Grundfos HVAC supplier in Romania
Pumps and solutions for heating and cooling systems
Founded in 1945 · Headquarters: Bjerringbro, Denmark
Who is Grundfos HVAC and what does it make?
For almost 80 years, Grundfos has made circulation pumps for heating, air conditioning and domestic hot water. A Grundfos ALPHA3 pump, with an ECM motor and automatic control, uses less electricity than an old fixed-speed pump. The range includes residential circulation pumps (ALPHA, UPS), industrial HVAC pumps (TPE, NBE, NKE), pumps for solar systems (SOLAR), pressure pumps (SCALA, CME), and twin/triplex pump systems with redundancy.
Grundfos technology combines high-efficiency ECM (Electronically Commutated Motor) motors with AUTOADAPT automatic control – the pump detects the system demand and adjusts the speed in real time to deliver exactly the flow required. Result: significantly lower electricity consumption than old on/off pumps. The ALPHA3 series has wireless communication – it is configured from a smartphone through Grundfos GO. For industry, the MAGNA3 series offers, depending on the model, twin-head versions for redundancy (if one pump fails, the other takes over automatically).
The connectivity and communication protocols available depend on the model chosen. EU Regulation 641/2009 applies to glandless (wet rotor) circulators and requires EEI ≤ 0.23 from 1 August 2015; pumps with a shaft seal (for example the in-line TPE series) are outside the scope of this regulation.
What do we supply from the Grundfos HVAC range?
| Product | Description |
|---|---|
| Grundfos ALPHA3 circulation pumps (residential high-efficiency) | Pump for underfloor heating and radiators in houses/apartments – ECM motor; power consumption depends on the model and is confirmed from the datasheet. Three operating modes: AUTOADAPT (automatic adjustment for minimum consumption), Constant Pressure (constant pressure for radiators), Constant Curve (operation on a fixed characteristic). A digital display shows instantaneous consumption (Watts), water temperature and alarms. Grundfos GO communication via Bluetooth – set the mode, see consumption statistics, receive notifications. Auto-deaeration – detects air and temporarily increases the speed to remove it. Connections: threaded 1" or 1 1/4", port-to-port length 130mm or 180mm (European standard). The liquid temperature range depends on the model and is confirmed from the Grundfos datasheet. Energy class A (EEI 0.20). |
| Grundfos MAGNA3 industrial pumps (commercial/industrial HVAC) | The heavy-duty series for commercial buildings, hospitals, hotels and industry – flow and head depend on the model; we confirm them by code, from the Grundfos documentation. Motor with a neodymium magnet rotor; the motor efficiency class is confirmed from the datasheet. Integrated control with several control modes: AUTOADAPT, Constant Pressure, Proportional Pressure, Constant Flow, Constant Curve, Constant Temperature, and others. Twin-head available – two pumps in parallel, and if one fails the other takes over 100%. Graphic display; the functions shown are confirmed from the datasheet. Communication: Modbus RTU/TCP, BACnet MS/TP, Profibus DP, LonWorks – full integration into the BMS. Integrated differential pressure sensor – measures the system pressure and adjusts automatically. Flanged connections of 25-100 mm (DN25-DN100), according to the Grundfos list cited; the range is confirmed from the datasheet. Materials differ by model and are confirmed from the Grundfos datasheet. The EEI value differs by model and is confirmed from the datasheet. The maximum liquid temperature depends on the model and is confirmed from the datasheet. |
| Grundfos SOLAR pumps for solar thermal systems | Special pumps for circulating the glycol-water mixture in solar thermal panels – resistant to extreme temperatures and to stagnation (when the panels boil in summer with no consumption). The working temperature and the resistance to stagnation depend on the model and are confirmed from the datasheet. High-temperature ECM motor with special Class H insulation. Anti-seizing function – if the pump stands idle for a long time (in winter), it rotates automatically from time to time to prevent seizing. Integrated control for solar systems – starts when the difference between panel and boiler temperature exceeds the setpoint (for example ΔT=8°C start, ΔT=3°C stop). Versions: PM (simple pump module without control – use with a separate solar controller) or complete with an integrated differential controller. 1" threaded connections. The flow and the maximum permitted glycol concentration depend on the model and are confirmed from the datasheet. Installed only in the primary circuit (panel-boiler), not in the consumption circuit. |
| Grundfos SCALA2 booster set (smart pressure pump) | Automatic pressure system for houses without a mains connection (well/borehole) or for buildings with insufficient pressure. All-in-one: centrifugal pump + ECM motor + pressure controller + dry-run protection + integrated expansion vessel (the volume is confirmed from the datasheet). Automatic operation – detects the opening of the tap (pressure drop) and starts instantly, stopping automatically when you close the tap. The default pressure is 3 bar; the setting range depends on the model and is confirmed from the datasheet. The flow and suction depth depend on the model; we confirm them by code, from the Grundfos documentation. Protection against running without water; the exact restart behaviour is confirmed from the datasheet. An LED display shows the set pressure and the status (operation/alarm). Grundfos GO wireless communication – configuration and diagnostics from a phone. 1" or 1 1/4" connections. The IP protection rating and installation conditions are confirmed from the datasheet. Noise levels below 47 dB(A). Applications: isolated houses with a well, villas with weak pressure, garden irrigation systems, small car washes. |
Why Grundfos HVAC?
