DIETZ-motoren supplier in Romania
For DIETZ-motoren we quote air-cooled or liquid-cooled electric motors, SB80, SB100 and SB120 blowers, HR high-pressure, GR/GT medium-pressure and DN low-pressure radial fans; we need the power, the voltage, the speed and the flow rate.
Headquarters: Dettingen unter Teck, Germany
Who is DIETZ-motoren and what does it make?
DIETZ-motoren, from Dettingen unter Teck, develops and produces custom electric motors, radial fans and blowers. The two families complement each other: the motors are supplied as a drive solution, and the radial fans have motors in the IE3 and IE4 efficiency classes.
The electric motors are built on the modular principle, with power up to 200 kW and the possibility of adapting to customer requirements. There are two cooling methods: air-cooled motors, with a ribbed housing that increases the heat exchange surface, and liquid-cooled motors, with a smooth stator housing and a separate cooling jacket, which allows the cooling to be integrated into the customer's process. The components are dimensioned for operation with a variable frequency drive, and the stator has insulation resistant to this operating mode. Shafts are made tapered, splined, keyed or plain, and connection is made through a terminal box or through industrial connectors.
The fans are divided by pressure. The SB blower is a compact high-performance unit, in sizes SB80, SB100 and SB120, with a high-speed permanent magnet synchronous motor, an aluminium housing and a one-piece impeller. The HR high-pressure radial fans also come in the HR-INV version with a built-in frequency drive. The GR and GT are medium-pressure, and the GR conveys air with particles. The DN series, low-pressure, has a steel impeller and works on both suction and discharge.
When ordering, the motor data or the fan series matter, plus the installation conditions.
What do we supply from the DIETZ-motoren range?
| Product | Description |
|---|---|
| Air-cooled motors | Motors with a ribbed housing designed for a large cooling surface, cast iron end shields, drive-resistant insulation and IE3 and IE4 efficiency classes when operated directly from the mains. They can have stoppage monitoring and adapted shafts. |
| Liquid-cooled motors | Motors with a smooth stator housing and a separate cooling jacket, which integrates into the customer's process. Power goes up to 200 kW, and connection is made through a terminal box or through Harting Han industrial connectors. |
| SB blowers and HR fans | The SB blower in sizes SB80, SB100 and SB120 has a large air volume and high pressure in a compact form, with a permanent magnet synchronous motor. The HR series is radial, high-pressure, with the HR-INV version with a built-in drive. |
| GR, GT and DN radial fans | The GR and GT are medium-pressure radial fans, with a closed impeller and an aluminium housing, the GR being suitable for air with particles. The DN is a low-pressure radial fan, with a steel impeller, for suction and discharge, with accessories for connecting ducts. |
Why DIETZ-motoren?
- Modular motors up to 200 kW — the design is adapted without starting from a new project
- Air or liquid cooling — liquid-cooled motors integrate into the process cooling circuit
- Components dimensioned for a variable frequency drive — the stator insulation is made for this operating mode
- Fans on three pressure levels (HR, GR/GT, DN) — the choice is made by the pressure required
- HR-INV with built-in frequency drive — flow is adjusted without a separate device
Which DIETZ-motoren codes and series are requested most often?
| Code | Description |
|---|---|
| SB80 | High-performance blower |
| SB100 | High-performance blower |
| SB120 | High-performance blower |
| SB140-45 | High-performance blower from the SB series |
| HR | High-pressure radial fan |
| HR-INV | HR fan with built-in frequency drive |
| GR | Medium-pressure radial fan, for air with particles |
| GT | Medium-pressure radial fan |
| DN | Low-pressure radial fan, with steel impeller |
| IE3 / IE4 | Motor efficiency classes when operated from the mains |
Where is DIETZ-motoren equipment used?
- Custom drives — air-cooled or liquid-cooled motors, adapted to the load and the operating regime
- Installations with existing liquid cooling — motors with a separate cooling jacket
- Industrial ventilation — low-, medium- or high-pressure radial fans
- Extraction and conveying of air with particles — GR radial fans
- Processes with adjustable flow — HR-INV fans with built-in frequency drive
How do we supply DIETZ-motoren in Romania?
We can quote DIETZ-motoren motors, SB blowers and radial fans from the HR, GR, GT and DN series, to your specification. For motors we need the power, voltage, frequency, rated speed, cooling type, mounting form and number of pieces, and for a replacement motor also the series from the nameplate. For fans we need the flow rate, the pressure and the medium handled. We supply to order, usually in 1–4 weeks; for custom motors the lead time may be longer, and the exact date appears in the quotation.
For a custom motor, the version is confirmed in the quotation, once we have checked the power, speed and operating regime you provide.
Frequently asked questions about DIETZ-motoren
What are the HR, GR, GT and DN series from DIETZ-motoren?
They are radial fans grouped by pressure: the HR is high-pressure (there is also the HR-INV, with a built-in frequency drive), the GR and GT are medium-pressure, and the DN is low-pressure, with a steel impeller. The GR is designed for air with particles.
How do I choose between an air-cooled and a liquid-cooled motor?
The air-cooled motor has a ribbed housing for heat exchange over a large surface, while the liquid-cooled one has a smooth stator and a separate cooling jacket, which can be integrated into your process. Send the power, the speed, the ambient temperature and whether you have a liquid cooling circuit.
Do you supply DIETZ-motoren products in Romania and how fast?
DIETZ-motoren motors and fans are supplied to order. The order is placed with the supplier and usually arrives in 1–4 weeks; an item can ship in 24–72 h when the item is in stock, locally or at the supplier. For custom motors the lead time may be longer, and the quotation fixes the date.
Can I replace an existing motor with a DIETZ-motoren one?
Yes, if the power, voltage, frequency, speed, mounting form and shaft end match. For a replacement motor send the nameplate and, if there is one, the serial number, and after checking we establish whether a DIETZ-motoren design can take its place.
What do I send for a quotation on an HR, GR or DN fan?
Send the series wanted, the flow rate, the pressure, the medium handled (clean air or with particles), the temperature and the mounting type. The HR is high-pressure and exists with a built-in frequency drive (HR-INV), the GR and GT are medium-pressure, and the DN is low-pressure.
How do I request a DIETZ-motoren quotation?
Send the DIETZ-motoren code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: DIETZ-motoren GmbH (manufacturer documentation)

