GemmeCotti supplier in Romania
For Gemme Cotti we quote the HTM and HCM magnetic drive pumps, the HTT turbine pumps, the EM-C pumps for explosion-risk areas and the HVL vertical pumps; we need the pump code or the liquid, the concentration, the temperature and the duty point.
Founded in 1992 · Headquarters: Cesate, Italy
Who is GemmeCotti and what does it make?
Gemme Cotti (GemmeCotti) has designed and manufactured chemical pumps for acids and hazardous liquids since 1992, at Cesate, near Milan. The speciality is magnetic drive pumps, with no shaft seal: the outer magnet, connected to the motor, transmits the torque to the inner magnet without contact, and the rear casing seals the hydraulic part hermetically. For a chemical plant this means zero leaks and emissions when pumping acids, bases and aggressive solutions. The pumps are made from thermoplastics, polypropylene (PP) or PVDF, or from AISI 316 stainless steel, with conformity to the applicable directives stated in the manufacturer's documentation.
The range includes HTM and HCM magnetic drive centrifugal pumps, up to 130 m³/h and 48 m head, HTM SS 316 in stainless steel, HTM SP self-priming pumps, HTT and HTA turbine pumps, up to 9 m³/h and 50 m, HPP/HPF and HTP vane pumps, up to 2,100 l/h and 13 bar, and HCO centrifugal pumps with mechanical seal. For areas with an explosive atmosphere there is the EM-C, EM-T, EM-P and EM-CO series, according to the manufacturer's documentation. The HVL, HV and HTM-V vertical pumps are mounted directly in the tank, with columns from 320 to 2,000 mm, and PVA, in AISI 316, is designed for the production of printed circuit boards. The range is completed by pneumatic double-diaphragm pumps, portable pumps, drum pumps, agitators and self-priming metering pumps.
The parts come from qualified Italian suppliers and are machined and checked by Gemme Cotti staff, and each pump is assembled in the in-house workshop and tested on a test bench before dispatch. The quality system has certifications specified in the manufacturer's documentation. The pumps work in the chemical and petrochemical industry, pharmaceuticals, refineries, electroplating, printed circuit board production, water treatment, pulp and paper, textiles, sugar and the food industry. For a quotation, send us the full pump code or the liquid pumped, the concentration, the temperature, the flow rate and the pumping head.
What do we supply from the GemmeCotti range?
| Product | Description |
|---|---|
| HTM and HCM magnetic drive centrifugal pumps | Pumps in PP or PVDF up to 130 m³/h and 48 m: HTM with injection-moulded parts, HCM with the pump body machined from solid, plus HTM SS 316 in stainless steel, up to 32 m³/h and 24 m, and the HTM SP self-priming pump, with priming up to 6 m. The magnetic drive eliminates the shaft seal. |
| HTT, HTA, HPP/HPF and HTP turbine and vane pumps | Pumps for small flows and higher pressures: HTT regenerative turbine pumps, including the HTT-SP self-priming pump, and HTA in AISI 316, up to 9 m³/h and 50 m, plus HPP/HPF and HTP rotary vane pumps in AISI 316, up to 2,100 l/h and 13 bar, all with magnetic drive. |
| EM series for explosion-risk areas | Pumps for areas with an explosive atmosphere: EM-C centrifugal, EM-T turbine and EM-P vane pumps, in AISI 316 or in PP/PVDF, the self-priming variants EM-C SP and EM-T SP, and EM-CO, a centrifugal pump with mechanical seal, for transferring chemicals in classified areas. |
| HVL, HV, HTM-V and PVA vertical pumps | Vertical centrifugal pumps immersed directly in the tank: HVL in PP or PVDF, up to 130 m³/h, with a 500–2,000 mm column, HV up to 40 m³/h, HTM-V with magnetic drive and a 320 mm column, and cantilever PVA, in AISI 316, for the production of printed circuit boards. |
Why GemmeCotti?
