Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Hydac supplier in Romania

Smart fluid and hydraulic technology

Founded in 1963 · Headquarters: Sulzbach/Saar, Germany

Request a quote

Who is Hydac and what does it make?

Hydac is a specialist in hydraulics and fluid electronics - from hydraulic accumulators and oil coolers to filters, pressure sensors and condition monitoring systems. It develops complete solutions for industrial and mobile hydraulic systems, from individual components to integrated subsystems with full automation.

The Hydac hydraulic accumulator is a widely used standard for energy storage in hydraulic systems. The manufacturer's diaphragm or piston technology allows oil under pressure to be stored and released quickly - used for shock absorption, pump pulsation damping and emergency energy in case of supply failure. The range includes bladder, piston, diaphragm and metal bellows accumulators; volumes and pressures depend on the series (for example, the SB330 bladder series is for pressures up to 330 bar), and the nitrogen pre-charge is set for each application.

Hydac invests constantly in smart sensors and industrial IoT. The pressure, temperature, level and flow sensors in the range communicate directly with PLCs or cloud systems for predictive monitoring - detecting oil degradation before it affects components, measuring pump vibrations for bearing diagnostics, and monitoring cylinder pressures for process optimisation, reducing downtime through predictive rather than preventive maintenance.

What do we supply from the Hydac range?

ProductDescription
SB/SBO Hydraulic AccumulatorsEnergy storage in hydraulic systems by compressing nitrogen. Elastomer bladder design, in NBR, ECO, IIR or FKM, depending on fluid and temperature. Volumes and working pressures depend on the series (for example, the SB330 series works up to 330 bar, and the SB690 series at 690 bar and above). Nitrogen pre-charge calculated for each application (typically 90% of the minimum system pressure). Integrated safety valves, SAE/BSPP/metric connections. Functions: 1) Hydraulic shock absorption - eliminates pressure spikes when cylinders stop abruptly, protects valves and pumps. 2) Pulsation damping - smooths the flow from piston pumps, reduces noise and vibration. 3) Emergency energy - maintains pressure for critical operations if the pumps fail (braking, valve closing). 4) Volume compensation - absorbs volume variations as the oil heats up. Applications: hydraulic presses (shock absorption), mobile machinery (cab suspension, braking), wind turbines (pitch control).
OK-EL Hydraulic Oil CoolersAir-oil heat exchangers for dissipating the heat generated in hydraulic systems. Design: aluminium tube with cooling fins, oil flowing inside the tubes, ambient air forced by an axial or radial fan. Heat dissipation capacity depends on the model and on the oil-air temperature difference. Control: an electronic thermostat regulates the fan speed (inverter) or ON/OFF switching to hold the setpoint temperature ±2°C. Protection: dust filter for the fins, visual/electric clogging indicator, bypass valve for cold starts (viscous oil). Maximum oil temperature and working pressure depend on the model. Applications: stationary hydraulic power units (workshops, factories), mobile machinery (excavators, cranes - 24VDC variants), machine tools (presses, injection moulding).
HDA Pressure SensorsPressure measurement in hydraulic and pneumatic systems. Principle: the measuring element is a metal diaphragm (stainless steel) that deforms in proportion to the applied pressure. The deformation is converted into an electrical signal by: 1) resistive ceramic (thick film) for standard industrial applications, 2) thin-film on stainless steel for higher accuracy and functional safety, according to the manufacturer's documentation. Measuring ranges, accuracy, outputs, protection rating and certifications (ATEX, SIL) depend on the model and are confirmed from the Hydac datasheet. Applications: cylinder pressure control, pump monitoring, overpressure protection, logging for diagnostics.

Why Hydac?

  • Complete hydraulic expertise - Hydac designs integrated systems (pump + cooling + filtration + accumulation + control)
  • Accumulator range - bladder, piston, diaphragm and metal bellows, with nitrogen pre-charge; accessories (for example safety blocks) are selected separately
  • Air-oil coolers - standard range, modular systems (AC-MS) and solutions for mobile machinery
  • Pressure sensors - transmitters and pressure switches; measuring ranges, accuracy and certifications (ATEX, SIL) depend on the model and are confirmed from the datasheet
  • Online monitoring - CMU (Condition Monitoring Unit) systems with predictive alarms and cloud connectivity
  • Global service - oil analysis in an in-house laboratory, technical training, commissioning support

Which Hydac codes and series are requested most often?

