Mitutoyo supplier in Romania
For Mitutoyo we quote ABSOLUTE Digimatic digital calipers, Quantumike IP65 digital micrometers, SJ-410 surface roughness testers and CRYSTA-Apex S coordinate measuring machines; we quote by code and deliver throughout Romania.
Founded in 1934 · Headquarters: Kawasaki, Japan
Who is Mitutoyo and what does it make?
Mitutoyo is a Japanese manufacturer of industrial metrology instruments, founded in 1934. The range runs from simple digital calipers to three-dimensional measuring machines (CMM - Coordinate Measuring Machine); the accuracy of each model is confirmed from its datasheet.
The Mitutoyo range is broad: calipers (vernier, dial, digital) with 0.01 mm resolution, micrometers (outside, inside, depth), indicators (analogue dial, digital), hardness testers, profile projectors for inspecting small complex parts, and portable and laboratory surface roughness testers. To these are added CMMs - from manual systems to fully automated CNC machines with MCOSMOS software for reverse engineering and statistical process control (SPC).
Calibration certificates, traceability and recalibration services differ by model and by country; we confirm them by code, from Mitutoyo's documentation.
What do we supply from the Mitutoyo range?
| Product | Description |
|---|---|
| ABSOLUTE Digimatic Calipers | Digital calipers with ABSOLUTE technology - no need to reset the origin at power-on; the encoder is electromagnetic (inductive) up to 200 mm and capacitive above that. Resolution 0.01 mm, accuracy ±0.02 mm to ±0.07 mm depending on range. IP67 protection only on certain models, battery life of about 3.5 years in normal use. Data output through SPC cable (Statistical Process Control); stainless steel construction, inside, outside, depth and step measurement. Models 0-150mm, 0-200mm, 0-300mm, 0-500mm, 0-1000mm. Suited to quick inspection of parts on the production line, without zeroing at every power-on. |
| Quantumike IP65 Digital Micrometers | Outside digital micrometers with IP65 protection against dust and water jets - ideal for a tough shopfloor. Accuracy ±2 µm to ±3 µm (depending on model), resolution 0.001 mm, carbide measuring face, rapid spindle advance (10 mm per revolution), measuring force 7-12 N. |
| CRYSTA-Apex S Series CMM | Three-dimensional measuring machines - natural granite for thermal stability, preloaded air bearing guideways for frictionless motion, sensors and volumetric accuracy per ISO 10360-2, depending on model. Working volumes are confirmed from Mitutoyo's documentation. MCOSMOS software with DMIS, CAD import, GD&T analysis, reverse engineering, SPC export. Options: multi-sensor (tactile, laser, vision), rotary table, active temperature compensation. The environmental conditions required (temperature, vibration) are confirmed from the model's documentation. |
| SJ-410 Surface Roughness Tester | Portable Surftest SJ-410 roughness tester, calculating roughness parameters (Ra, Rz, Rq, Rt etc.) per ISO, JIS or ANSI; the measuring range, display, memory, battery life and interfaces are confirmed from Mitutoyo's documentation by code. Ideal for inspecting machined surfaces - grinding, polishing, EDM, casting - directly on the shopfloor without transport to the laboratory. |
Why Mitutoyo?
- Accuracy stated in the catalogue - ABSOLUTE Digimatic calipers: ±0.02 mm to ±0.07 mm depending on range; series 293 digital micrometers: ±2 µm to ±3 µm
- Calibration certificates
- High durability - robust construction designed for long-term use
- Broad range - from calipers and micrometers to three-dimensional measuring machines (CMM)
- Advanced MCOSMOS software for CMM with GD&T, reverse engineering, SPC
- Recalibration services and spare parts
Which Mitutoyo codes and series are requested most often?
