Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

REGO-FIX supplier in Romania

For REGO-FIX we quote the powRgrip system with the PGU 9500, 9800 and 9900neo units, micRun tool holders, ER chucks with collets of 0.2–36 mm, the uniTec line and the reCool and secuRgrip systems; for a quotation we need the spindle interface and the tool diameter.

Founded in 1950 · Headquarters: Tenniken, Switzerland

Request a quote

Who is REGO-FIX and what does it make?

REGO-FIX is a Swiss manufacturer of precision tool holders for machine tools, founded in 1950, with its headquarters and plant at Tenniken. The programme comprises five systems: powRgrip (press-fit clamping), micRun, ER (collet chucks), uniTec and measuring technology for tool checking. Tool holders exist for SK, BT, CAT, HSK, CAPTO (ISO 26623), MK, SH, CYL and other interfaces, plus variants for special spindles, such as HJNZ or EWS Varia VX.

The ER collet system has been in the programme since 1972, and the series covers diameters from 0.2 to 36 mm. ER chucks are made for the same interfaces and strongly damp vibration. The powRgrip system clamps the tool by press fit, in an automatic clamping unit (PGU 9500, PGU 9800, PGU 9900neo or PGS 25 and PGS 48) or in a manual one with a hand pump, PGC 2506, and keeps the clamping force and low radial runout after 20,000 tool changes. The micRun system sits between powRgrip and ER, with a total runout of at most 3 µm at 3 × D. For common workshop problems there are reCool, an internal coolant adaptation system, secuRgrip, against tool pull-out, and intRlox, a small nut that does not slip.

The industries served are automotive, aeronautics, watchmaking, moulds and dies, and machine tool builders. For an accurate quotation, what matters is the spindle interface, the tool diameter and length, the speed, the type of cooling and whether a new chuck or the replacement of a worn collet is wanted.

What do we supply from the REGO-FIX range?

ProductDescription
powRgripPress-fit tool holders, with PG 6, PG 10, PG 15, PG 25, PG 32 and PG 48 collets and PGU 9500, PGU 9800, PGU 9900neo, PGS 25 and PGS 48 clamping units, plus the manual unit PGC 2506. The system stresses low radial runout, vibration damping and simple handling.
ER and micRunER collet chucks cover diameters from 0.2 to 36 mm, with high vibration damping. micRun has a clamping nut without slots, so it is quieter, and a total runout of at most 3 µm at 3 × D, sitting between ER and powRgrip.
uniTec and accessoriesA tool holder line covering a wide variety of clamping needs, complemented by the TCD cone cleaning device (base unit and brush heads), clamping nuts, tool holder fixtures and other accessories for handling them in the workshop.
Measuring technologyHigh-precision measuring products, with software for managing the machine fleet, a dashboard, data administration and export, measurement protocols, visualisations and documentation, for process reliability and production quality.

Why REGO-FIX?

  • powRgrip — press-fit clamping, in automatic or manual units, with clamping force and radial runout kept after 20,000 tool changes
  • ER with collets from 0.2 to 36 mm — a single family covering the usual workshop tool diameters
  • micRun — total runout of at most 3 µm at 3 × D, between the precision of powRgrip and the simplicity of ER
  • secuRgrip for PG and ER — protection against tool pull-out, with a threaded insert for shanks with a Weldon flat
  • reCool for CNC lathes and Swiss-type automatic lathes — adapting fixed or driven tools to internal coolant

Which REGO-FIX codes and series are requested most often?

CodeDescription
powRgripPress-fit clamping system
PGU 9500powRgrip automatic clamping unit
PGU 9800powRgrip automatic clamping unit
PGU 9900neopowRgrip automatic clamping unit, neo version
PGS 25Automatic clamping unit, single size
PGS 48Automatic clamping unit, single size
PG 6powRgrip collet, size 6
PG 25powRgrip collet, size 25
PGC 2506Manual clamping unit with hand pump
ERCollet chucks, diameters 0.2–36 mm
micRunSystem between powRgrip and ER, runout of at most 3 µm
uniTecGeneral-purpose tool holder line
reCoolInternal coolant adaptation for ER
secuRgrip PGProtection against tool pull-out, powRgrip
intRloxSmall nut for ER, with no wrench slipping
TCDDevice for cleaning the tool holder cone

Where is REGO-FIX equipment used?

  • Automotive — series milling and drilling with precision tool holders
  • Aeronautics — high-precision machining, with protection against tool pull-out through secuRgrip
  • Watchmaking and fine mechanics — small-diameter tools mounted in ER collets
  • Moulds and dies — finishing with low radial runout
  • Machine tool builders — tool holders mounted on the spindle of the delivered machine

How do we supply REGO-FIX in Romania?

We can quote REGO-FIX tool holders (powRgrip, micRun, ER, uniTec), collets, nuts and accessories, depending on the exact chuck code. For a quotation send us the machine spindle interface (SK, BT, CAT, HSK or another interface, with the size), the tool diameter and length, the maximum speed, whether you use through-spindle coolant and, for collets, the ER or PG series. powRgrip, ER and micRun tool holders are supplied to order, usually 1–4 weeks. For PGU clamping units and measuring devices: depending on the specification, the lead time may be longer. The exact lead time appears in the quotation.

The radial runout obtained in your workshop also depends on the machine spindle and on the cleanliness of the cone.

Frequently asked questions about REGO-FIX

What does REGO-FIX make?

REGO-FIX makes precision tool holders for machine tools: the powRgrip press-fit clamping system, ER collet chucks, micRun, uniTec and measuring technology. The plant is at Tenniken, in Switzerland, and the programme covers SK, BT, CAT, HSK and CAPTO interfaces.

How do I choose between powRgrip, micRun and ER?

powRgrip has very low radial runout and suits fine machining and high speeds, ER is the simple option for a wide variety of diameters, and micRun sits between them. Tell us the machining operation, the diameters and the tolerances required, so we can recommend the system.

Do you supply REGO-FIX tool holders in Romania and how long does it take?

Yes. powRgrip, ER and micRun tool holders are supplied to order, usually 1–4 weeks. ER collets and spare nuts can ship in 24–72 h when the item is in stock, locally or at the supplier. For PGU clamping units and measuring devices: depending on the specification, the lead time may be longer. We confirm the exact lead time in the quotation.

Can I replace a worn ER collet or an older chuck?

Yes, provided we establish the ER series (for example ER 25 or ER 32), the clamping diameter and the chuck interface. Send us the code from the body or a photo and the tool diameter; we confirm the matching item and tell you whether the model is still in the range.

What data should I send for a quotation on a powRgrip system?

The spindle interface (for example HSK-A63 or SK40), the diameters of the tools used, the required length, the type of cooling and whether you also need the automatic clamping unit (PGU or PGS). With these data we choose between the PG sizes and complete the quotation.

How do I request a REGO-FIX quotation?

Send the REGO-FIX code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: REGO-FIX AG (manufacturer documentation)