HYTORC supplier in Romania
For HYTORC we quote MXT+, EDGE S, AVANTI and STEALTH hydraulic torque wrenches, LION GUN and LITHIUM SERIES II electric tools, stud tensioners and VECTOR or JETPRO pumps; for a quotation we need the torque required and the nut size.
Founded in 1968 · Headquarters: Mahwah, New Jersey, USA
Who is HYTORC and what does it make?
HYTORC is an American manufacturer of equipment for the controlled tightening of bolted joints, active since 1968 and based in Mahwah, in the state of New Jersey. The range starts with hydraulic torque wrenches and extends to electric and pneumatic tools, stud tensioners, hydraulic pumps, and special washers and nuts. The equipment is used where a flange or a large joint must be tightened to a precise, repeatable torque, without a hammer and with the reaction force taken up safely.
The hydraulic wrenches come in several series: MXT+ and MXT, EDGE S and VERSA for ordinary maintenance work, AVANTI with a very wide torque range (in the maximum-capacity model, over 130,000 ft-lb, or about 176,000 N·m), and STEALTH and XLCT for tight spaces. The LITHIUM SERIES II electric tools run on a 36 V battery up to 8,000 ft-lb (about 10,850 N·m), and the LION GUN at 18 V, up to 700 ft-lb, with data logging. The tensioners are made in surface, underwater and wind turbine versions, and the pumps are battery-powered, electric or pneumatic, including HY-EX with ATEX versions according to the manufacturer's documentation.
This kind of equipment is found at refineries, petrochemical plants, power plants, wind farms and pipeline commissioning work, as maintenance tools for flanges and large joints. For an accurate quotation, what matters is the torque required, the nut size, the space available around the joint and the energy source at the work site.
What do we supply from the HYTORC range?
| Product | Description |
|---|---|
| MXT+, MXT, EDGE S, VERSA hydraulic torque wrenches | Compared with the MXT model, MXT+ adds coaxial drive with reaction, automatic release and a cycle counter. EDGE S and VERSA have a simple construction, with three moving parts, for general maintenance where high torques and repeatable results are needed, without a special head. |
| AVANTI, STEALTH and XLCT | AVANTI covers a very wide torque range, with over 130,000 ft-lb in the maximum-capacity model. STEALTH is a hydraulic wrench for tight spaces, with a two-piston head, and XLCT is the low-clearance series made since 1992, with a red housing. |
| LITHIUM SERIES II and LION GUN electric tools | LITHIUM SERIES II runs at 36 V, up to 8,000 ft-lb, and LION GUN at 18 V, up to 700 ft-lb, with data logging. LION GUN Dual Speed switches from fast rotation to precise torque, and the 36 V LION GUN X reaches 3,000 ft-lb. |
| Tensioners and hydraulic pumps | Topside (standard and spring-return), Subsea, Wind (single-stage, multi-stage, foundations) and Direct Fit tensioners, plus hydraulic nuts. The pumps include LIGHTNING with battery, VECTOR with pendant control, HY-Series, HY-TWIN, HY-EX for explosive atmospheres and JETPRO S. |
Why HYTORC?
- AVANTI wrench with over 130,000 ft-lb in the maximum-capacity model — for very large flanges and joints
- STEALTH and XLCT for tight spaces — the slim head fits where ordinary wrenches do not
- LION GUN with data logging and 36 V LITHIUM SERIES II — portable electric tightening, without hydraulic hoses
- HY-EX 3-Stage pumps with ATEX versions according to the manufacturer's technical documentation and HY-AIR on compressed air — power for explosive atmospheres
- HYTORC and TRUE-LOCK washers and nuts — the nut converts torque into tension, and the reaction washer eliminates the separate support device
Which HYTORC codes and series are requested most often?
| Code | Description |
|---|---|
| MXT+ | Hydraulic wrench with coaxial drive and cycle counter |
| MXT | Hydraulic wrench for general maintenance |
| EDGE S | Hydraulic wrench for high repeatable torques |
| VERSA | Hydraulic wrench for general maintenance |
| AVANTI | Hydraulic wrench with a very wide torque range |
| STEALTH | Hydraulic wrench for tight spaces |
| XLCT | Hydraulic wrench with low clearance |
| LITHIUM SERIES II | 36 V electric tool, up to 8,000 ft-lb |
| LION GUN | 18 V electric tool with data logging |
| LION GUN X | 36 V electric tool, up to 3,000 ft-lb |
| LIGHTNING PUMP | Battery-powered hydraulic pump |
| VECTOR | Electric hydraulic pump with LCD pendant |
| HY-EX 3-Stage | Electric hydraulic pump with versions for explosive atmospheres |
| JETPRO S | Portable hydraulic pump for tools up to 10,000 ft-lb |
Where is HYTORC equipment used?
- Petrochemicals and refineries — tightening of flanges and joints in process plants
- Power generation — bolted joints on power plant equipment
- Wind energy — tensioners for tower and foundation studs
- Oil and gas, LNG — flanged joints in extraction, transport and liquefaction plants
- Construction and bridges — bolted joints on steel structures
How do we supply HYTORC in Romania?
We can quote HYTORC hydraulic torque wrenches, electric tools, stud tensioners, pumps and accessories (hexagonal heads, reaction arms, hoses). For a quotation, send us the tightening torque, the nut or stud size, the free space around the joint, the energy source available (air, mains, battery) and, if you already have tools, the model code. HYTORC hydraulic wrenches and electric tools are supplied to order, usually in 1–4 weeks. For pumps and complete sets: depending on the specification, the lead time may be longer. The exact lead time is stated in the quotation.
The tightening torque of a joint is set by the installation designer, and tool calibration is outside our offer.
Frequently asked questions about HYTORC
What does HYTORC make?
HYTORC manufactures equipment for tightening bolted joints: hydraulic torque wrenches (MXT+, EDGE S, AVANTI, STEALTH), electric tools (LITHIUM SERIES II, LION GUN), stud tensioners, hydraulic pumps, and special washers and nuts. They are used on large flanges, turbines and steel structures.
How do I choose between a hydraulic wrench and a stud tensioner?
The hydraulic wrench works by torque, while the tensioner works by direct stretching of the stud; the choice depends on the stud size, the space around the joint and the project requirement. Send us the stud size, the torque or tension required and the free working space.
Do you supply HYTORC equipment in Romania, and how quickly?
Yes. HYTORC hydraulic wrenches and electric tools are supplied to order, usually in 1–4 weeks. Hexagonal heads, reaction arms and hoses: 24–72 h when the item is in stock, locally or at the supplier. For pumps and complete sets: depending on the specification, the lead time may be longer. We confirm the exact lead time in the quotation.
I have an older HYTORC wrench; can I ask for parts or a replacement head?
Yes, with the code on the wrench body (for example MXT or XLCT), the size of the hexagonal head needed and, if possible, a photo of the nameplate. With these details we request confirmation of the compatible part; for discontinued models we tell you whether a current version exists.
What details do I send for a quotation on a tightening set?
The torque or tension required, the nut and stud size, how many joints are tightened on the job, the space available at the side and above the nut, the energy source (air, mains, battery) and whether you work in an explosive atmosphere.
How do I request a HYTORC quotation?
Send the HYTORC code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: HYTORC (manufacturer documentation)

