Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

EMKA supplier in Romania

For EMKA we quote quarter-turn locks, rod locking systems, hinges, handles, sealing profiles and electronic locks for cabinets; we need the item code, the door thickness and the number of locking points.

Founded in 1932 · Headquarters: Velbert, Germany

Request a quote

Who is EMKA and what does it make?

EMKA, founded in 1932 in Velbert, Germany, makes locks, locking systems, hinges, sealing profiles and electronic access systems for control cabinets, enclosures and technical doors. The range is grouped into locks and latches, locking systems, hinges, sealing and edge protection profiles, electronics (locks, modules, sensors, accessories and software) and accessories.

The basic element is the quarter-turn lock: a quarter turn of the cam closes the door, with resistance to vibration. Variants include insert, handle, cylinder, tool-free mounting and compression latch versions (for example 1000-U852 and 1000-U902), as well as safety locks with double-bit inserts 3 and 5, certified to DIN 43668 for electrical installations. Code 1002-U1 is a quarter-turn lock in galvanised steel, in a left or right version, for heavy loads. For tall doors, rod systems are used: flat rods (mainly in Europe) or round rods, swing and lift handles, rod controls, guides and strike plates. The complete polyamide plastic system has electrically non-conductive, corrosion-resistant components, for doors from 800 to 2200 mm and up to 16 locking points at 75 mm spacing.

The hinges include versions for protruding or flush doors, removable without tools, with adjustable torque, with pin, with spring and with weight compensation. The sealing profiles include clip-on profiles, push-fit profiles, edge protectors, sponge rubber and window profiles. For a quotation, the item code and the door height are needed.

What do we supply from the EMKA range?

ProductDescription
Quarter-turn locks and latchesInsert, handle, cylinder and tool-free mounting locks, compression latches and safety locks with double-bit inserts, in die-cast zinc, steel, stainless steel, aluminium or brass. Examples: 1000-U852 and 1000-U902.
Rod locking systemsSwing and lift handles, rosettes, rod controls (for example 1121-U26-K), flat and round rods, rod guides and strike plates. The polyamide components of the 1190 system are electrically non-conductive and corrosion-resistant, and the strike plate is made of galvanised steel.
HingesHinges for protruding or flush doors, removable without tools, with adjustable torque, with pin, with spring and with weight compensation. The 1055 series is for heavier loads, and the torque hinges match the 1056 range.
Sealing profiles and electronicsClip-on and push-fit profiles, edge protectors, sponge rubber, protective windows, as well as electromechanical locks, modules, sensors and software for access to cabinets and racks.

Why EMKA?

  • Quarter-turn locks with insert, handle or cylinder — chosen by security level and mounting method
  • Safety versions, certified to DIN 43668 — suited to electrical cabinets with access requirements
  • Flat or round rod systems, between 800 and 2200 mm — multi-point locking of tall doors
  • Electrically non-conductive plastic system with up to 16 locking points — for cabinets with insulation requirements
  • Hinges with adjustable torque, with spring and removable without tools — chosen by door mass and angle

Which EMKA codes and series are requested most often?

CodeDescription
1002-U1Quarter-turn lock in galvanised steel, for heavy loads
1000-U852Compression latch, square 8
1000-U902Push-fit quarter-turn, tool-free mounting
1121-U26-KRod control for flat rods
1190-30-01Polyamide rod guide, for the plastic system
1190-31-01Polyamide locking claw
1190-33-01Polyamide rod adapter
1190-34-02Galvanised steel strike plate
1055Screw-fixed hinge, for heavier loads
1056Hinge range compatible with the torque hinges
1095-35Spring handle in reinforced polyamide, M6 screw fixing
DIN 43668Standard for double-bit safety locks

Where is EMKA equipment used?

  • Control and distribution cabinets — quarter-turn locks, rods and hinges
  • Electronics and electrical engineering — locks and handles for enclosures
  • Machine building — compression latches, hinges and handles
  • Server racks — electromechanical locks and access systems
  • Technical enclosures — sealing profiles and edge protectors

How do we supply EMKA in Romania?

We can quote EMKA locks, hinges, handles and sealing profiles by item code. For an accurate quotation, send the code (for example 1002-U1, 1000-U852 or the 1190 series), the door height and thickness, the number of locking points, the rod type (flat or round), the cut-out dimensions and the material required. For an existing cabinet, add a photo of the lock or hinge. Supply is to order, usually in 1–4 weeks; items can ship in 24–72 h when the item is in stock, locally or at the supplier, and the exact date is set in the quotation.

The fit of a lock or hinge on an existing cabinet is confirmed in the quotation, based on the item code and the cut-out dimensions received.

Frequently asked questions about EMKA

What do 1000-U852, 1002-U1, 1190 and 1055 cover at EMKA?

1000-U852 is a compression latch, 1002-U1 is a quarter-turn lock in galvanised steel, for heavy loads, the 1190 family brings together the components of the plastic rod system (guide, claw, adapter), and 1055 is a screw-fixed hinge, for heavier loads.

How do I choose between a simple and a safety quarter-turn lock?

The simple quarter-turn lock has an insert, handle or cylinder, while the safety lock uses double-bit 3 or 5, certified to DIN 43668 for electrical installations, and the key cannot be removed while the lock is open. The choice depends on the access requirement. Send us the cabinet type and the security level required.

Do you supply EMKA products in Romania, and how quickly?

EMKA items are supplied to order, usually in 1–4 weeks. They can ship in 24–72 h when the item is in stock, locally or at the supplier. For rod systems cut to length or versions with a special insert, the lead time can be longer; we confirm it in the quotation.

Can I replace an existing hinge or lock with an EMKA one?

Yes, after we compare the cut-out dimensions, the door thickness, the opening angle and the door mass. Send the code or a photo of the old part and the measured dimensions; we check the fit before the quotation.

What data do I send for a 1121-U26-K or 1190 rod system?

The door height and width, the rod type (flat or round), the number of locking points, the handle or cylinder type, the material and the position of the hinges. For the plastic system, the door height decides the number of claws and guides; add the quantity.

How do I request a EMKA quotation?

Send the EMKA code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 22 November 2026 · Sources: EMKA Beschlagteile GmbH & Co. KG (manufacturer documentation)