| Code | Description |
|---|---|
| Series 101 | outside micrometer with satin chrome finish and conical frame |
| Series 103 | standard outside micrometer with ratchet stop |
| Series 104 | outside micrometer with interchangeable anvils for extended range |
| Series 105 | micrometer with extension rods for measuring up to 2000 mm |
| Series 107 | micrometer with indicator and trigger for go/no-go checking |
| Series 111 | groove micrometer, with small-size measuring faces |
| Series 113 | limit micrometer with adjustable upper and lower limits |
| Series 227 | ABSOLUTE digital micrometer with adjustable measuring force |
| Series 293 | digital micrometer line, with coolant-proof and QuantuMike versions |
| Series 314 | digital micrometer with V-anvil for cutting tools |
| Series 331 | digital micrometer for grooves and point measurement, IP65 protection |
| Series 340 | digital outside micrometer with interchangeable anvils, IP65 protection |
| Series 395 | digital micrometer for tubes and spherical surfaces, IP65 protection |
| Series 500 | ABSOLUTE digital caliper, solar and coolant-resistant versions |
| Series 505 | dial caliper, graduation of 0.01 or 0.02 mm |
| Series 530 | standard vernier caliper, optionally with carbide jaws |
| Series 550 | ABSOLUTE Digimatic caliper with nib-type jaws |
| Series 573 | ABSOLUTE Digimatic caliper in special configurations: offset, depth, tube |
| Series 700 | MyCAL-Lite digital caliper for general-purpose applications |
Where is Mitutoyo equipment used?
- Automotive industry (inspection of engine, transmission and chassis parts)
- Aerospace (verification of critical components)
- Medical devices (implants, surgical instruments, prostheses)
- Moulds and tooling (injection moulds, stamping, casting moulds)
- Precision machining (CNC parts, grinding, EDM, lapping)
- Electronics (PCBs, connectors, housings with fine tolerances)
- Energy (wind and hydro turbines)
- Research and development (laboratories)
- Quality control laboratories (quality departments)
- Education (technical institutes and universities, for metrology training)
How do we supply Mitutoyo in Romania?
We work from the technical information published by Mitutoyo, and calibration and service details are confirmed case by case. We bring in the calipers, micrometers or CMM components requested: for current instruments, in 24–72 h when the item is in stock, locally or at the supplier, or typically 1–4 weeks to order for complex equipment. For a correct quotation, please tell us the instrument you are looking for, the measuring range needed and the accuracy your application requires. The actual delivery time follows once we have checked availability at the supplier.
Calibration and service of Mitutoyo instruments under warranty are carried out through the manufacturer's network.
Frequently asked questions about Mitutoyo
How do I choose the right Mitutoyo micrometer series for my part?
The choice depends on the shape of the part and the measuring range: the 293 series covers general-purpose digital micrometers, the 314 series is designed for cutting tools with a V-anvil, and the 395 series for tubes and spherical surfaces. For parts with grooves or fine points, the 111 and 112 series are suitable. Send us the drawing or the type of surface to be measured and we will recommend the right series from the manufacturer's catalogue.
What is the difference between the 227 series and the 293 series of Mitutoyo digital micrometers?
The 227 series is an ABSOLUTE line with adjustable measuring force, useful for soft materials or parts that can deform under constant pressure. The 293 series is the manufacturer's general-purpose digital line, with coolant-proof versions and the QuantuMike model for humid industrial environments or those with chips. Both keep the origin when switched off, with no reset on restart.
Do you supply Mitutoyo products in Romania?
Yes, we bring in Mitutoyo products to order, identified by the series or code given in the manufacturer's technical documentation. We state the lead time and availability in the quotation; delivery typically takes 1–4 weeks to order — it depends on the exact configuration (jaws, IP65 protection, data output) and on the availability of that version at the factory.
What information do I need to send for a Mitutoyo instrument quotation?
The exact series or code, if you know it, plus the measuring range, the graduation required and the type of jaws or anvil needed. If you do not know the series, describe the part and the working conditions (humidity, chips, access space) and we will identify the suitable version from the manufacturer's index before preparing the quotation.
What does IP65 mean on a Mitutoyo instrument?
IP65 indicates that the instrument is protected against dust and water jets from any direction, useful on machine tools where coolant and swarf are present. At Mitutoyo, the 331, 340 and 395 series have this protection, unlike the classic mechanical micrometers of the 101–116 series, which are not sealed.
How do I request a Mitutoyo quotation?
Send the Mitutoyo code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: Mitutoyo, Mitutoyo Corporation, Wikipedia (manufacturer documentation)

