EFFBE supplier in Romania
For EFFBE we quote elastomer diaphragms that are flat, corrugated, rolling, U-shaped and dish-type, diaphragms with insert, Reciflex rubberised-fabric diaphragms and subassemblies; we need the dimensions, the material and the working pressure.
Headquarters: Habsheim, France
Who is EFFBE and what does it make?
EFFBE is a company based in Habsheim, in Alsace, France, specialised in elastomer diaphragms. Production, expertise and development for rubber diaphragms are located at Habsheim. The range covers flat, U-shaped, corrugated, insert, dish-type and rolling diaphragms, technical elastomer parts and preassembled subassemblies.
The base materials are EPDM, silicone, FKM (Viton), FVMQ, nitrile, ECO, fluorosilicones, HNBR, chloroprene, butyl, AEM and low-permeability PVC-nitrile, with hardness between 20 and 80 Sh A. Textile reinforcement is made with polyester, polyamide, aramid, cellulose or cotton, and inserts can be made of PA6.6 (including with 30% glass fibre), metal, plastic, film, cardboard or paper. The bond between the insert and the elastomer determines the service life of the assembly. For flat diaphragms, the stroke is limited to 6% of the inner diameter for control and to 10% for other applications.
Reciflex diaphragms are moulded diaphragms made of fabric rubberised on both faces, with thicknesses between 0.15 and 3 mm, with NBR, ECO, FVMQ, FMQ or FKM elastomers and with several fabric layers for higher pressures. Applications include industrial control, check valves, hydraulic accumulators, volume compensators, diaphragm dampers, compressors (including for hydrogen), metering, urea and vacuum pumps, solenoid valves and refrigeration valves. For a quotation, what matters is the drawing or dimensions, the elastomer, the hardness, the pressure and the temperature.
What do we supply from the EFFBE range?
| Product | Description |
|---|---|
| Flat and U-shaped diaphragms | Flat and U-shaped elastomer diaphragms, with or without textile reinforcement. For flat diaphragms, the stroke can reach 6% of the inner diameter for control and 10% for other applications. |
| Corrugated and rolling diaphragms | Corrugated and rolling diaphragms for long-stroke actuators: pneumatic cylinders, dampers, accumulators and compensators. |
| Reciflex diaphragms | Moulded diaphragms made of fabric rubberised on both faces, with thickness between 0.15 and 3 mm. NBR, ECO, FVMQ, FMQ or FKM elastomers; several fabric layers for higher pressures; additional treatments on request. |
| Technical parts and subassemblies | Technical elastomer parts, for example hydraulic cylinders, compensators and cushions, as well as preassembled subassemblies with diaphragm and insert, for valves, pumps and regulators. |
Why EFFBE?
- Elastomers from EPDM to FKM and HNBR — the material is chosen according to the fluid and the temperature in the application
- Hardness between 20 and 80 Sh A — stiffness is adapted to the function of the diaphragm
- Reciflex rubberised-fabric diaphragms, from 0.15 mm thickness — for many cycles and low stiffness
- Inserts made of metal, PA6.6 or plastic — giving ready-to-fit diaphragm-and-part assemblies
- WRAS, FDA, UBA, W270, NSF61 and ACS standards — for applications in the water sector
Which EFFBE codes and series are requested most often?
| Code | Description |
|---|---|
| Reciflex | Rubberised-fabric diaphragm, 0.15–3 mm thickness |
| EPDM | Elastomer for diaphragms, hardness 20–80 Sh A |
| FKM | Fluoroelastomer for diaphragms |
| HNBR | Elastomer for diaphragms |
| FVMQ | Fluorosilicone elastomer for diaphragms |
| NBR | Nitrile elastomer, also used in Reciflex diaphragms |
| PA6.6 | Insert material, including with 30% glass fibre |
| WRAS | Drinking-water standard, listed among those met |
Where is EFFBE equipment used?
- Industrial control — diaphragms for regulators and check valves
- Gas measurement and control — diaphragms for regulators and meters
- Metering, urea and vacuum pumps — diaphragms for the pump chamber
- Compressors, including for hydrogen — diaphragms for gas compression
- Wastewater treatment and renewable energy — diaphragms for valves and fuel cells
How do we supply EFFBE in Romania?
We can quote EFFBE elastomer diaphragms that are flat, corrugated, rolling, U-shaped and dish-type, Reciflex diaphragms and subassemblies, including items for existing equipment. For a correct quotation, send the drawing or the dimensions (diameters, thickness, stroke), the elastomer and the hardness, the type of insert, the fluid, and the working pressure and temperature. Standard diaphragms and those made to a drawing are supplied to order, usually in 1–4 weeks; depending on the specification, the lead time may be longer, and the quotation contains the exact date.
For diaphragms made to a drawing, we check the material and the feasibility on the basis of the drawing and the working fluid before the quotation.
Frequently asked questions about EFFBE
What diaphragm families and subassemblies does the EFFBE range cover, including Reciflex?
EFFBE makes elastomer diaphragms at Habsheim, in France: flat, U-shaped, corrugated, insert, dish-type and rolling diaphragms, plus Reciflex diaphragms, technical elastomer parts and preassembled subassemblies for regulators, valves and pumps.
How do I choose the elastomer for a diaphragm?
The elastomer is chosen according to the fluid in contact, the temperature, the cycle frequency and the pressure. The range includes EPDM, silicone, FKM, FVMQ, nitrile, ECO and HNBR, with hardness between 20 and 80 Sh A. Send the fluid and the working conditions, and we check the suitable material.
Do you supply EFFBE diaphragms in Romania, and how quickly?
Yes. EFFBE diaphragms are supplied to order, usually in 1–4 weeks. For diaphragms made to a drawing or for subassemblies, the lead time may be longer, depending on the specification; the exact date appears in the quotation.
Can I replace a damaged diaphragm in a regulator?
Yes, if the dimensions, shape, material and type of insert match. Equivalence is established after checking: send the old diaphragm or its drawing, with the diameter, thickness, stroke and fluid, and we check whether a compatible EFFBE item exists.
What do I need to specify for an EPDM, FKM or HNBR diaphragm?
EPDM, FKM and HNBR are elastomers for diaphragms, and FKM is the fluoroelastomer. Send the drawing or the dimensions (diameters, thickness, stroke), the required material and hardness, the type of insert, the fluid, the pressure, the temperature and the estimated annual quantity. Also state whether the application has drinking-water or food-contact requirements.
How do I request a EFFBE quotation?
Send the EFFBE code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: EFFBE (manufacturer documentation)

