IKA supplier in Romania

For IKA we quote the ULTRA-TURRAX UTL 2000 and DISPAX-REACTOR DR 2000 in-line dispersers, MK 2000 colloid mills, RW 20 digital and EUROSTAR stirrers; we need the model, the size, the generator fitted, the product processed and the flow rate.

Headquarters: Staufen, Germany

Request a quote

Who is IKA and what does it make?

IKA is a German manufacturer of mixing, dispersing, milling and heating equipment, headquartered in Staufen, working in two directions: laboratory equipment and process machines for production. In the laboratory, the range comprises RW 20 digital and EUROSTAR overhead stirrers, RCT basic and C-MAG hotplate magnetic stirrers, ULTRA-TURRAX T 25 and T 50 dispersers, rotary evaporators, orbital shakers and ROTAVISC viscometers. In production, the 2000 series machines disperse, homogenise, wet-mill and incorporate powders into liquids, in continuous flow or in batches. For a quotation, send us the model and the identification number from the device.

The 2000 process series is modular, and machines of all sizes work at the same peripheral speed of the rotor, which makes it possible to move from sample to production. The ULTRA-TURRAX UTL 2000 is a single-stage in-line dispersing machine, for emulsions and suspensions, with interchangeable rotor–stator generators, pressures of up to 16 bar and medium temperatures of up to 120 °C. The DISPAX-REACTOR DR 2000 has three generators in series, for very fine emulsions and suspensions with a narrow distribution, and can be cleaned and sterilised in place (CIP and SIP). The MK 2000 colloid mill mills wet, by friction, between cones with a wide gap at the inlet and a very narrow one at the outlet.

For powders, the CMS 2000 draws the liquid from a tank and the powder from any container, without dust and without agglomerates, in recirculation, up to solids concentrations of 80 %; for batch work there is also the CMX 2000 mixer. The MHD 2000 continuously mixes liquids with proportionally dosed powders or granules, for large production volumes. The sizes start from the Labor-Pilot 2000/4, which uses the same tools as the large machines and serves for developing recipes. The mechanical seal is of cartridge construction, the generators can be made of ceramic, carbides or stellite, and the motors are supplied in all protection classes, including explosion-proof. On the RW 20 digital stirrer, two speed stages cover 60–2,000 rpm, for up to 20 l of water and a maximum torque of 150 Ncm.

What do we supply from the IKA range?

Product	Description
ULTRA-TURRAX UTL 2000 and DISPAX-REACTOR DR 2000 In-line Dispersers	The UTL 2000 disperses emulsions and suspensions in a single stage, with interchangeable generators, at up to 16 bar and a medium temperature of up to 120 °C, with no dead zones, ready for CIP. The DR 2000 has three generators in series, for smaller droplets and particles and longer stability of the mixture.
MK 2000 Colloid Mill	It mills wet, by friction and shear, between the rotor cone and the stator cone, with a wide gap at the inlet and a very narrow one at the outlet. It is used for colloidal solutions, microsuspensions, pigment incorporation, metal oxide suspensions, microencapsulation, coating compounds, mustard and mayonnaise.
CMS 2000, CMX 2000 and MHD 2000 Powder Incorporation Machines	The CMS 2000 works in batches: the rotor draws in the liquid and the powder, without dust and agglomerates, up to solids concentrations of 80 %; the CMX 2000 also works in batches, in recirculation. The MHD 2000 works continuously, with liquid and proportionally dosed powder or granules, for fertilisers, pigments and thickeners such as pectin, guar gum, starch and xanthan.
Laboratory equipment: RW 20 digital, EUROSTAR, T 25, RCT basic	The RW 20 digital overhead stirrer has two speed stages, 60–500 and 240–2,000 rpm, for up to 20 l of water and 150 Ncm. The laboratory range also includes the EUROSTAR 40 digital and 60 control stirrers, the ULTRA-TURRAX T 25 digital disperser, the RCT basic and C-MAG HS 7 magnetic stirrers and the RV 10 digital rotary evaporator.

Why IKA?

Modular 2000 process series — the same peripheral speed at all sizes, for moving from pilot to production
Interchangeable rotor–stator generators — the machine adapts to emulsion, suspension or wet milling
Labor-Pilot 2000/4 with the same tools as the large machines — the recipe is worked out before investing in production
Dust-free powder incorporation with the CMS 2000 and MHD 2000 — solids concentrations of up to 80 % on the CMS 2000
Laboratory equipment from the same brand — RW 20 and EUROSTAR stirrers, T 25 dispersers, RCT basic hotplates

Which IKA codes and series are requested most often?

