HEICO supplier in Romania
For HEICO we quote HEICO-LOCK wedge-lock washers and wedge-lock nuts, HLK washers and HEICO-TEC tension nuts, based on the thread diameter, the bolt class and the working conditions of the joint.
Headquarters: Ense-Höingen, Germany
Who is HEICO and what does it make?
HEICO is a German manufacturer of locking and tightening elements for bolted joints, headquartered in Ense-Höingen. The range has two lines: HEICO-LOCK, with wedge-lock washers and nuts, and HEICO-TEC, with tension nuts and bolts. For a maintenance engineer in heavy or power industry, securing a joint subject to vibration and shock is a recurring problem, and a nut that works loose can stop a plant.
The HEICO-LOCK principle is based on a pair of washers with wedge-shaped cams on the inner faces and radial teeth on the outer ones. When the bolt is tightened, the outer teeth bite into the contact surfaces, and under dynamic loads movement occurs only between the inner wedge faces, which locks the bolt and increases the clamping force. The locking relies on preload, not on friction. Wedge-lock washers exist from M3 to M76 and from 1/4 to 3 inches, in steel or stainless steel, with a narrow or wide bearing surface, for class 8.8, 10.9 and 12.9 bolts and nuts. Wedge-lock nuts, in a single piece, are from M6 to M27, strength class 10, and the wheel versions have a fine thread from M14×1.5 to M24×1.5. The range also includes ring washers, reaction washers, HLK washers for steel construction and combined washers.
HEICO-TEC is the tension nut: several pressure bolts push pins onto the tensioned part and elongate the bolt without hydraulic tools, using only a torque wrench. Strength classes 8 and 10 comply with ISO 898-2. For a quotation, the thread diameter, the bolt class and the working conditions matter.
What do we supply from the HEICO range?
| Product | Description |
|---|---|
| HEICO-LOCK wedge-lock washers | Pre-assembled pair of washers with wedge-shaped cams and radial teeth, from M3 to M76 and from 1/4 to 3 inches, in steel or stainless steel, with a narrow or wide bearing surface. They are designed for low and high preloads, are reusable and suited to dynamic loads. |
| Wedge-lock nuts and wheel nuts | The HEICO-LOCK wedge-lock nut is a single piece that turns together with the wedge-lock washer. It is made from M6 to M27, in strength class 10, and the wheel version has a fine thread from M14×1.5 to M24×1.5. It is used in railways, power and construction machinery. |
| Ring, reaction, HLK and combined washers | Ring washers, reaction washers, HLK washers for steel construction and combined washers complete the locking range. The choice depends on the bolt size, its class, the type of joint and the available bearing surface, and the exact code is confirmed on the joint drawing. |
| HEICO-TEC tension nuts and bolts | Tension nuts according to ISO 898-2 in classes 8 and 10, which directly replace hexagon nuts of the same class. Several pressure bolts elongate the bolt with a torque wrench, without electric, hydraulic or pneumatic tools. |
Why HEICO?
- Locking by preload, not by friction — HEICO-LOCK wedge-lock washers lock under dynamic loads and are reusable
- Wide size range — wedge-lock washers from M3 to M76 and from 1/4 to 3 inches, in steel or stainless steel, for 8.8, 10.9 and 12.9 bolts
- Single-piece wedge-lock nuts — M6–M27 in class 10, plus wheel nuts with fine thread M14×1.5 – M24×1.5
- HEICO-TEC tension nuts — tightening without hydraulic tools, only with a torque wrench, in classes 8 and 10 according to ISO 898-2
- Products for steel construction — HLK washers, reaction washers and combined washers in the same family
Which HEICO codes and series are requested most often?
| Code | Description |
|---|---|
| Wedge Lock Washers | Wedge-lock washers, M3–M76 and 1/4–3 inches |
| Ring Lock Washers | Ring locking washers |
| Reaction Washers | Reaction washers |
| Wedge Lock Nuts | Single-piece wedge-lock nuts, M6–M27, class 10 |
| Wheel Nuts | Wheel nuts with fine thread M14×1.5 – M24×1.5 |
| HLK-Washers | Locking washers for steel construction |
| Combi-Washers | Combined washers |
| Tension Nut | Tension nut according to ISO 898-2, classes 8 and 10 |
| Tension Nut, special sizes | Tension nuts in special sizes |
| Compact Series | HEICO-TEC compact series |
| Reaction Nuts | HEICO-TEC reaction nuts |
| Tension Bolt | HEICO-TEC tension bolt |
| Expansion Bolt | HEICO-TEC expansion bolt |
Where is HEICO equipment used?
- Railways — wheel nuts and wedge-lock washers for joints subject to vibration
- Energy and power generation — joints with tension nuts and wedge-lock washers
- Construction machinery — wedge-lock nuts on frames and dynamically loaded assemblies
- Steel and heavy industry — HEICO-TEC tension nuts
- Steel construction — HLK washers for steel joints
How do we supply HEICO in Romania?
We can quote HEICO-LOCK wedge-lock washers and nuts and HEICO-TEC tension nuts, supplied to order. The lead time is usually 1–4 weeks and, depending on the specification, can be longer for special sizes or materials on request. For a correct quotation, send us the thread diameter (metric or in inches), the bolt class (8.8, 10.9 or 12.9), the material (steel or stainless steel), the type of bearing surface, the quantity and the working conditions, such as vibration, temperature or corrosive environments.
The washer or nut is determined on the basis of the thread diameter, the bolt class and the working conditions, and special sizes or materials on request are confirmed separately.
Frequently asked questions about HEICO
What does HEICO make?
HEICO makes locking and tightening elements for bolted joints: wedge-lock washers and nuts (HEICO-LOCK), ring, reaction and combined washers, and tension nuts and bolts (HEICO-TEC). The head office is in Ense-Höingen, Germany.
How does a wedge-lock washer work?
The pair of washers has wedge-shaped cams on the inside and radial teeth on the outside. When tightened, the teeth bite into the surfaces, and under vibration movement occurs only between the wedge faces, which locks the bolt and increases the clamping force. The locking relies on preload, not on friction.
Do you supply HEICO products in Romania and within what lead time?
Yes, to order; usually 1–4 weeks. Special sizes or materials on request can extend the lead time, depending on the specification. You receive the exact lead time in the quotation, once we know the thread and the class.
Can I replace a hexagon nut with a HEICO-TEC tension nut?
Tension nuts in classes 8 and 10 directly replace hexagon nuts of the same class, but the thread diameter and the available space matter. A replacement is confirmed only after comparison; send the bolt size, the class and a description of the joint.
What do I send for a quotation for wedge-lock washers?
State the bolt diameter (metric or in inches), the class (8.8, 10.9 or 12.9), the material (steel or stainless steel), the bearing surface wanted (narrow or wide), the quantity and the working environment. For wedge-lock nuts, add whether you need a wheel version, with fine thread.
How do I request a HEICO quotation?
Send the HEICO code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: HEICO (manufacturer documentation)

