F.B. Pompe supplier in Romania
For F.B. Pompe we quote rewindable submersible motors of 6, 8 and 10 inch, submersible electric pumps from the FB6SX, FB8SX, FB10SX, FB12SX series and ICB, IC, SELF-CONTROL, DIR and DELTA control panels; we need the well diameter.
Founded in 1991 · Headquarters: Montorso Vicentino, Italy
Who is F.B. Pompe and what does it make?
F.B. Pompe is an Italian company from Montorso Vicentino (Vicenza), active since 1991, specialising in submersible electric pumps for wells, submersible motors and starter panels. The range includes water-filled rewindable motors from 4 to 10 inch, electric pumps from 4 to 12 inch and control panels for starting and protection.
The water-filled rewindable motors cover the sizes of 6, 8 and 10 inch, plus the 4-inch 4F series; at 4 inch there is also the oil-filled 4B series and resin motors, and at 6, 8 and 10 inch there are also HighTemp versions. Rated power starts from 0.5 HP and reaches 260 HP. The stator is made of AISI 304 steel, the rotor of AISI 420B, and the thrust bearing is bidirectional, of the Michell type. For wells with sand, the motor has a sand shield and a silicon carbide mechanical seal.
The electric pumps are radial or mixed-flow: FB4 and FB6R with Noryl impellers, FB6RX in pressed stainless steel, FB8R and FB10R in cast iron, and FB6SX, FB8SX, FB10SX and FB12SX mixed-flow in investment-cast stainless steel. The panels are IP55, with direct-on-line, stator-resistance, star-delta or single-phase capacitor starting. For a quotation, send the well diameter, the flow, the head and the motor power.
What do we supply from the F.B. Pompe range?
| Product | Description |
|---|---|
| Submersible motors | Water-filled rewindable motors at 6, 8 and 10 inch, 4-inch motors 4B, oil-filled, and 4F, water-filled, plus 4-inch resin motors, as well as HighTemp versions. Rated power ranges from 0.5 HP to 260 HP, with an AISI 304 steel stator and a Michell thrust bearing. |
| Electric pumps FB6SX, FB8SX, FB10SX and FB12SX | Mixed-flow pumps in investment-cast stainless steel, of 6, 8, 10 and 12 inch, for deep wells. They are used for water supply, irrigation, industry, mines, desalination and reverse osmosis. |
| Radial electric pumps FB4, FB6R, FB6RX, FB8R and FB10R | The 4-inch FB4 series and the 6-inch FB6R have Noryl impellers, FB6RX is in pressed AISI 304 and 316 stainless steel, and FB8R and FB10R are in cast iron. DELFI is the 5-inch series in the range. |
| Control panels | Single-phase starter panels ICB, IC and IC DUAL, the SELF-CONTROL electronic panel with dry-run protection and the BASIC, DIR, STA and DELTA electromechanical panels. All are made in protection class IP55. |
Why F.B. Pompe?
- Rewindable motors of 6, 8 and 10 inch, water-filled — the design allows the stator to be rewound
- HighTemp versions for 6, 8 and 10 inch — chosen for work at high temperatures
- FB6SX–FB12SX mixed-flow pumps in investment-cast stainless steel — for deep wells, in diameters of 6–12 inch
- Bidirectional Michell thrust bearing and silicon carbide seal — the motor withstands sand and axial loads
- SELF-CONTROL panels with dry-run protection, without probes — shutdown takes place without electrodes in the water
Which F.B. Pompe codes and series are requested most often?
| Code | Description |
|---|---|
| FB4 | 4-inch pumps with Noryl impellers |
| DELFI | 5-inch submersible pumps |
| FB6R | 6-inch radial pumps, Noryl impellers |
| FB6RX | 6-inch radial pumps, pressed stainless steel |
| FB6SX | 6-inch mixed-flow pumps, investment-cast stainless steel |
| FB8R | 8-inch radial pumps, cast iron |
| FB8SX | 8-inch mixed-flow pumps, investment-cast stainless steel |
| FB10R | 10-inch radial pumps, cast iron |
| FB10SX | 10-inch mixed-flow pumps, investment-cast stainless steel |
| FB12SX | 12-inch mixed-flow pumps, investment-cast stainless steel |
| ICB | Single-phase starter panel with integrated capacitor |
| SELF-CONTROL | Electronic panel with dry-run protection, without probes |
Where is F.B. Pompe equipment used?
- Water supply — drilled wells with submersible electric pumps
- Agriculture and irrigation — pumping from deep wells
- Mines — dewatering in harsh conditions
- Desalination and reverse osmosis — special electric pumps for sea water or brackish water
- Industry — systems with process water from wells
How do we supply F.B. Pompe in Romania?
We can quote F.B. submersible electric pumps, submersible motors and control panels suited to your well. For an accurate quotation, send the inside diameter of the well, the depth of the dynamic level, the required flow and pumping head, the motor power and voltage, and the type of water. Supply is to order, usually in 1–4 weeks; depending on the specification, the lead time may be longer and is stated in the quotation.
For motors and pumps whose series is already installed, we check mechanical and electrical compatibility in the quotation before ordering.
Frequently asked questions about F.B. Pompe
What are the FB6R, FB6SX and FB12SX series and the ICB panel at F.B. Pompe?
F.B. Pompe, from Montorso Vicentino, Italy, has made submersible electric pumps for wells, rewindable submersible motors and control panels since 1991. The pumps range from 4 to 12 inch, and the motors from 0.5 HP to 260 HP, in water-filled, oil-filled and resin versions. FB6R are 6-inch radial pumps with Noryl impellers, FB6SX and FB12SX are mixed-flow pumps in investment-cast stainless steel, and ICB is a single-phase starter panel with integrated capacitor.
How do I choose between a radial and a mixed-flow pump?
The choice depends on the well data and the water: the radial series are in cast iron (FB8R, FB10R), Noryl (FB4, FB6R) or pressed stainless steel (FB6RX), while the mixed-flow ones, such as FB6SX and FB10SX, are in investment-cast stainless steel. Send the well diameter, the flow and the pumping head, and we then check the series.
Do you supply F.B. Pompe in Romania, and how fast?
Yes. Electric pumps, motors and panels are ordered; it usually takes 1–4 weeks, and items can ship in 24–72 h when the item is in stock, locally or at the supplier. The precise date appears in the quotation.
Can I replace only the submersible motor and keep the pump?
Yes, if the flange, the 6, 8 or 10 inch diameter and the power are compatible with the existing pump. F.B. motors of 6, 8 and 10 inch are rewindable. Send the nameplate of the motor and of the pump, and we check compatibility before the quotation.
What data do I send for a quotation for an FB6SX or FB8R electric pump?
For FB6SX, FB8R or another series, send the inside diameter of the well, the installation depth, the flow and the pumping head, the mains voltage and frequency, the type of water and, if you have it, the nameplate of the current pump. For a panel, add the type of starting you want.
How do I request a F.B. Pompe quotation?
Send the F.B. Pompe code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: F.B. S.r.l. (manufacturer documentation)

