Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Hoenle Adhesives supplier in Romania

For Hoenle Adhesives we quote Vitralit CIPG 60200 and 60201 liquid gaskets, Vitralit 5140 UV adhesive, Structalit 8205 underfill and UV-LED lamps; we need the adhesive name, the bonded materials and the UV source.

Request a quote

Who is Hoenle Adhesives and what does it make?

Hoenle Adhesives makes industrial adhesives and the matching ultraviolet curing equipment: UV adhesives, structural and conductive adhesives, formed-in-place gasket materials, UV and UV-LED lamps and fluorescence inspection devices. The adhesives and lamps are developed together, so that the wavelength and intensity match the formulation. For a quotation, send us the adhesive name (for example Vitralit CIPG 60200), the bonded materials, the layer thickness and the UV source you use.

Liquid gaskets are suited to 3D geometries that are hard to seal with conventional gaskets, die-cut parts or tapes. Unlike silicones, adhesives used as gaskets cure much faster and can bond and seal the parts in the same operation. In the CIPG process (cured-in-place gasket), the bead is applied to the housing and cured before the cover is fitted; on disassembly it stays on the housing base, and the housing can be closed again or the bead can be removed without residue. They are used in electronic control units, cameras, sensors, on-board chargers and battery disconnect units, with products such as Vitralit CIPG 60200, Vitralit CIPG 60201 and Vitralit 5140.

The range also includes the masking material Vitralit MASK E-20131, which cures with UV or visible light and contains no CMR substances, and the underfill material Structalit 8205 for electronic boards. For curing there are conventional UV lamps, UV-LED equipment such as LED Spot 200 and the bluepoint LED spot system, as well as surface treatment systems: UV in an inert nitrogen atmosphere, excimer and hybrid UV/UV-LED systems, used in printing, film processing, electronics and coatings.

What do we supply from the Hoenle Adhesives range?

ProductDescription
Vitralit CIPG – cured-in-place gasketsUV-curing elastic adhesives, applied to the housing as a liquid gasket: Vitralit CIPG 60200, Vitralit CIPG 60201 and Vitralit 5140, for electronic control units, cameras, sensors, on-board chargers and battery disconnect units.
Vitralit MASK E-20131Masking material that cures with UV or visible light, without CMR substances, for the temporary protection of areas that must not be coated or treated in demanding processes. It is applied before coating or treatment and removed after the process.
Structalit 8205 – underfillUnderfill material for electronic boards, with mechanical stability, thermal performance and long-term reliability, for miniaturised electronic assemblies. It is applied to electronic boards between the components and the board, after soldering.
UV and UV-LED equipmentConventional UV lamps, UV-LED equipment such as LED Spot 200 and the bluepoint LED spot system, plus UV systems in an inert atmosphere, excimer and hybrid UV/UV-LED systems for surface treatment.

Why Hoenle Adhesives?

  • UV adhesives and lamps developed together — the wavelength and intensity match the formulation
  • CIPG gaskets that can be removed without residue — housings can be opened for repair and closed again
  • Faster curing than silicone sealing — bonding and sealing in the same operation
  • Vitralit MASK masking material without CMR substances — simple temporary protection during coating
  • Spot UV-LED systems and inert, excimer or hybrid surface systems — from bonding points to large surfaces

Which Hoenle Adhesives codes and series are requested most often?

CodeDescription
Vitralit CIPG 60200Cured-in-place liquid gasket, UV curing
Vitralit CIPG 60201Cured-in-place liquid gasket, UV curing
Vitralit 5140Elastic UV-curing adhesive, usable as a gasket
Vitralit MASK E-20131Masking material curing with UV or visible light, CMR-free
Structalit 8205Underfill for electronic boards
bluepoint LEDSpot UV-LED curing system
LED Spot 200Spot UV-LED source for curing
Inert UVUV curing systems in a nitrogen atmosphere
ExcimerExcimer systems for surface treatment
Hybrid UV / LED-UVSystems combining UV and UV-LED lamps

Where is Hoenle Adhesives equipment used?

  • Electronics — CIPG gaskets, underfill and bonding of components on boards
  • Electric vehicle components — sealing of charger and sensor housings
  • Optics and optoelectronics — active alignment bonding and UV curing
  • Printing and film processing — inert UV, excimer and hybrid systems
  • Industrial coatings — curing of varnishes and protective layers

How do we supply Hoenle Adhesives in Romania?

We can quote Vitralit and Structalit adhesives, masking materials and Hoenle UV and UV-LED curing equipment. For a quotation we need the adhesive name or, for a new application, the bonded materials, the required strength, the operating temperature, the layer thickness, the dispensing method and the existing UV source. Supplied to order, usually in 1–4 weeks; adhesives have a shelf life and storage conditions that are respected during transport, and large equipment can have, depending on the specification, a longer lead time. The exact lead time is confirmed in the quotation.

Full curing of a Vitralit adhesive with your lamp is determined on the basis of the wavelength and intensity of the UV source used.

Frequently asked questions about Hoenle Adhesives

What does Hoenle Adhesives make?

Hoenle Adhesives makes industrial adhesives – Vitralit UV adhesives, Structalit structural adhesives, conductive adhesives, CIPG liquid gaskets and masking materials – and the matching curing equipment: UV lamps, UV-LED equipment and surface treatment systems.

How do I choose a Vitralit adhesive for a CIPG gasket?

What matters is the housing material, the bead geometry, the operating temperature, the environment (dust, moisture, aggressive media) and whether the gasket must allow the housing to be opened for repair. Vitralit CIPG 60200 and 60201 are designed for this process; send us the housing drawing and the operating conditions.

How soon do we receive Hoenle adhesives or lamps?

Hoenle adhesives and lamps are supplied to order, usually in 1–4 weeks, respecting the storage conditions of the adhesives. An item can ship in 24–72 h when the item is in stock, locally or at the supplier; for large equipment, depending on the specification, the lead time can be longer.

Can I use Vitralit adhesives with the UV lamp I already have?

It depends on the wavelength and intensity of the lamp. Send us the lamp model or its spectrum, and we check whether the chosen adhesive cures fully or whether a suitable UV-LED source is needed, such as LED Spot 200 or bluepoint LED.

What do I send for a quotation for Hoenle adhesives?

The name of the adhesive used now or, for new applications, the bonded materials, the required strength, the operating temperature, the layer thickness, the dispensing method (manual or automatic), the monthly consumption and the available UV source. If you already use a Vitralit adhesive, its exact name is enough for a new quotation.

How do I request a Hoenle Adhesives quotation?

Send the Hoenle Adhesives code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Hoenle AG (manufacturer documentation)