Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

FELUWA supplier in Romania

Diaphragm pumps for slurries and abrasive suspensions

Headquarters: Mürlenbach, Germany

Request a quote

Who is FELUWA and what does it make?

FELUWA is a German manufacturer of double-tube diaphragm pumps, headquartered in Mürlenbach, specialising in transporting abrasive, chemically aggressive or toxic fluids that would quickly destroy an ordinary centrifugal pump. The main range, MULTISAFE, is organised into three construction types — simplex (SG), triplex (TG/TGK) and quintuplex (QGK) — plus the EcoTrans MULTISAFE variant for low pressures and faster delivery. For the Romanian market we can quote from the FELUWA range where the slurry, mineral suspension or chemical product being transported calls for a pump with double isolation, not a standard solution.

FELUWA double-tube technology separates the process fluid from the hydraulic system through a double rubber or elastomer tube, with monitoring of the space between the two membranes for early detection of a possible crack. The range covers flow rates of up to 1,350 m³/h and pressures of up to 350 bar, with variants from SG 70 for low power to TGK 500 and QGK 500 for high-capacity installations, with motor powers from a few kW up to a few thousand kW. Among diaphragm pumps for abrasive media, FELUWA is found in mining and sludge treatment.

In mining, wastewater treatment and the chemical industry, FELUWA provides access to pumps able to transport abrasive slurries or mineral suspensions at high pressures, with the additional safety given by the double isolation of the process fluid.

What do we supply from the FELUWA range?

ProductDescription
MULTISAFE Simplex, SG SeriesDouble-tube diaphragm pumps in simplex design, with a single pumping cylinder, available in several sizes from SG 70 to SG 250, with drive power from a few kW up to 150 kW. Recommended for low or medium capacity applications where a single cylinder covers the required flow. Typical application: dosing or transfer of mineral suspensions in low-capacity installations; the customer needs to confirm the required flow rate and discharge pressure.
MULTISAFE Triplex, TG and TGK SeriesDouble-tube diaphragm pumps in triplex design, with three pumping cylinders for a more uniform flow, from TG 70 up to TGK 500 for high-capacity installations, with drive power from 3 kW to 2,800 kW. Typical application: transport of mining slurry or abrasive suspensions over long distances; the customer needs to state the flow rate, the pressure and the solids content of the fluid.
MULTISAFE Quintuplex, QGK SeriesDouble-tube diaphragm pumps with five pumping cylinders, designed for the high capacities in the FELUWA range, with drive power of up to 3,500 kW for the QGK 500 variant. Typical application: high-capacity industrial installations where the required flow exceeds what a triplex design can cover; the customer needs to provide the full installation parameters for sizing.

Why FELUWA?

  • Double-tube technology, which separates the process fluid from the hydraulic system through two independent membranes
  • Monitoring of the space between the membranes, for early detection of a possible crack
  • Wide range of capacities, from SG 70 for low power to TGK 500 and QGK 500 for large installations
  • Working pressures of up to 350 bar, useful for transporting slurries over long distances
  • EcoTrans MULTISAFE variant with faster delivery, for low pressures and universal applications

Which FELUWA codes and series are requested most often?

CodeDescription
SG 70-DSsimplex pump, low power
SG 100-DSsimplex pump, medium power
SG 130-DSsimplex pump, medium size
SG 135-DSsimplex pump, higher power
SG 200-DSsimplex pump, high capacity
SG 250-DSsimplex pump, maximum capacity in the SG series
TG 70-3DStriplex pump, low-to-medium power
TG 100-3DStriplex pump, small size
TG 130-3DStriplex pump, medium size
TG 135-3DStriplex pump, higher power
TG 200-3DStriplex pump, high capacity
TGK 300-3DStriplex pump, high industrial capacity
TGK 400-3DStriplex pump, high industrial capacity
TGK 500-3DStriplex pump, maximum capacity in the TGK series
QGK 250-5DSquintuplex pump, very high capacity
QGK 400-5DSquintuplex pump, very high capacity
QGK 500-5DSquintuplex pump, maximum capacity in the range

Where is FELUWA equipment used?

  • Mining — transport of slurry and abrasive mineral suspensions
  • Chemicals — pumping aggressive or toxic fluids with double isolation
  • Wastewater treatment — transport of sludge from treatment plants
  • Energy — industrial applications with high working pressures

How do we supply FELUWA in Romania?

We supply FELUWA pumps through EU supply channels, to order; the lead time is confirmed before the quotation and, for high-capacity TGK and QGK configurations, it may be longer depending on the specifications. We rely on the manufacturer's technical documentation and check each order before quoting. For a quotation we need the type of fluid transported, the solids content, the flow rate and the required discharge pressure. For the EcoTrans MULTISAFE variant, with lower pressures, the delivery time may be shorter, but it is still confirmed before the quotation.

The lead time for a high-capacity TGK or QGK configuration is stated in the quotation, based on the full specifications of the installation.

Frequently asked questions about FELUWA

What does FELUWA make?

FELUWA makes double-tube diaphragm pumps, designed for abrasive, chemically aggressive or toxic fluids that would destroy an ordinary centrifugal pump. The MULTISAFE range covers simplex, triplex and quintuplex designs, with flow rates of up to 1,350 m³/h and pressures of up to 350 bar.

How do I choose the right design for a FELUWA MULTISAFE pump?

The choice between simplex, triplex or quintuplex depends on the required flow rate and the desired uniformity of the flow; for large capacities, triplex or quintuplex designs are recommended. Send us the flow rate, the discharge pressure and the solids content of the fluid so we can check the right model.

Can you supply FELUWA pumps in Romania, and in what time?

Yes, we supply FELUWA pumps to order through EU supply channels; the lead time is set after checking the code and, for high-capacity TGK and QGK configurations, it may be longer depending on the specifications. This range is supplied to order, so the exact lead time is confirmed once the technical specifications of the application have been sent.

What should I send for a FELUWA pump quotation for mining slurry?

State the desired flow rate, the discharge pressure, the solids content and the particle size in the slurry. With this data we check which design in the MULTISAFE range (SG, TG/TGK or QGK) suits your installation.

How do I request a FELUWA quotation?

Send the FELUWA code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 20 November 2026 · Sources: FELUWA Pumpen GmbH (manufacturer documentation)