Emec supplier in Romania
Dosing pumps for chemicals and water treatment
Headquarters: Rieti, Italy
Who is Emec and what does it make?
EMEC is an Italian manufacturer of dosing pumps and disinfection systems, headquartered in Rieti, oriented towards water treatment and chemical dosing in industry and in the recreational sector. From the EMEC range we can quote the VMS series solenoid pumps and the self-venting VMSA version, alongside the PRISMA stepper motor pumps and the PRIUS electric motor pumps, suitable for installations that require constant and repeatable dosing.
The VMS series covers a wide range of flow-pressure combinations, from models of 1 l/h at 20 bar for fine dosing, up to versions of 10-16 l/h at low pressures for processes that are less demanding hydraulically. The PH and PO versions integrate proportional control based on a pH or Redox sensor, and the MF version adds digital recovery and maintenance functions. The PRISMA series, with a stepper motor, is promoted for high precision and fine control of the dosing speed, useful with expensive reagents where waste matters.
For the Romanian market, the EMEC range makes sense for swimming pools, wastewater treatment plants, the food industry and drinking water disinfection installations, wherever the process requires a reliable dosing pump that is easy to integrate into an existing controller.
What do we supply from the Emec range?
| Product | Description |
|---|---|
| VMS series | Standard solenoid dosing pump, with 16 flow and pressure versions, from 1 l/h at 20 bar up to 16 l/h at low pressures. Typical application: dosing chlorine or coagulant in water treatment installations. |
| VMSA series (self-venting) | A version of the VMS series with automatic evacuation of gas bubbles from the dosing head, in 13 flow-pressure combinations, useful with reagents that release gas during dosing. |
| VMS-PH and VMS-PO | Proportional versions of the VMS series, with dosing control based on an integrated pH or Redox potential sensor, for automatic water correction. |
| PRISMA series | Dosing pump with a stepper motor, promoted for fine control of the dosing speed and high repeatability, suitable for expensive reagents or precision dosing. |
| PRIUS series | Dosing pump with a classic electric motor. |
Why Emec?
- VMS range with 16 versions and VMSA with 13 versions — fine coverage of flow-pressure combinations
- Versions with proportional PH and PO control — dosing linked directly to a process sensor
- PRISMA series with stepper motor — high precision for costly reagents
- More than 16 industrial sectors served — a range tested in diverse applications
- Multiple supply voltages available — 230 VAC, 115 VAC, 24 VAC or 24/12 VDC, easy to integrate
Which Emec codes and series are requested most often?
| Code | Description |
|---|---|
| VMS 2001 | VMS version, approx. 1 l/h at 20 bar |
| VMS 1502 | VMS version, 2 l/h at medium pressure |
| VMS 1505 | VMS version, 5 l/h at medium pressure |
| VMS 1004 | VMS version, 4 l/h at 10 bar |
| VMS 1010 | VMS version, 10 l/h at 10 bar |
| VMS 0116 | VMS version, 16 l/h at low pressure |
| VMS 0512 | VMS version, 12 l/h at low pressure |
| VMSA | Self-venting family of the VMS series, 13 versions |
| VMS-MF | Multifunction digital version with level control |
| VMS-PH | Proportional version with integrated pH probe |
| VMS-PO | Proportional version with pH or Redox probe |
| PRISMA | Stepper motor pump, fine control |
| PRIUS | Dosing pump with electric motor |
| WN (WNPHxx) | Family dedicated to swimming pools and spa installations |
Where is Emec equipment used?
- Swimming pools and SPAs — disinfection and automatic control of water parameters
- Drinking water treatment — legionella prevention and biocide dosing
- Food and beverage industry — dosing of process additives
- Cooling towers — anti-scale treatment
- Agriculture — fertigation and nutrient dosing
How do we supply Emec in Romania?
We bring in EMEC pumps made to order, through EU supply channels, without holding ready availability on any variant of the VMS or PRISMA series. The technical information above comes from the manufacturer's technical documentation, so we tell you openly what we can confirm from the catalogues and what remains to be checked at the time of ordering, especially for the less common variants. Made to order, usually 1–4 weeks, depending on the manufacturer's confirmation. For a quotation, we need the dosed fluid, the flow and pressure in the installation and, where applicable, the type of sensor the pump connects to.
We check the available stock for a specific VMS variant on request; warranty service is handled by the manufacturer.
Frequently asked questions about Emec
What products does EMEC make?
EMEC makes electromagnetic and motor-driven dosing pumps for dosing water treatment chemicals, plus disinfection systems used in swimming pools, the food industry and drinking water stations. The main range, the VMS series, covers flow combinations between 1 and 16 l/h at pressures from 1 to 20 bar.
How do I choose an EMEC pump by code?
The VMS code is followed by digits indicating the flow and the maximum pressure, and letters such as PH or PO indicate a proportional version with an integrated sensor. Send us the fluid, the desired flow and the pressure in the installation, and we identify the correct version from the VMS or VMSA range.
What is the equivalent of the EMEC VMS series?
The EMEC VMS series is a solenoid dosing pump; equivalence with other brands is checked model by model, on flow, pressure and materials.
Can you supply EMEC pumps in Romania and within what lead time?
Yes, we bring in EMEC pumps made to order from European sources, usually in 1–4 weeks, depending on the manufacturer's confirmation of availability. We make no promise of warehouse availability, and the final lead time is confirmed after you place the order.
What data do you need for an EMEC pump quotation?
Send us the type of fluid dosed, the flow needed in litres per hour, the pressure in the installation and, if you already have a pH or Redox sensor fitted, specify it. With this information we check the suitable version in the VMS or PRISMA range and prepare the quotation.
How do I request a Emec quotation?
Send the Emec code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 12 November 2026 · Sources: EMEC S.r.l. (manufacturer documentation)