Grindex supplier in Romania
For Grindex we quote submersible drainage pumps from the Minor, Major, Matador and Maxi series, Sandy, Senior and Salvador sludge pumps, Bravo pumps for abrasive slurries and the Inox versions; the item is identified by the series and number on the nameplate.
Founded in 1940
Who is Grindex and what does it make?
Grindex is a Swedish manufacturer of electric submersible dewatering pumps, based near Stockholm and active since 1940. The range is divided into four families: drainage pumps for large volumes of contaminated water, sludge pumps, pumps for abrasive slurries and stainless steel pumps. The pumps have built-in motor protection and an air valve, which lets them run unattended for long periods and run briefly without water.
Selection is made by the pumped medium. Drainage pumps, for example the Minor, Major, Matador or Maxi series, pass solids up to 12 mm and are made for large volumes of contaminated water in construction and heavy industry. Sludge pumps, such as Sandy, Senior and Salvador, handle thick mixtures with solids up to 80 mm, such as mud and light slurries. For strongly abrasive mixtures there is the Bravo series, from Bravo 200 to Bravo 900, with solids up to 50 mm, used for coal and ore, dredging and bentonite mud.
The Inox series means drainage and sludge pumps in stainless steel, for corrosive fluids with a pH between 2 and 10; it includes Minette Inox, Major Inox, Master Inox, Salvador Inox, Senior Inox and Sandy Inox. Between the Matador pumps, at 18 kW, and Maxi, at 37 kW, sits the Maxi H-Lite, at 25 kW, for heavy drainage in tight spaces. For a quotation, what matters is the series and number on the nameplate, the voltage, the head, the nature of the medium and the particle size of the solids.
What do we supply from the Grindex range?
| Product | Description |
|---|---|
| Minor, Major, Matador and Maxi drainage pumps | Submersible pumps for large volumes of contaminated water, with solids up to 12 mm. The range runs from small series, such as Minex, to the 18 kW Matador and the 37 kW Maxi, and the 25 kW Maxi H-Lite fills the gap between them. |
| Sandy, Senior, Salvador and Solid sludge pumps | Submersible pumps for thick mixtures, such as mud and light slurries, with solids up to 80 mm. They are chosen by the particle size of the solids, the viscosity of the mixture and the head. |
| Bravo 200–900 pumps for abrasive slurries | Submersible pumps for mixtures with abrasive solids up to 50 mm. They are used for coal and ore, dredging and bentonite mud. Eight sizes, from Bravo 200 to Bravo 900. |
| Inox stainless steel pumps | Drainage and sludge pumps in stainless steel, for corrosive fluids with a pH between 2 and 10. They include Minette Inox, Major Inox, Master Inox, Salvador Inox, Senior Inox and Sandy Inox. |
Why Grindex?
- Four submersible families — drainage, sludge, abrasive slurries and stainless steel — chosen by the pumped medium, not by the connection diameter
- Built-in motor protection and air valve — the pump can run unattended and can run briefly without water
- Bravo 200–900 series for abrasive slurries with solids up to 50 mm — for coal, ore and dredging
- Inox version for pH between 2 and 10 — drainage and sludge pumps for corrosive fluids
- Maxi H-Lite, 25 kW, between Matador and Maxi — a more compact pump for heavy drainage where access is tight
Which Grindex codes and series are requested most often?
| Code | Description |
|---|---|
| Minor 8103 | Submersible drainage pump |
| Major 8104 | Submersible drainage pump |
| Master 8105 | Submersible drainage pump |
| Matador 8106 | Submersible drainage pump, 18 kW |
| Maxi 8107 | Submersible drainage pump, 37 kW |
| Maxi H-Lite | Submersible drainage pump, 25 kW, between Matador and Maxi |
| Salvador 8109 | Submersible sludge pump |
| Senior 8110 | Submersible sludge pump |
| Sandy 8111 | Submersible sludge pump |
| Bravo 200 – Bravo 900 | Submersible pumps for abrasive slurries, articles 8146–8153 |
| Major Inox 8116 | Stainless steel drainage pump |
| Sandy Inox 8120 | Stainless steel sludge pump |
Where is Grindex equipment used?
- Construction — drainage of contaminated water
- Mining industry — pumps for sludge and for abrasive coal and ore slurries
- Dredging — Bravo pumps for abrasive slurries and bentonite mud
- Heavy industry — dewatering and sludge pumps for industrial installations
- Processes with corrosive fluids — Inox pumps for drainage and sludge with a pH between 2 and 10
How do we supply Grindex in Romania?
For Grindex we can quote submersible drainage pumps, sludge pumps and pumps for abrasive slurries, Inox versions, as well as spare parts for pumps in service. Send the series and article number from the nameplate, the motor voltage and power, the head, the flow rate wanted and a description of the medium, with the particle size of the solids and the pH. When replacing an old pump, a photo of the nameplate helps a lot. Pumps are brought in to order, through EU supply channels, usually 1–4 weeks, and parts can ship in 24–72 h when the item is in stock, locally or at the supplier. The exact lead time is confirmed in the quotation.
For pumps in the Inox version we check in the quotation the compatibility of the materials with the pumped fluid, based on the composition and pH provided.
Frequently asked questions about Grindex
What types of pumps does Grindex make?
Grindex makes electric submersible pumps in four families: drainage (solids up to 12 mm), sludge (up to 80 mm), Bravo for abrasive slurries (up to 50 mm) and Inox stainless steel, for fluids with a pH between 2 and 10.
How do I choose between a drainage pump and a sludge pump?
The particle size of the solids and the density of the mixture matter. Drainage pumps pass solids up to 12 mm and contaminated water, while sludge pumps, such as Sandy or Senior, go up to 80 mm. Send us the description of the medium and the head.
Can you supply Grindex pumps in Romania and how fast?
Yes. We bring in Grindex pumps to order, through EU supply channels, usually in 1–4 weeks. Spare parts can ship in 24–72 h when the item is in stock, locally or at the supplier. For large series, such as Bravo 600–900, the lead time may be longer; we state it in the quotation.
Can I replace an old Minor or Major pump with a current one?
Usually it can be done, but in the quotation we check the discharge connection, the voltage and the cable length. We need the series and number on the nameplate of the existing pump. Series with a known article number, such as 8103 for Minor, are identified faster.
What do I need to specify to get a quotation for a Bravo pump for abrasive slurries?
The size or flow rate wanted, the head, the available voltage, the nature of the solids with the maximum particle size and the concentration of the mixture. Bravo is made for abrasive slurries with solids up to 50 mm, so the type of material helps us choose the impeller variant.
How do I request a Grindex quotation?
Send the Grindex code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 20 November 2026 · Sources: Grindex AB (manufacturer documentation)

