Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Hidrostal supplier in Romania

Non-clogging screw centrifugal pumps for wastewater

Headquarters: Neunkirch, Switzerland

Request a quote

Who is Hidrostal and what does it make?

Hidrostal is a Swiss pump manufacturer, based in Neunkirch, known for the helical impeller (screw-shaped impeller) used in pumps for wastewater and sludge with a high solids content. The standard range comprises eight construction families: end-suction volute pumps, compact pumps, submersible pumps, immersible pumps, bearing frame pumps, axial diffuser pumps, axial column pumps and vertical turbines, to which is added the HidroMix external tank mixing system. For the Romanian market we can quote from this entire range, on the basis of a dedicated technical request submitted by the customer.

The difference from a classic centrifugal pump lies in the shape of the impeller: the open, continuous channel lets long and fibrous solids (textiles, films, roots) pass without wrapping around the impeller — the phenomenon that frequently blocks radial-vane pumps in wastewater treatment plants. Hidrostal states over 500 standard construction variants, combinable with about 40 types of motors or bearing frames, including the in-house TUMA family of submersible motors.

Hidrostal makes sense where frequent clogging of existing pumps causes stoppages and frequent interventions: urban wastewater treatment plants, sewers with solid waste, livestock farms with dense sludge or construction sites dewatering dirty water.

What do we supply from the Hidrostal range?

ProductDescription
End-Suction Volute PumpsDry installation, with end suction, direct or transmission coupling to a standard electric motor. The helical impeller allows solids to pass without clogging, recommended for pumping stations with easy access to the pump room and scheduled maintenance.
Submersible PumpsSubmersible installation with the TUMA motor integrated in the pump body, designed for wastewater pumping chambers and treatment plants where there is no dedicated technical room. The cable and housing are sealed for permanent operation in liquid.
Bearing Frame PumpsDry installation variant, with external bearings and transmission by coupling or belt to the motor, used where submersion is not possible or maintenance access must remain simple.
HidroMix — External Tank MixingExternal mixing system for digesters and sludge tanks: a Hidrostal helical-impeller pump, mounted outside the tank, draws in the sludge and returns it through nozzles, with no metal structures inside the tank.

Why Hidrostal?

  • Non-clogging helical impeller — continuous passage channel for long, fibrous solids, without wrapping around the impeller
  • Over 500 standard construction variants, combinable with about 40 motors or bearing frames
  • In-house TUMA submersible motors, integrated directly into the pump body
  • Flexible mounting — submersible, immersible, bearing frame or dry-mounted volute
  • SuperBetsy mobile system for temporary pumping during failures or one-off works
  • HidroMix external mixing system, with a helical-impeller pump mounted outside the tank, for sludge tanks

Which Hidrostal codes and series are requested most often?

CodeDescription
End Suction Volute Pumpsdry installation, end suction, coupling to electric motor
Compact Pumpscompact variant for reduced installation space
Submersible Pumpssubmersible installation, integrated TUMA motor, for pumping chambers
Immersible Pumpssemi-submersible installation for open basins
Bearing Frame Pumpsdry installation with external bearing frame, coupling by transmission
Axial Diffuser Pumpshigh flows at low pumping heads
Axial Column Pumpaxial column pump for drainage and irrigation stations
Vertical Turbine Pumpsvertical turbine for wells and deep basins
HidroMixexternal mixing system with helical-impeller pump, for sludge tanks
SuperBetsyindependent mobile pumping system for temporary interventions
PreroCleanself-cleaning pumping well, for removing floating and settled solids
Prerostalself-cleaning suction basin (wet-well), with Hidrostal helical-impeller pump
Floating Pump Systemfloating pumping system for basins and lakes

Where is Hidrostal equipment used?

  • Wastewater — pumping activated sludge and raw influent in treatment plants
  • Construction — dewatering of water containing sand and silt on site
  • General industry — transfer of fluids containing solids
  • Food industry — transfer of waste and sludge from processing

How do we supply Hidrostal in Romania?

For Hidrostal we work from the manufacturer's technical documentation: the range of helical impellers and the mounting variants above are those in the manufacturer's documentation; lead time and availability are specified in the quotation. We bring in pumps to order through EU supply channels, usually within 1–4 weeks depending on confirmation of availability at the manufacturer — every variant is supplied to order, since the number of standard combinations is very large. To prepare a correct quotation, we need the required flow and pumping head, the fluid type (wastewater, sludge, industrial water) and whether the installation requires submersible or dry mounting.

Availability for one of the more than 500 standard combinations is checked on each request, before the lead time is set.

Frequently asked questions about Hidrostal

What does Hidrostal make?

Hidrostal makes helical-impeller pumps (screw-shaped impeller) for wastewater, sludge and fluids with a high solids content, alongside the HidroMix external mixing system. The range covers dry, submersible, immersible or bearing-frame installation, in over 500 standard construction variants, suitable for treatment plants, sewers with solid waste and dewatering sites.

How do I choose a Hidrostal pump for a station with a lot of sand and textiles?

The choice starts from the required flow and pumping head, plus the type of solids in the fluid — for textiles and long fibres, the Hidrostal helical impeller is designed specifically to avoid wrapping around the impeller. Abrasive sand calls for wear-resistant materials on the casing and impeller, which we determine case by case, before the quotation.

What Hidrostal equivalent is there for an existing submersible wastewater pump?

Equivalence is worked out case by case. For a correct replacement we need the flow-head curve of the existing pump and the fluid type, so that we can find the Hidrostal variant with close parameters.

Can you supply Hidrostal pumps in Romania, and within what time?

Yes, we bring in Hidrostal pumps to order through EU supply channels, usually within 1–4 weeks, depending on confirmation of the construction variant at the manufacturer. Availability is checked for each combination, given the large number of combinations available.

What data do I need to send for a quotation for a Hidrostal pump?

Send the desired flow, the pumping head, the fluid type (wastewater, sludge, industrial water) and the preferred mounting type (submersible or dry). With this data we check the suitable variant in the Hidrostal range and confirm the delivery time.

How do I request a Hidrostal quotation?

Send the Hidrostal code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 20 November 2026 · Sources: Hidrostal AG (manufacturer documentation)