Code	Description
UTL 2000/4	In-line disperser Labor-Pilot, one stage, DN 25 / DN 15 connections
UTL 2000/10	ULTRA-TURRAX in-line disperser, production size
DR 2000/05	DISPAX-REACTOR with three generators in series
DR 2000/20	DISPAX-REACTOR for high flow rates, DN 80 / DN 65 connections
MK 2000/10	Colloid mill for wet milling
CMS 2000/05	Batch powder incorporation machine
MHD 2000/20	Continuous liquid–powder mixing machine
RW 20 digital	Overhead stirrer, 60–2,000 rpm, up to 20 l of water
EUROSTAR 40 digital	Laboratory overhead stirrer with digital display
EUROSTAR 60 control	Laboratory overhead stirrer, control variant
T 25 digital	ULTRA-TURRAX laboratory disperser, 1–2,000 ml
T 50 digital	ULTRA-TURRAX laboratory disperser, T 50 variant
RCT basic	Magnetic stirrer with heated hotplate
C-MAG HS 7	Magnetic stirrer with heated hotplate, HS 7 variant
RV 10 digital	Laboratory rotary evaporator

Where is IKA equipment used?

Food industry — sauces, juices, sugar solutions, mustard and mayonnaise on the UTL 2000 and MK 2000
Chemistry — varnishes, polymer emulsions and catalysts on the DISPAX-REACTOR DR 2000
Paints and adhesives — dyes, binders, molten resins and glues on the ULTRA-TURRAX UTL 2000
Mineral processing — alumina and calcium carbonate suspensions on the CMS 2000
Development and quality control laboratories — RW 20 stirrers, T 25 dispersers and Labor-Pilot 2000/4

How do we supply IKA in Romania?

We can quote IKA laboratory equipment, from overhead and magnetic stirrers to ULTRA-TURRAX dispersers and rotary evaporators, as well as 2000 series process machines and parts for them, such as rotor–stator generators and mechanical seals. For laboratory devices, send us the model and the identification number from the label; for a process machine, the type and size (for example UTL 2000/10), the generator fitted, the product, the viscosity, the flow rate and the protection class of the motor. We bring them in to order, through EU supply channels, usually in 1–4 weeks, and 24–72 h when the item is available locally or at the supplier; for process machines, depending on the brand and the specifications, the lead time may be longer.

We quote IKA devices and machines by model and process data, and for a new product the choice of generator starts from the viscosity and particle size that you send us.

Frequently asked questions about IKA

What does IKA make?

IKA, from Staufen, Germany, makes laboratory equipment and process machines: overhead and magnetic stirrers, ULTRA-TURRAX dispersers, rotary evaporators, orbital shakers and viscometers, and for production UTL 2000 and DR 2000 in-line dispersers, MK 2000 colloid mills and CMS 2000 and MHD 2000 powder incorporation machines.

How do I choose between the UTL 2000 and the DR 2000?

The UTL 2000 has a single dispersing stage and suits emulsions and suspensions with a relatively coarse but narrow distribution. The DR 2000 has three generators in series and gives finer droplets and particles, with longer stability. Send us the product, the viscosity, the hourly flow rate and the fineness required, and we propose the type and size.

How soon do you bring IKA equipment and machines to Romania?

We bring in laboratory devices and common parts to order, by import from the EU, usually in 1–4 weeks, and 24–72 h when the item is available locally or at the supplier. For 2000 series process machines, configured for the product and with a motor in the protection class required, depending on the brand and the specifications, the lead time may be longer.

Can you supply a replacement generator for an existing ULTRA-TURRAX UTL?

Yes, if you send us the type and size of the machine from the nameplate, for example UTL 2000/20, the serial number and the type of generator fitted. Rotor–stator generators are interchangeable within the 2000 series, so we can also quote a different generator fineness, suited to your product, on the same machine.

What details do I send for a quotation on an IKA dispersing machine?

The product and its components, the viscosity, the working temperature and pressure, the hourly flow rate or batch volume, the fineness required, whether the process is continuous or in batches, the CIP cleaning requirements, the mains voltage and the Ex zone, if the motor works in an explosive atmosphere.

How do I request a IKA quotation?

Send the IKA code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.