IEP Technologies supplier in Romania
For IEP Technologies we quote GE, KE, KER and EVN vent panels, eSUPPRESSOR, PistonFire II and EHRD II suppressors, isolation valves and Atexon systems; for a quotation we need the equipment, the substance, Kst, Pmax and the opening pressure.
Who is IEP Technologies and what does it make?
IEP Technologies makes protection systems against dust, gas and vapour explosions in process installations. The programme includes explosion vent panels (explosion vents), standard and flameless, explosion isolation valves, suppressors with extinguishing agent, Atexon spark detection and extinguishing systems and explosion relief valves for gas and dual-fuel engines. Brilex vent panels are made in Germany, in Brilon, and Atexon systems come from Finland.
Protection has three stages that are chosen together. Venting releases pressure and flame into a safe area: GE panels are domed and withstand vacuum and overpressure cycles, on filters with pneumatic cleaning, KE suits cyclones, and KER is intended for powder handling and storage. When the flame cannot be discharged outdoors, EVN, IVE and IV8 flameless vents are used, with an integrated flame arrester. Suppression detects the pressure rise in milliseconds and discharges the agent from eSUPPRESSOR, PistonFire II, EHRD II or PHRD.
Isolation stops the propagation of the explosion through ducts: the active mechanical valve closes in fractions of a second on the command of a detector and a control unit, and the passive one closes on the pressure wave. Atexon systems detect sparks and extinguish them automatically with about five litres of water, without stopping the process. The range protects dust collectors, cyclones, dryers, bucket elevators for grain, pneumatic conveying and mills, in industries such as food, chemicals, plastics, wood and paper, and energy. A spare part is identified by the device series, the opening pressure and the size.
What do we supply from the IEP Technologies range?
| Product | Description |
|---|---|
| Explosion vent panels | Panels that open at a set pressure, in flat, multilayer or domed form: GE, KE and KER for standard venting, and EVN, IVE and IV8 for flameless venting, with integrated flame arrester. |
| Suppressors and isolation valves | Systems made up of a detector, control unit and suppressor: eSUPPRESSOR, PistonFire II, EHRD II and PHRD, for dust, gases and vapours. Isolation valves, active or passive, form a mechanical barrier in the duct against the propagation of flame and pressure. |
| Atexon for spark detection | Systems for detecting and extinguishing sparks and embers that could reach protected equipment, such as filters; extinguishing is automatic, with a small amount of water, without stopping production. |
| Relief valves for engines | Reusable, flameless valves for gas and dual-fuel engines used in marine propulsion and power generation. The valve plate lifts on overpressure and closes immediately, with ATEX variants and marine approvals according to the manufacturer's documentation. |
Why IEP Technologies?
- GE, KE and KER vent panels — GE for alternating vacuum and overpressure, KER for powder installations with static pressure
- EVN, IVE and IV8 flameless venting — for bucket elevators and equipment inside buildings
- eSUPPRESSOR with electromechanical actuation — no pyrotechnic elements and with monitored functions
- Active or passive isolation — fast-closing valves that prevent flame and pressure from reaching the connected ducts
- Atexon — spark detection and extinguishing with about five litres of water, without interrupting the process
Which IEP Technologies codes and series are requested most often?
| Code | Description |
|---|---|
| GE | Domed vent panel, resistant to vacuum and overpressure |
| KE | Vent panel for cyclones and for vacuum below 60% of the opening pressure |
| KER | Vent panel for powder handling and storage |
| EVN | Flameless venting, with integrated flame arrester |
| IVE | Flameless venting for bucket elevators |
| IV8 | Flameless venting for equipment inside buildings |
| eSUPPRESSOR | Fast-discharge suppressor, without pyrotechnic elements |
| PistonFire II | Extinguishing agent vessel with dust-resistant housing |
| EHRD II | Nitrogen suppressor for dust, gases and hybrid mixtures |
| PHRD | Suppressor for gases, solvent vapours and combustible dust |
| High-Speed Isolation Valve | Active isolation valve, fast-closing |
| Atexon | Spark detection and extinguishing system |
Where is IEP Technologies equipment used?
- Food and grain industry — dust collectors, bucket elevators and mills with combustible dust
- Wood and paper — cyclones, dust collectors and pneumatic conveying with spark detection
- Chemicals, plastics, paints and pigments — explosion suppression and venting from dryers, mills and collectors
- Energy and marine propulsion — relief valves for gas and dual-fuel engines
How do we supply IEP Technologies in Romania?
We can quote vent panels, suppressors, isolation valves, Atexon systems and engine relief valves from IEP Technologies, including spare parts for existing installations. We supply IEP Technologies equipment to order; depending on the specification, the lead time can be longer, and we confirm the date in the quotation. For an accurate request, send the protected equipment (type and volume), the combustible substance and its explosion parameters (Kst, Pmax, if you have them), the opening pressure, the series of the existing device and the installation area.
Protection of a machine is determined by calculation on the volume and the explosion parameters of the substance, so the devices cannot be selected from the type of installation alone.
Frequently asked questions about IEP Technologies
What does IEP Technologies make?
IEP Technologies makes industrial explosion protection systems: standard and flameless vent panels, suppressors, isolation valves, Atexon spark detection and extinguishing systems and explosion relief valves for gas engines.
How do I choose between venting, suppression and isolation?
Venting releases pressure into a safe area, suppression stops the explosion inside the protected enclosure itself, and isolation prevents its propagation through ducts. They are usually combined. The choice depends on the substance, the volume and strength of the equipment and its position; send this data.
Do you supply IEP Technologies equipment in Romania and how fast?
Yes. IEP Technologies equipment is supplied to order. Depending on the specification, the lead time can be longer, especially for complete systems with detection and control; the date is confirmed in the quotation, once we receive the data on the equipment and the substance.
I have an old vent panel; can I order a replacement?
Yes, if we identify its series (for example GE, KE or KER), dimensions, opening pressure and material. Replacement is not determined from dimensions alone, because the opening pressure is a design value for the protection of the equipment.
What data is needed for an Atexon spark detection system?
The conveying route (diameter, length), the air flow and the material conveyed, the flow velocity, the downstream equipment to be protected, the working environment and the water source for extinguishing. With this data the number of detectors and extinguishers is determined.
How do I request a IEP Technologies quotation?
Send the IEP Technologies code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: IEP Technologies (manufacturer documentation)

