Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Magtrol supplier in Romania

Dynamometers, torque sensors and hysteresis brakes

Headquarters: Buffalo, New York, USA

Request a quote

Who is Magtrol and what does it make?

Magtrol is a maker of motor testing and torque measurement equipment, active for over seven decades through two entities: Magtrol Inc, headquartered in the USA, at Buffalo (New York State), focused on motor testing equipment, hysteresis brakes and clutches, and Magtrol SA, in Switzerland, which also offers motor testing equipment, plus products for measuring load, force, weight and displacement. For a testing laboratory or a small motor manufacturer, Magtrol means a whole system: dynamometer, torque sensor, controller, power analyser and software.

The dynamometers are of three types, according to how they take up the load. The HD hysteresis series works with no minimum speed needed to create torque and allows a full ramp from no-load running to locked rotor, in the small and medium range (up to 14 kW in intermittent duty). The WB eddy-current series gives torque that rises with speed and suits high speeds and medium and high powers, with the WB 23 and WB 27 models for very high speeds. There are also powder versions. The range includes over fifty dynamometers.

The DSP7000 and DSP7010 controllers, the 7500 series power analyser and the M-TEST 7 program (up to 63 parameters) complete the measuring chain. The TS 100 and TM 300 torque sensors are mounted in line on the shaft and give a torque and speed signal. In Romania, these systems are of interest to electric motor testing laboratories, gear motor manufacturers and workshops that repair motors and want to check the torque after rewinding.

What do we supply from the Magtrol range?

ProductDescription
HD (hysteresis) and WB (eddy-current) dynamometersThe HD series covers small and medium powers, up to 14 kW in intermittent duty, with torque at no minimum speed. The WB series gives torque that rises with speed, with low inertia, and WB 23 and WB 27 are designed for high speeds. There is also a Micro Dyne version for miniature motors.
DSP7000 and DSP7010 controllersDigital signal processing controllers for hysteresis, eddy-current or powder dynamometers. They control an in-line torque sensor and auxiliary instrumentation, with full control from a PC via the M-TEST 7 program.
TS 100 and TM 300 torque sensorsIn-line torque transducers with integrated electronic module. TS 100 offers ±5 V (±10 V) output on an 8-pin connector plus a USB interface; TM 300 has ±5 V (±10 V) output and an open-collector speed output, with high overload protection.
7500 series power analyserInstrument for power measurements from DC up to 80 kHz AC: voltage, current, active and apparent power, frequency, crest factor and power factor on the same display. It is used alone or together with a Magtrol dynamometer.

Why Magtrol?

  • Three braking technologies — hysteresis (HD), eddy-current (WB) and powder — chosen according to the power and speed of the motor under test, without changing the rest of the system
  • Hysteresis dynamometers, with no minimum speed for torque — full ramp from no-load running to locked rotor, useful for the starting characteristic
  • Complete measuring chain — dynamometer, torque sensor, DSP controller, 7500 power analyser and M-TEST 7 software from the same range
  • Special systems to order — cogging and detent torque tests, four-quadrant systems and custom test lines
  • Manufacturer's laboratory services — torque calibration, equipment rental and motor testing, separate from equipment sales

Which Magtrol codes and series are requested most often?

CodeDescription
HDHysteresis dynamometer family
WB 23Eddy-current dynamometer, high speeds
WB 27Eddy-current dynamometer, high speeds
DSP7000Dynamometer controller, high speed, programmable
DSP7010Dynamometer controller with digital processing
7500Power analyser, DC – 80 kHz
M-TEST 7Motor testing software, Windows 10/11
TS 100In-line torque sensor, with USB interface
TM 300In-line torque sensor, ±5 V output
CTSCogging torque test system
Micro DyneDynamometer for miniature motors
HA, LAB, FLShunt series for the 7500 analyser

Where is Magtrol equipment used?

  • Electric motor manufacturers — testing the torque-speed curve and starting
  • Motor repair workshops — checking the torque after rewinding
  • Motors for unmanned vehicles and drones — dedicated tests
  • Surgical and dental instruments — custom test systems for miniature motors
  • Tension and torque control — hysteresis brakes and clutches

How do we supply Magtrol in Romania?

We can quote Magtrol dynamometers, controllers, torque sensors and hysteresis brakes or clutches. Supply is to order; the lead time is usually 1–4 weeks, and for complete or custom systems it is longer and is set in the quotation. The request should contain the power and maximum speed of the motor to be tested, the peak torque, the type of test (torque-speed, locked rotor, cogging) and whether you also want software. The dynamometer type is selected from these data.

The availability of models made in Switzerland or the USA is estimated after the configuration is confirmed, and torque calibration is outside our local offer.

Frequently asked questions about Magtrol

What product range does Magtrol have?

Magtrol makes dynamometers (hysteresis, eddy-current and powder), torque sensors, controllers, power analysers and software for motor testing, plus hysteresis brakes and clutches. Magtrol SA is based in Switzerland, and the American entity is headquartered in Buffalo, New York State.

How do I choose between an HD and a WB dynamometer?

HD (hysteresis) gives torque at any speed, including locked rotor, up to 14 kW in intermittent duty. WB (eddy-current) gives torque that rises with speed and works at high speeds and higher powers. What helps is the power, the maximum speed and the type of duty (continuous or intermittent).

Do you supply Magtrol equipment in Romania, and how fast?

Yes, to order, usually in 1–4 weeks, depending on the model. Complete test systems, those with large dynamometers or with configured software have a longer lead time, confirmed in the quotation.

Can I use an old TM 300 sensor with a DSP7010 controller?

DSP7010 is designed to work with Magtrol in-line torque sensors, but the compatibility of a specific pair is checked from the sensor code. Send the engraved code and the torque range.

What details should I give for a motor test system quotation?

The rated power, the maximum speed, the motor supply voltage, the maximum torque, the type of test (curves, locked rotor, cogging, pass/fail) and whether you want data acquisition on a PC. On the basis of this information, the dynamometer, the sensor and the controller are selected from the manufacturer's documentation.

How do I request a Magtrol quotation?

Send the Magtrol code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Magtrol (manufacturer documentation)