy loads
Classic inchRod end, Classic line, inch version
Basic KStandard rod end, Basic line, K series
Basic EStandard rod end, Basic line, E series
Spherical bearing KSpherical plain bearing, K series, DIN ISO 12240
Spherical bearing ESpherical plain bearing, E series, DIN ISO 12240
Spherical bearing GSpherical plain bearing, G series, DIN ISO 12240
Spherical bearing CSpherical plain bearing, C series, Basic line
DIN ISO 12240-4Standard for rod ends of both lines
DIN ISO 8139Standard for rod ends that couple with pneumatic cylinders

Where is DURBAL equipment used?

  • Hydraulics and pneumatics — rod ends on cylinders, according to DIN ISO 8139
  • Machines and equipment — levers and joints with tilting movements
  • Machine building — spherical plain bearings in kinematics
  • Rod connections — joints and tie rods for kinematics

How do we supply DURBAL in Romania?

We can quote DURBAL rod ends from the Classic and Basic lines, hydraulic rod ends, spherical plain bearings and rod joints. For a correct quotation send the series or code from the part, the bore diameter, the thread and its direction, the maintenance or maintenance-free version, the material wanted and, for a replacement, a photo with the measured dimensions. The parts are supplied to order, usually in 1–4 weeks; depending on the specification, the lead time can be longer and is confirmed in the quotation.

For parts on request and for special versions, the mounting data are confirmed in the quotation, from the drawing or the worn part.

Frequently asked questions about DURBAL

How are DURBAL rod ends and spherical bearings divided between the Classic and Basic lines?

The company from Öhringen makes rod ends, spherical plain bearings, hydraulic rod ends and tie rods, in the Classic and Basic lines. The standard programme has about 2,200 items, and parts on request complete the range.

How do I choose between the K series and the E series for a rod end?

For maintenance rod ends in the Basic line, the K series suits axial loads and the E series large alternating loads. In the Classic line the choice is also made by size and version. Send the load, the type of movement and the bore diameter to confirm the series.

Do you supply DURBAL in Romania, and how quickly?

Yes. Rod ends can ship in 24–72 h when the item is in stock, locally or at the supplier, and those supplied to order usually arrive in 1–4 weeks. For special versions or large quantities the lead time can be longer; we confirm it in the quotation.

Can I replace an existing rod end with a DURBAL one?

Yes, if you send us the code from the part or its dimensions: bore diameter, thread, width and length. DURBAL rod ends comply with DIN ISO 12240-4, and those for pneumatic cylinders with DIN ISO 8139; we check the fit before ordering.

What do I send for a spherical plain bearing quotation?

The series wanted (K, E, G or C), the bore diameter, the outer dimensions, the ball material and whether a maintenance-free version is required. DURBAL spherical bearings comply with DIN ISO 12240-1, -2 and -3 depending on the line.

How do I request a DURBAL quotation?

Send the DURBAL code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: DURBAL (manufacturer documentation)