Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

HERMETIC-Pumpen supplier in Romania

Hermetic canned motor pumps for hazardous fluids

Founded in 1866 · Headquarters: Gundelfingen, Germany

Request a quote

Who is HERMETIC-Pumpen and what does it make?

HERMETIC-Pumpen is a German manufacturer of pumps without a mechanical seal, based in Gundelfingen, active in pump technology since 1866. The range covers canned motor pumps both with and without explosion protection, magnetic-drive pumps for hazardous media and liquid ring vacuum pumps for conveying and compressing gases. For the Romanian market we can quote from the HERMETIC range where a leak at the mechanical seal is not acceptable for reasons of safety, environment or maintenance cost.

The canned motor principle completely eliminates the rotating mechanical seal, fully isolating the pumped fluid from the outside environment — useful for toxic, flammable or extremely expensive fluids where a loss through the seal would be unacceptable. The refrigeration range, for example, covers types CNF (single-stage), CAM and its variants (multistage, for high-pressure CO₂) and LC for inverter cooling, with flows up to 85 m³/h and temperatures down to -50°C. The general industrial range reaches flows of 1,600 m³/h, pressures up to 120 MPa and temperatures between -160°C and +480°C, in line with EN 22858/ISO 2858 and API 685. In the segment of hermetic pumps, HERMETIC supplies critical equipment for the chemical and energy industries.

In chemicals, energy and refrigeration, HERMETIC-Pumpen means access to fully sealed pumps, without the risk of a leak through the mechanical seal, useful for hazardous fluids, extreme temperatures or high pressures where a pump with a conventional seal would require frequent maintenance.

What do we supply from the HERMETIC-Pumpen range?

ProductDescription
Canned Motor Pumps for Refrigeration, CNF/CAM SeriesSingle-stage (CNF) or multistage (CAM) canned motor pumps, designed for refrigeration circuits, with a flow of up to 85 m³/h for CNF (up to 45 m³/h for CAM), at temperatures between -50°C and +30°C. The CAMh and CAMhk versions are adapted for high-pressure CO₂ applications. Typical application: refrigerant circuits in industrial refrigeration plants; the customer needs to confirm the type of refrigerant and the required flow.
Industrial Canned Motor PumpsCanned motor pumps for general industrial applications, available with or without explosion protection, with a flow of up to 1,600 m³/h, system pressure of up to 120 MPa and working temperature between -160°C and +480°C, in line with EN 22858/ISO 2858 and API 685. Typical application: transfer of hazardous or extremely expensive fluids in chemicals and energy, where a leak is not acceptable; the customer needs to provide the fluid type, temperature and working pressure.
Magnetic-Drive PumpsCentrifugal pumps with magnetic coupling, which transmit rotation without direct mechanical contact between motor and impeller, eliminating the conventional rotating seal. An alternative to canned motor pumps for certain applications with different power or pressure requirements. Typical application: transfer of toxic media or media with sensitive emissions in chemical plants; the customer needs to state the required power and the compatibility of the wetted materials with the fluid.

Why HERMETIC-Pumpen?

  • Canned motor technology, without a rotating mechanical seal, eliminating the risk of external leakage
  • Refrigeration range with types CNF, CAM and specialised variants for high-pressure CO₂
  • Wide coverage of industrial parameters — flows up to 1,600 m³/h, system pressures up to 120 MPa
  • Compliance with EN 22858/ISO 2858 and API 685 for pumps without a mechanical seal
  • Over 150 years of history in pump technology, specialised in leak-free solutions

Which HERMETIC-Pumpen codes and series are requested most often?

CodeDescription
CNFcanned motor pump, single-stage, refrigeration
CAMcanned motor pump, multistage, refrigeration
CAMRcanned motor pump, radial suction
CAMhcanned motor pump, for high-pressure CO2
CAMhkcanned motor pump, high-pressure CO2 version
LCcanned motor pump for inverter cooling
Canned motor pumps - with Ex protectionpumps for explosive atmospheres
Canned motor pumps - without Ex protectionpumps for non-explosive atmospheres
Magnetic-drive pumpswithout rotating mechanical seal
Liquid ring vacuum pumpsfor conveying and compressing gases

Where is HERMETIC-Pumpen equipment used?

  • Energy — nuclear, solar, CO2 capture, wind energy, tank storage
  • Chemicals — transfer of hazardous fluids without leakage risk
  • Oil and gas — pumping process fluids at high pressures
  • Refrigeration — refrigerant circuits in industrial plants
  • Mobility — rail and marine applications with sealing requirements

How do we supply HERMETIC-Pumpen in Romania?

We supply HERMETIC pumps through EU supply channels, to order, usually in 1–4 weeks. Information about the range comes from the manufacturer's technical documentation; availability is confirmed model by model in the quotation. For a quotation we need the type of fluid handled, the working temperature and pressure, and whether the installation requires explosion protection. For complex industrial applications, we recommend sending the full process data sheet so that the correct pump configuration can be checked.

The configuration of a pump for an API 685 application is set based on the full data sheet of the industrial process.

Frequently asked questions about HERMETIC-Pumpen

What products does HERMETIC-Pumpen make?

HERMETIC-Pumpen makes pumps without a mechanical seal — canned motor or magnetic-drive — plus liquid ring vacuum pumps. The range covers applications from industrial refrigeration to chemicals and energy, where a leak through a seal is not acceptable.

What is the difference between a CNF and a CAM pump from HERMETIC-Pumpen?

CNF is a single-stage canned motor pump with a flow of up to 85 m³/h, while CAM is multistage, with a flow of up to 45 m³/h, so lower, and a nominal pressure of up to PN 52 (against PN 40 for CNF). The choice depends on the pressure required in the refrigeration circuit.

Do you deliver HERMETIC pumps in Romania, and in what lead time?

Yes, we supply HERMETIC pumps to order through EU supply channels, usually in 1–4 weeks. All models are supplied to order, and the exact lead time is confirmed once we receive the full specifications of the application.

What data do you need for a HERMETIC canned motor pump quotation?

Please state the type of fluid handled, the working temperature and pressure, the required flow and whether the installation requires explosion protection or API 685 compliance. With these data we check the suitable configuration from the HERMETIC range.

How do I request a HERMETIC-Pumpen quotation?

Send the HERMETIC-Pumpen code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 20 November 2026 · Sources: HERMETIC-Pumpen GmbH (manufacturer documentation)