- Significant energy savings compared with old fixed-speed pumps – ECM motor + AUTOADAPT control
- EEI ≤ 0.23 – the requirement of EU regulation 641/2009 for glandless circulators, in force from 1 August 2015
- Grundfos GO wireless communication – configuration and monitoring from a smartphone
- Integrated auto-deaeration – removes air from the system automatically, with no manual intervention
- Materials and bearings differ by model; details are confirmed from the Grundfos datasheet
- Silent operating mode - availability of the function is confirmed from the datasheet of the model
Which Grundfos HVAC codes and series are requested most often?
| Code | Description |
|---|---|
| ALPHA3 | Domestic circulation pump, high energy efficiency |
| ALPHA1 | Domestic circulation pump, basic model |
| UPS3 | Domestic circulation pump for heating and hot water |
| UPS2 | Domestic circulation pump, previous generation UPS3 |
| MAGNA1 | Commercial circulation pump with variable speed |
| MAGNA3 | Commercial circulation pump with composite rotor and DeltaP/T sensor |
| TP | Fixed-speed in-line pump for domestic hot water |
| TPD | Fixed-speed in-line pump with twin heads |
| TPE | Variable-speed in-line pump with high-efficiency motor |
| TPED | Variable-speed in-line pump with twin heads |
| TPE2 | Variable-speed in-line pump, 2nd generation |
| TPE2 D | Variable-speed in-line pump with twin heads, 2nd generation |
| TPE3 | In-line pump with built-in differential pressure and temperature sensor |
| TPE3 D | In-line pump with twin heads and built-in DP+T sensor |
| SCALA2 | Compact booster set for constant pressure in homes |
| CUE | Variable frequency drive with RFI filter for Grundfos pumps |
Where is Grundfos HVAC equipment used?
- Residential – houses, apartments, villas (heating + domestic hot water)
- Commercial – office buildings, shops, restaurants
- Hospitals – heating, air conditioning, hot water (strict redundancy requirements)
- Hotels – thermal comfort and hot water for guests
- Industry – heating of halls, air conditioning of production spaces
- Agriculture – greenhouse heating, air conditioning of animal farms
- Swimming pools – water heating, dehumidification
- Solar thermal systems – glycol circulation in panels
- Passive houses/nZEB – ultra-efficient HVAC systems
- Geothermal systems – circulation in geothermal probes
How do we supply Grundfos HVAC in Romania?
For Grundfos HVAC pumps we work from the manufacturer's technical documentation; the exact availability is confirmed in the quotation. Supply is through EU supply channels: as a general rule, common residential models (ALPHA3, UPS, SCALA2) can be supplied in 24–72 h when the item is in stock, locally or at the supplier, while large industrial models (MAGNA3, TPE) or special configurations follow the flow of usually 1–4 weeks to order. For a correct calculation we need the installed thermal output, the required head and the type of system (residential, commercial, industrial). Without these parameters we risk recommending an unsuitable model or an incorrect delivery time.
Availability of each Grundfos HVAC model is checked on each request; warranty service is handled through the manufacturer's network.
Frequently asked questions about Grundfos HVAC
What is the difference between Grundfos ALPHA3 and MAGNA3 circulation pumps?
The ALPHA3 is designed for domestic heating installations, with high energy efficiency and simple installation, while the MAGNA3 is a commercial variable-speed pump with a composite rotor and an integrated differential pressure and temperature sensor, suited to larger buildings. The choice depends on the size of the installation and the flow required.
What do the codes TPE2 and TPE3 mean for Grundfos pumps?
Both are variable-speed in-line pumps, but the TPE3 adds a built-in differential pressure and temperature sensor for closed-loop control, unlike the TPE2, which may have an optional pressure transducer. Versions with D at the end, such as TPE2 D or TPE3 D, have two pump heads mounted together.
What is the Grundfos SCALA2 booster set?
The SCALA2 is a compact booster set designed for homes, which maintains constant water pressure even when several points of consumption are opened at the same time.
Do you supply Grundfos pumps for HVAC in Romania?
Yes, we supply Grundfos circulation and in-line pumps to order, based on the range published by the manufacturer, without holding a constant stock of our own. The lead time to order is usually 1–4 weeks, depending on the model, on whether fixed or variable speed is required and on the availability of the exact code at the manufacturer.
How do I request a Grundfos HVAC quotation?
Send the Grundfos HVAC code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 20 November 2026 · Sources: Grundfos, Grundfos Holding A/S (manufacturer documentation)

