Pferd supplier in Romania
Abrasive and finishing tools for metalworking
Founded in 1799
Who is Pferd and what does it make?
PFERD is a German manufacturer of abrasive and finishing tools, active since 1799. The range covers cutting and grinding discs, flap discs, carbide burrs, industrial wire brushes and precision files, used where metal has to be cut, cleaned or finished by hand or with portable power tools. For customers in Romania we can quote most of these product families, depending on the size and shape required.
What sets the portfolio apart is the variety of shapes and grits within the same family: the POLIFAN series of flap discs has variants such as Z SGP CURVE STEELOX, curved for better contact with the surface at a low working angle, while the CC-GRIND VIEW and CC-GRIND ROBUST lines cover grinding discs with improved visibility of the work area and high material removal respectively. The SG STEEL cutting discs complete the range for cutting steel. The RCK drive system generates less noise and vibration than conventional drives.
PFERD suits situations where variety of shapes matters — carbide burrs for toolmaking, industrial brushes for cleaning welds or rust, files for manual fitting — not just the ordinary cutting or grinding discs available anywhere.
What do we supply from the Pferd range?
| Product | Description |
|---|---|
| POLIFAN Series Flap Discs | Flap discs for grinding and fine finishing, with straight and curved variants — the Z SGP CURVE STEELOX variant is part of the POLIFAN range. The abrasive material varies by application (steel, stainless steel or non-ferrous materials), and the disc is fitted on the angle grinder. |
| CC-GRIND Grinding Discs | A family of grinding discs in two variants: CC-GRIND VIEW, which offers good visibility of the work area, and CC-GRIND ROBUST, geared to high material removal. |
| SG STEEL Series Cutting Discs | Thin cutting discs for cutting steel, designed for a short cutting time and a clean cutting line, with different thicknesses depending on the disc diameter and the type of grinder used. They are fitted on standard angle grinders and are a typical choice for metal fabrication workshops. |
| Carbide Burrs and Industrial Brushes | Carbide burrs with a double-cut geometry and 14° cone (L shape), for precision manual metalworking, alongside solid carbide tools for similar operations. Industrial wire brushes, wheel or cup type, knotted or standard twist, complete the range for cleaning surfaces before welding and for removing rust respectively. |
Why Pferd?
- Wide range of POLIFAN flap discs, with curved (CURVE) variants for optimal contact at low working angles
- The CC-GRIND VIEW and CC-GRIND ROBUST lines cover visibility of the work area and high material removal respectively
- The RCK drive system generates less noise and vibration than conventional drives
- Double-cut carbide burrs and 14° cone for manual metalworking and toolmaking
- Industrial wire brushes, wheel and cup type, knotted or standard twist, for cleaning and mechanical stripping
Which Pferd codes and series are requested most often?
| Code | Description |
|---|---|
| SG STEEL | Thin cutting disc for cutting steel |
| POLIFAN Z SGP CURVE STEELOX | Curved flap disc for grinding steel |
| CC-GRIND VIEW | Grinding disc with improved visibility of the work area |
| CC-GRIND ROBUST | Grinding disc geared to high material removal |
| RCK | RCK drive system |
| Wire wheel brush, knotted | Wheel brush for coarse mechanical cleaning |
| Wire wheel brush, pipe type | Brush for cleaning the inside of metal pipes |
| Wire cup brush, knotted | Cup brush for stripping and cleaning surfaces |
| Wire cup brush, standard twist | More flexible cup brush for irregular surfaces |
| Carbide burr, double cut | Carbide burr for fine metalworking |
| Carbide burr, 14° cone L shape | Conical carbide burr for precision fitting |
| Solid carbide tool | Solid carbide tool for manual milling |
| Chainsaw chain sharpener | Tool for sharpening chainsaw chains |
| Disc lamelar montat | Small mounted flap disc, on a shank, for narrow areas |
Where is Pferd equipment used?
- Metal fabrication and metal joinery — cutting and grinding with discs from the SG STEEL and CC-GRIND series
- Welding and surface preparation — industrial brushes for cleaning before and after welding
- Toolmaking and precision machining — carbide burrs for manual fitting
- Steel construction — grinding with POLIFAN flap discs on curved surfaces or in corners
- Industrial maintenance — abrasive tools and brushes for stripping and finishing during repairs
How do we supply Pferd in Romania?
We supply PFERD abrasive tools — cutting and grinding discs, flap discs, carbide burrs and industrial brushes — starting from the exact series and shape the customer asks for. For the PFERD range we work strictly on the basis of the manufacturer's documentation. This range is supplied to order, usually in 1–4 weeks. For a quotation, we need the code or exact name of the disc or burr, the diameter and, where relevant, the type of grinder it is fitted on.
Grit or diameter variants are checked individually on each request, before the quotation.
Frequently asked questions about Pferd
What products does PFERD make?
PFERD makes abrasive and finishing tools for metal — cutting and grinding discs, POLIFAN series flap discs, carbide burrs and industrial wire brushes, in variants for angle grinders, straight grinders or hand tools.
How do I choose the right PFERD disc by code?
We start from the diameter of the grinder the disc is fitted on and from the material you are working — steel, stainless steel or non-ferrous. The exact code, for example SG STEEL for cutting or POLIFAN for flap grinding, tells us directly the right family and grit for your application.
What is the difference between CC-GRIND VIEW and CC-GRIND ROBUST?
Both are grinding discs; VIEW puts the emphasis on visibility of the work area, and ROBUST on high material removal — the choice depends on the application and the material being worked.
Do you supply PFERD tools in Romania and how fast?
Yes, we supply to order, usually in 1–4 weeks from confirmation of the exact code. For a correct quotation, please send the diameter, the shape and the material to be worked.
How do I request a Pferd quotation?
Send the Pferd code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: PFERD Inc. (manufacturer documentation)

