Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

CDM Stravitec supplier in Romania

Vibro-acoustic isolation of equipment: spring, elastomer and air mounts

Founded in 1951 · Headquarters: Overijse, Belgium

Request a quote

Who is CDM Stravitec and what does it make?

CDM Stravitec is a company based in Overijse, Belgium, founded in 1951, which specialised in noise and vibration isolation for buildings and industrial equipment. In 1964 it carried out a first base isolation project for a building, and in the 1990s it introduced rubber composites and, later, polyurethane foam and recycled rubbers. The company has offices in several European countries, Canada and the USA.

For industry the Stravimech line is of particular interest, intended for process equipment and building services. It includes mounts with one, two or four springs (Bearing-S1, S2, S4 and S4S, the last with lateral stiffening), Bearing-P elastomeric mounts, Bearing-Air air cushions, the ElevatorFix system for elevator guide rails and Fix elastic structural fixings. They are used for transformers, generators, air handling units, pumping sets, extraction fans, heat pumps, chillers, cooling towers and compressors, but also for machines such as looms, metal presses and printing machines.

A brand like this usually appears on projects for the vibro-acoustic isolation of technical rooms or of heavy equipment installed on upper floors, where the isolation requirement is set by the design. The choice of type (spring, elastomer, air, inertia base) depends on the mass of the machine, the disturbing frequency and the stiffness of the floor slab.

What do we supply from the CDM Stravitec range?

ProductDescription
Stravimech Bearing-S1 / S2 / S4 / S4SIsolation mounts with one, two or four springs for machines and technical equipment; the S4S variant adds lateral stiffening for stability under horizontal loads.
Stravimech Bearing-PElastomeric mounts for mechanical equipment, suitable where springs are not needed and the elastomer's own damping is sufficient.
Stravimech Bearing-AirPneumatic mounts (air cushions) for mechanical equipment, the third isolation variant in the family, alongside spring and elastomer.
Stravimech ElevatorFix and FixElevatorFix is a system designed specifically for isolating elevator guide rails; Fix is an elastic structural fixing system for machines.

Why CDM Stravitec?

  • Mounts with 1, 2 or 4 springs in the same Stravimech family — the load is covered by the number of springs, not by a single oversized type
  • Bearing-Air air version — an alternative to spring and elastomer in the same family, for equipment where those two solutions do not fit
  • ElevatorFix — a system engineered to order for isolating elevator guide rails, a frequent point of structure-borne noise transmission
  • Inertia base (steel frame or concrete block) included in the manufacturer's approach — the added mass reduces the amplitude and rocking of the machine
  • Experience in base isolation of buildings since 1964 — useful on projects where the machine is installed close to noise-sensitive spaces

Which CDM Stravitec codes and series are requested most often?

CodeDescription
Stravimech Bearing-S1Single-spring isolation mount for machines
Stravimech Bearing-S2Two-spring isolation mount for machines
Stravimech Bearing-S4Four-spring isolation mount for machines
Stravimech Bearing-S4SFour-spring mount with lateral stiffening
Stravimech Bearing-PElastomeric mount for mechanical equipment
Stravimech Bearing-AirPneumatic mount for mechanical equipment
Stravimech ElevatorFixGuide rail isolation system for elevators
Stravimech FixElastic structural fixing for machines
StravibaseLine for base isolation of buildings and structural fixings
StravifloorHigh-performance floating floor line
StravilinkElastic decoupling for walls and ceilings
StraviwoodAcoustic connectors for solid timber structural elements

Where is CDM Stravitec equipment used?

  • Building services — chillers, heat pumps, air handling units, cooling towers
  • Building-level energy — transformers, generators, cogeneration plants
  • Light and heavy industry — looms, metal presses, printing machines
  • Vertical transport — elevators and vibro-acoustically isolated guide rails
  • Construction with high acoustic requirements — performance halls, music spaces, offices

How do we supply CDM Stravitec in Romania?

We can take requests for Stravimech spring, elastomer or air mounts if the project already has sizing data or if you can provide it. We supply to order, usually in 1–4 weeks; for systems sized per project, such as ElevatorFix, the lead time can be longer. For a correct quotation we need the mass of the equipment and its distribution over the support points, the speed or disturbing frequency, the type of floor slab, any deflection limits and whether an inertia base is present. If calculations are missing, we tell you what information is needed for a recommendation; the type is selected once these data are available.

Sizing is based only on the technical data of the project.

Frequently asked questions about CDM Stravitec

What does CDM Stravitec make?

The Belgian company, founded in 1951, makes vibration and noise isolation systems for buildings and equipment: spring mounts, elastomers, air cushions, floating floors and wall decoupling. The Stravimech line covers technical equipment and industrial machines.

How do I choose between a spring, elastomer or air cushion mount?

The Stravimech family has three principles: spring, elastomer and air. The choice depends on the mass of the equipment, the speed and the stiffness of the floor slab, and the final type is confirmed from the data you send.

Can you supply CDM Stravitec solutions in Romania, and in what time?

We can supply Stravimech solutions to order, usually in 1–4 weeks. Systems sized per project, such as ElevatorFix, or large batches for a site may have a longer lead time, confirmed in the quotation.

Can I replace the mounts of an existing machine with the Stravimech range?

Only after checking the load per point, the deflection required and the way of fixing. Equivalence is confirmed from checked data, not from appearance; send the code of the old mount, the mass of the equipment and photos of the installation, and we check the suitable variant.

What should I send for a quotation on isolating a piece of equipment?

The type and mass of the equipment, the number of support points, the speed or disturbing frequency, the type of floor slab, the space available for the mount and whether an inertia base is present. For elevators, add the type of guide rails, to check which ElevatorFix system fits.

How do I request a CDM Stravitec quotation?

Send the CDM Stravitec code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 22 November 2026 · Sources: CDM Stravitec (manufacturer documentation)