- Magnetic drive with no shaft seal — zero leaks and emissions with acids and aggressive liquids
- PP, PVDF or AISI 316 — the pump material is chosen according to the chemical compatibility of the liquid
- EM series — centrifugal, turbine and vane pumps for areas with an explosive atmosphere
- Every pump tested on a test bench — performance and operation are checked before dispatch
- Vertical pumps with a 320–2,000 mm column — mounted directly in the tank, without suction piping
Which GemmeCotti codes and series are requested most often?
| Code | Description |
|---|---|
| HTM PP/PVDF | Magnetic drive centrifugal pump, injection-moulded parts, up to 130 m³/h |
| HCM PP/PVDF | Magnetic drive centrifugal pump, body machined from solid |
| HTM SS 316 | Magnetic drive centrifugal pump in AISI 316, up to 32 m³/h |
| HTM SP | Self-priming magnetic drive centrifugal pump, priming up to 6 m |
| HTT | Regenerative turbine pump with magnetic drive |
| HTT-SP | Self-priming turbine pump with magnetic drive |
| HTA | Turbine pump with magnetic drive in AISI 316 |
| HPP/HPF | Rotary vane pump with magnetic drive |
| HTP | Rotary vane pump in AISI 316 |
| EM-C | Centrifugal pump in a version for explosion-risk areas, with magnetic drive |
| EM-T | Turbine pump in a version for explosion-risk areas, with magnetic drive |
| EM-P | Vane pump in a version for explosion-risk areas, with magnetic drive |
| EM-CO | Centrifugal pump in a version for explosion-risk areas, with mechanical seal |
| HCO | Thermoplastic centrifugal pump with mechanical seal |
| HVL | Vertical pump in PP/PVDF, 500–2,000 mm column |
| PVA | Cantilever vertical pump in AISI 316 |
Where is GemmeCotti equipment used?
- Chemical and petrochemical industry — transfer of acids, bases and aggressive solutions
- Electroplating and printed circuit boards — HVL and PVA vertical pumps in the process baths
- Water treatment — transfer of reagents with PP and PVDF pumps
- Pharmaceutical industry — magnetic drive pumps, with no leaks at the shaft
- Pulp, paper and textiles — transfer of process chemicals
How do we supply GemmeCotti in Romania?
We can quote Gemme Cotti HTM, HCM, HTT and HPP magnetic drive pumps, pumps from the EM series for explosion-risk areas, HVL and HV vertical pumps, HCO pumps with mechanical seal and spare parts for them. For a correct quotation, send us the full code from the nameplate or, for a new application, the liquid pumped and its concentration, the temperature, the density, the flow rate, the pumping head, the material wanted (PP, PVDF or AISI 316) and whether the area is classified as an explosion-risk area. We supply the pumps to order, through EU supply channels, usually in 1–4 weeks; items can ship in 24–72 h when the item is in stock, locally or at the supplier, and for ATEX versions, depending on the specifications, the lead time can be longer.
We determine the compatibility of the material with a new chemical mixture from the data you send us, and the functional test with the actual liquid is carried out in your installation.
Frequently asked questions about GemmeCotti
What does Gemme Cotti make?
Since 1992 Gemme Cotti has made chemical pumps for acids and hazardous liquids in Italy: magnetic drive centrifugal, turbine and vane pumps, pumps with mechanical seal, vertical pumps, pumps for explosion-risk areas, pneumatic double-diaphragm pumps, drum pumps and agitators, in PP, PVDF or AISI 316.
How do I choose the material of a Gemme Cotti pump?
The material is chosen according to the liquid, the concentration and the temperature: thermoplastics, that is polypropylene or PVDF, or AISI 316 stainless steel. For the same pump family there can be several versions, for example HTM in PP, PVDF or stainless steel. Send us the safety data sheet of the liquid and the working temperature, and we check compatibility before the quotation.
Do you supply Gemme Cotti pumps in Romania? How fast?
Yes, through EU supply channels. We bring in standard pumps and spare parts usually in 1–4 weeks, and items can ship in 24–72 h when the item is in stock, locally or at the supplier. For ATEX or customised versions, depending on the specifications, the lead time can be longer.
Can I switch from a pump with mechanical seal to one with magnetic drive?
It can be analysed, if the duty point and the liquid allow it. We need the flow rate and the pumping head, the temperature and density of the liquid, the presence of solid particles and the connection dimensions of the old pump. On that basis we propose an HTM, HCM or HTT pump, or keep the HCO variant with mechanical seal.
What data do I send for a quotation on a Gemme Cotti pump?
The full code from the nameplate, if you are replacing an existing pump. For a new application: the liquid and the concentration, the temperature, the density and the viscosity, the flow rate and the pumping head, the suction head, the motor voltage and the ATEX classification of the area. For vertical pumps, add the depth of the tank, so that we choose the column length.
How do I request a GemmeCotti quotation?
Send the GemmeCotti code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 20 November 2026 · Sources: GemmeCotti (manufacturer documentation)

