FRAKO supplier in Romania
Reactive power compensation, active and passive filters, PQA analysers
Founded in 1928 · Headquarters: Teningen, Germany
Who is FRAKO and what does it make?
FRAKO was founded in 1928 in Frankfurt, under the name Frankfurter Kondensatorenfabrik, and today has its registered office in Teningen, Germany. The company is privately owned and specialises in reactive power compensation, power quality and energy management. In 1975 it launched an electronic reactive power controller, in 1992 an energy management system, and in 1998 dynamic compensation systems with thyristor switching.
The usefulness of the range shows in an industrial installation with heavy loads: a low power factor brings penalties and loads the transformer, and harmonics damage the capacitors. The compensation systems in a sheet-metal cabinet cover from 17.5 to 500 kvar per cabinet, with a self-adapting controller and LKT capacitors in dry technology; the versions with detuning reactors (LSFC-P series) are designed for networks with harmonics according to DIN EN 61000-2-4 class 2. The LSFC-E series switches the capacitors electronically at zero crossing, between 100 and 300 kvar, for loads with rapid variations. Active filters compensate harmonics up to the 49th order, from 25 to 375 A per unit, and passive filters cover 100–400 A. These are joined by the PQA analysers and the EM-MC maximum demand controller.
The relevant networks are the low-voltage networks of large consumers, factories and installations with their own sources. For an existing installation, the LSFC, LSI or PQA designation on the panel identifies the series.
What do we supply from the FRAKO range?
| Product | Description |
|---|---|
| LSFC-P compensation systems | Automatic compensation cabinets with detuning reactors, for low-voltage networks with a high harmonic content, in a sheet-metal enclosure, wall or floor mounted. |
| LSFC-E | Dynamic systems with electronic switching of the capacitor steps at zero crossing, between 100 and 300 kvar, controlled by the PFC-12TR-1 controller. |
| Active harmonic filters | Cabinets or wall-mounted units for three-phase low-voltage networks, with or without neutral: they compensate harmonics up to the 49th order, regulate reactive power and balance the load. |
| PQA 1101 / 1500 / 2300 | Measuring and monitoring instruments for power quality in three-phase low-voltage networks from 115 V to 690 V; PQA 2300 is designed as an incoming power quality check. |
Why FRAKO?
- Compensation systems from 17.5 to 500 kvar per cabinet — pre-assembled, ready to connect, with a self-adapting controller and LKT capacitors with four safety levels
- LSFC-P for networks with harmonics — central compensation with detuning reactors, according to DIN EN 61000-2-4 class 2
- LSFC-E with electronic zero-crossing switching — without wear and without disturbances, for loads with strong starting or networks with low short-circuit power
- Active filters up to the 49th harmonic — 25–375 A per unit, with reactive power correction and load balancing
- Controllers with a patented characteristic — cos φ target without overcompensation at low load and detection of power fed into the network
Which FRAKO codes and series are requested most often?
| Code | Description |
|---|---|
| LSFC-P | Compensation system with detuning reactors, for harmonics |
| LSFC-E | Dynamic system with thyristor switching, 100–300 kvar |
| LSI | Inductive compensation system |
| LKT | Power capacitor in dry technology |
| LKT-F | Capacitor series for power electronics |
| PFC-12TR-1 | Dynamic reactive power controller |
| PQA-C | Intelligent controller for passive filters |
| PQA 1101 | Measuring and monitoring instrument, 115–690 V |
| PQA 1500 | Measuring and monitoring instrument |
| PQA 2300 | Power quality analyser for incoming checks |
| PQM 1588 | Power Quality Manager, with OPC UA interface |
| EM-MC 2200 | Maximum demand controller (Maximum Controller) |
Where is FRAKO equipment used?
- Manufacturing industry — reactive power compensation for motors and transformers
- Networks with converters and drives — active and passive filters for harmonics
- Solar parks — compensation at the connection point
- Installations with their own generators — compensation and protection of capacitors
- Industrial and commercial buildings — reducing power peaks through EM-MC
How do we supply FRAKO in Romania?
We quote FRAKO compensation systems, active and passive filters, capacitors, controllers and PQA analysers, as well as spare parts for existing installations. The equipment is supplied to order, usually in 1–4 weeks; cabinets configured for the application can take longer. For an accurate quotation we need the installation power, the voltage, the measured and the target power factor, the harmonic level (current or voltage) and the type of loads, whether there are rapid variations and whether there is an on-site generator. For parts, send the series name (LSFC, LSI, LKT) from the panel. Capacitors or controllers can ship in 24–72 h when the item is in stock, locally or at the supplier; the final lead time appears in the quotation.
Correct compensation is sized from measurements of the load and the harmonics in your installation.
Frequently asked questions about FRAKO
What products does FRAKO make?
Reactive power compensation systems (LSFC, LSI), power capacitors (LKT), active and passive harmonic filters, reactive power controllers, PQA analysers and energy management systems. The company has existed since 1928 and is based in Teningen.
How do I choose between standard compensation, one with detuning reactors and a dynamic one?
Without harmonics and with slow variations, standard compensation; with harmonics, LSFC-P with detuning reactors; with loads that start suddenly or a weak network, dynamic LSFC-E. A set of measurements from the installation settles the version.
Can you supply FRAKO equipment in Romania, and in what time?
Yes, to order. FRAKO components and instruments are supplied to order, usually in 1–4 weeks; capacitors or controllers can ship in 24–72 h when the item is in stock, locally or at the supplier, and cabinets configured for a project need a longer lead time.
Can I replace a capacitor or a step in an older system?
Only after checking. Send the power in kvar, the rated voltage, the construction type and, if possible, a photo of the capacitor nameplate; we confirm the item before the quotation.
What do I send for a quotation on an active filter?
The rated current, the voltage, whether there is a neutral conductor, the measured harmonics and the type of consumers (drives, rectifiers, lighting), plus the space available and the mounting method (floor or wall).
How do I request a FRAKO quotation?
Send the FRAKO code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: FRAKO (manufacturer documentation)

