Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Hänchen supplier in Romania

For Hänchen we quote standard cylinders from the 120 and 300 series, standardised cylinders 250 and 550, 320 test cylinders, servo cylinders and Ratio-Clamp locking units; we need the series, stroke, piston diameter and seal version.

Headquarters: Ostfildern, Germany

Request a quote

Who is Hänchen and what does it make?

Hänchen, from Ostfildern, Germany, builds hydraulic cylinders for plants and machines where motion precision and service life matter. The range covers standard cylinders from the 120 and 300 series, standardised cylinders from the 250 and 550 series, servo cylinders fitted with valves and transducers, 320 series test cylinders and special cylinders designed to the requirements of the application.

The 250 and 550 series follow the mounting dimensions of DIN 24336 or DIN ISO 6020/6022, so an existing cylinder can be replaced once the mounting dimensions have been checked. The 320 series is designed as a hydropulser with an integrated stroke measuring system, for test rigs with high speeds, frequencies and accelerations. Seals and guides are chosen from several versions: Servocop, Servoseal, Servofloat, the Servoslide plastic guide, the Servobear hydrostatic bearing or a metallic guide, with speed limits between 0.5 and 4 m/s, depending on the combination chosen.

Beyond cylinders, the range includes the Ratio-Clamp® locking unit, which holds clamping or holding force without energy, pressure intensifiers and pressure reducers, media separators, control blocks and vibration dampers. Hänchen products are used in foundries and die-casting plants, in test rigs, in rolling mills and in wind turbine blade pitch control. For a quotation, send the series, stroke and piston diameter.

What do we supply from the Hänchen range?

ProductDescription
Standard cylinders, 120 and 300 seriesHydraulic cylinders of compact construction with a small installation space, supplied as one-offs or in series. Sealing and guiding are chosen from the Servocop, Servoseal, Servofloat, Servoslide and Servobear versions.
Standardised cylinders, 250 and 550 seriesCylinders with mounting dimensions conforming to DIN 24336 or DIN ISO 6020/6022, for replacing existing units on production machines, once the mountings and stroke have been checked.
320 test cylinders and servo cylindersThe 320 series is a hydropulser with an integrated stroke measuring system, for test rigs. Servo cylinders come with valves and sensors, for example force and displacement transducers, for precise dynamic actuation.
Ratio-Clamp and hydraulic componentsThe Ratio-Clamp® locking unit holds the load without energy, even after the hydraulic system has stopped. The range also includes pressure intensifiers and pressure reducers, media separators, control blocks and vibration dampers.

Why Hänchen?

  • The 250 and 550 series follow DIN 24336 or DIN ISO 6020/6022 — an existing cylinder is replaced once the mounting dimensions have been checked
  • The 320 series has an integrated stroke measuring system — suited to dynamic test rigs
  • Speed limits between 0.5 and 4 m/s, depending on seal and guide — the version is chosen according to the real operating regime
  • Servoslide plastic guide or Servobear hydrostatic bearing — the guide is chosen according to the friction and wear allowed in the application
  • Special cylinders designed on request — used when standard dimensions do not fit in the machine

Which Hänchen codes and series are requested most often?

CodeDescription
120Compact standard cylinder series
300Compact standard cylinder series
250Standardised cylinders, DIN 24336 or DIN ISO 6020/6022 dimensions
550Standardised cylinders, DIN 24336 or DIN ISO 6020/6022 dimensions
320Test cylinders (hydropulser) with integrated stroke measurement
ServocopSealing version
ServosealSealing version
ServofloatSealing version
ServoslidePlastic guide
ServobearGuide with hydrostatic bearing
Ratio-ClampLocking unit for holding the load without energy

Where is Hänchen equipment used?

  • Foundries and die casting — cylinders for low-pressure and die-casting plants
  • Test rigs — vibration rigs, end-of-line rigs, rigs for seals and for large bearings
  • Rolling mills — Ratio-Clamp locking units for holding the load
  • Shipbuilding — hydraulic cylinders for special applications
  • Wind energy — turbine blade angle control

How do we supply Hänchen in Romania?

We can quote Hänchen cylinders from the standard, standardised and test series, as well as Ratio-Clamp units. For an accurate quotation we need the series from the nameplate, the stroke, the piston and rod diameter, the working pressure and the mounting type; for servo cylinders, add the fitted sensors. If you are replacing an existing cylinder, send a photo of the nameplate and the mounting dimensions. Items are supplied to order, usually in 1–4 weeks; for special versions the lead time may be longer. The exact lead time is stated in the quotation.

Special sealing, guiding and stroke measuring versions are defined once we receive the drawing or the nameplate of the current cylinder, and compatibility is confirmed in the quotation.

Frequently asked questions about Hänchen

What does Hänchen make?

Hänchen makes standard hydraulic cylinders (120 and 300 series), standardised cylinders (250 and 550), servo cylinders, test cylinders (320) and special cylinders. The range also includes the Ratio-Clamp® locking unit, pressure intensifiers and pressure reducers, media separators and control blocks. The company is based in Ostfildern, Germany.

How do I choose between the 250 series and the 550 series?

The choice depends on pressure, stroke, piston diameter and mounting type; both series are standardised, with mounting dimensions to DIN 24336 or DIN ISO 6020/6022, so they suit replacing cylinders from other makers. Send the nameplate data and we confirm in the quotation which series fits.

Do you supply Hänchen cylinders in Romania and how fast?

Cylinders are supplied to order in Romania, usually in 1–4 weeks, and can ship in 24–72 h when the item is in stock, locally or at the supplier. Special versions, with servo valves or sensors, may take longer, and the exact lead time is confirmed in the quotation.

Can I replace an old cylinder with a Hänchen series?

Yes, as a rule, once the mounting dimensions, stroke, rod diameter and working pressure have been checked. On the 250 and 550 series the mounting dimensions follow DIN 24336 or DIN ISO 6020/6022. Send the drawing or a photo of the nameplate and we reply with the suitable version.

What data do you need for a quotation on a test cylinder or a servo cylinder?

Send the series from the nameplate, the stroke, the piston and rod diameter, the working pressure, the maximum speed and the operating frequency. For servo cylinders add the valve and transducer type, for example force or displacement, and for the 320 series the stroke measuring system.

How do I request a Hänchen quotation?

Send the Hänchen code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Herbert Hänchen GmbH (manufacturer documentation)