Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

IMO supplier in Romania

Slewing rings and rotary drive systems

Founded in 1988 · Headquarters: Gremsdorf, Germany

Request a quote

Who is IMO and what does it make?

IMO is a German manufacturer from Gremsdorf, founded in 1988, specialised in slewing rings and slew drives — complete ready-to-mount units for the controlled rotation of a structure. The slewing rings cover diameters from 100 to 6000 mm, in ball, roller or combined ball-roller versions, with an option of external, internal or no gearing. For customers in Romania we can quote both individual slewing rings and complete slew drives for positioning applications.

What sets IMO apart is a slew drive range organised on two drive principles: the WD series, with worm gear for a high transmission ratio and low speeds (1-3 rpm), available in WD-L, WD-H and WD-E Alu Line versions, and the SP series, with pinion gearing for higher speeds, in SP-I and SP-H versions. The overturning moments covered go from a few kNm for the small versions up to over 1500 kNm for the SP-H open solution series. The company offers both catalogue products and slewing rings designed to order for special applications.

For positioning equipment in Romania — solar tracking systems, small cranes, rotating platforms or forestry equipment — IMO makes sense where rotation must be precisely controlled, with a known overturning moment, and not merely mechanically supported.

What do we supply from the IMO range?

ProductDescription
Ball Slewing RingsBall slewing rings with a ball diameter of 12 to 80 mm, in single-row or double-row configuration and four-point contact raceway geometry, for combined axial and radial loads. Typical application: rotating platforms and medium-sized handling equipment.
Roller Slewing RingsRoller bearings with a roller diameter of 10 to 100 mm, in single-row, double-row or triple-row configuration.
WD Series Slew Drives (Worm Gear)Slew drives with worm gear for a high transmission ratio and low speeds of 1-3 rpm, with raceway diameters from 156 to 725 mm and overturning moments of up to over 1000 kNm, depending on the version.
SP Series Slew Drives (Pinion)Slew drives with pinion gearing for higher speeds than the WD series, with raceway diameters from 229 to over 1400 mm and overturning moments of up to over 1500 kNm for the open solution version.

Why IMO?

  • Very wide range of diameters — from 100 mm to 6000 mm, covering small applications and large industrial installations
  • Ready-to-mount slew drives — WD series for low speeds, SP series for higher speeds
  • Three types of slewing rings — ball, roller or combined, depending on the type of load
  • Flexible gearing options — external, internal or no gearing, for simple integration into the customer's system
  • Dedicated renewable energy line — slewing rings for onshore and offshore wind turbines

Which IMO codes and series are requested most often?

CodeDescription
WD-LWorm gear slew drive, diameter 156-713 mm
WD-HWorm gear slew drive, high overturning moment
WD-E Alu LineCompact aluminium slew drive, diameter 343 mm
SP-IPinion slew drive, diameter 229-1091 mm
SP-HPinion slew drive, diameter 455-955 mm
SP-H open solutionPinion slew drive, very high overturning moment
Ball Slewing RingsBall slewing ring, ball diameter 12-80 mm
Roller Slewing RingsRoller slewing ring, roller diameter 10-100 mm
Combined Ball-Roller Slewing RingsCombined ball-roller slewing ring, designed for dominant axial force and low radial loads or moments
Wind Turbine Slewing RingsSeries of slewing rings for wind turbines

Where is IMO equipment used?

  • Wind energy — slewing rings for onshore and offshore turbines
  • Construction and cranes — slew drives for rotary positioning
  • Mining — slewing rings for heavy equipment
  • Marine and naval equipment — bearings for rotating deck installations
  • Automation and medical — precision slew drives for specialised equipment

How do we supply IMO in Romania?

Availability and lead time are confirmed in the quotation; we work from the specifications published by the manufacturer for each series. We bring in IMO components to order, typically in 1–4 weeks, depending on the diameter and configuration. For an accurate quotation we need the raceway diameter, the type of gearing required (external, internal or no gearing) and the estimated overturning moment or axial/radial load. Availability of each version is established individually — special configurations are confirmed case by case before the final lead time.

The parameters of a slewing ring designed to order are established from the complete specifications of the application, sent by the customer.

Frequently asked questions about IMO

What product range does IMO have?

IMO makes slewing rings with balls, rollers or combined, plus complete ready-to-mount slew drives, for applications that need controlled rotation — wind energy, cranes, construction and naval equipment.

How do I choose an IMO slew drive by series?

You need to establish the speed required and the overturning moment of the application: the WD series, with worm gear, suits low speeds and a high ratio, while the SP series, with pinion, suits higher speeds.

What is the IMO equivalent for slewing rings of other manufacturers?

IMO covers diameters from 100 to 6000 mm with ball, roller or combined versions; equivalence with other makes is established from the raceway diameter, the type of gearing and the overturning moment, not from the series name.

Do you supply IMO products in Romania, and in what time?

Yes, to order, typically in 1–4 weeks, depending on the diameter, the type of gearing and the configuration confirmed by the manufacturer.

What data do you need for an IMO quotation?

The raceway diameter required, the type of gearing wanted (external, internal or no gearing), the overturning moment or estimated load and the working speed of the final application.

How do I request a IMO quotation?

Send the IMO code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: IMO Holding GmbH (manufacturer documentation)