CodeDescription
HDA 4000electronic pressure transducer for hydraulics
HDA 4700pressure transducer for industrial and mobile hydraulics, measuring ranges 2.5–2000 bar, with Ex variants for explosive atmospheres
HDA 4000-HCvariant of the HDA 4000 transducer; differences are confirmed from the datasheet
HDA 4000-Hvariant of the HDA 4000 transducer; differences are confirmed from the datasheet
SB330-1A1/112U-330Ahydraulic bladder accumulator, specific configuration
SB330-32F1/112U-210Chydraulic bladder accumulator, large-volume variant
SB330-10F1/112U-210Chydraulic bladder accumulator, compact variant
EDS 4000electronic pressure switch for monitoring hydraulic pressure
EDS 410OEM-type electronic pressure switch for integration into equipment
HPG 3000programming device for EDS 4000 electronic pressure switches
OK-ELDoil cooler with electric fan
CS 1500sensor for monitoring solid contamination in oil

Hydac series with English pages

Where is Hydac equipment used?

  • Mobile hydraulics - excavators, bulldozers, cranes, tractors, harvesters
  • Machine tools - hydraulic presses, plastic injection, forging, rolling mills
  • Metallurgy - rolling mills, foundries, casting machines, manipulators
  • Energy - hydro turbines, wind turbines (pitch control), photovoltaics (tracking)
  • Oil & gas - BOPs (Blow Out Preventers), offshore platforms, drilling rigs
  • Marine - steering systems, stabilisation, winches, ro-ro ramps
  • Aerospace - flight simulators, engine test stands, actuation systems
  • Material handling - forklifts, reach stackers, lifting systems
  • Renewable energy - wind turbines, wave energy, hydro power
  • Test benches - load simulation, endurance tests, component validation

How do we supply Hydac in Romania?

We select Hydac hydraulic components (accumulators, coolers, pressure sensors) according to the pressure and volume of your application and supply them to order. Standard items in stock, locally or at the supplier, can be delivered in 24–72 h; accumulators and sensors with particular specifications usually arrive in 1–4 weeks, to order. Availability, price and lead time are checked on each request and stated in the quotation, including for rarely requested variants. For a correct quotation, send the working pressure, the required volume (for accumulators) or the measuring range (for sensors) and the connection type.

The stock of each Hydac accumulator or sensor variant is checked before the quotation; warranty service remains with the manufacturer.

Frequently asked questions about Hydac

What is the difference between the Hydac HDA 4000 and HDA 4700 transducers?

The HDA 4000 is the standard electronic pressure transducer for ordinary hydraulic applications, while the HDA 4700 has a thin-film sensor on a stainless steel diaphragm, typical accuracy of ±0.25 % and measuring ranges from 2.5 to 2000 bar; for explosive atmospheres, the HDA 4700 is also available in Ex variants, according to the manufacturer's documentation.

How do I choose the right hydraulic accumulator from the Hydac SB330 series?

Choosing an accumulator from the SB330 series depends on the required volume, the working pressure of the system and the type of mounting connection, information coded directly in the designation, for example SB330-32F1/112U-210C indicates a larger volume than the SB330-10F1/112U-210C variant; exact verification is done with the datasheet of the model.

What is the difference between Hydac bladder, piston, diaphragm and metal bellows hydraulic accumulators?

They differ in construction and field of use. The bladder accumulator reacts quickly and separates gas from fluid well; the piston type offers large volumes and high pressure ratios; the diaphragm type has a compact construction and low weight; the metal bellows type needs no maintenance, has no permeation and is intended for extreme temperatures.

What is the role of an electronic pressure switch such as the EDS 4000?

The EDS 4000 continuously monitors the pressure in a hydraulic circuit and sends a switching or analogue signal to the control system when the pressure rises above or falls below a set threshold, which is useful for pump protection, signalling clogged filters or controlling work cycles.

How do I request a Hydac quotation?

Send the Hydac code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Hydac, HYDAC International GmbH (manufacturer documentation)