Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Rinco Ultrasonics supplier in Romania

For Rinco Ultrasonics we quote Standard2-745 and Electrical Motion2-35 machines, ADG2 generators, SV35-100/50 actuators and CH35 cutting heads; we need the model, frequency, material and size of the parts.

Headquarters: Romanshorn, Switzerland

Request a quote

Who is Rinco Ultrasonics and what does it make?

Rinco Ultrasonics is a Swiss manufacturer of ultrasonic equipment for welding and cutting plastics, textiles, films and food products, based in Romanshorn. The programme includes welding machines, generators and modules, actuators for integration into automated lines, cutting devices, manual welding units, complete workstations and components: converters, boosters, anvils and sonotrodes. The systems work at frequencies of 20, 35 and 70 kHz, and the technology also serves for perforating, sealing, riveting, flanging and inserting parts.

The machines are split into three series. Electrical Motion2-20 and Electrical Motion2-35 are servomotor-controlled, with control of force, speed and amplitude in each phase of welding, for medium to large parts and small to medium parts respectively. The pneumatic Standard series includes the Standard2-3000, for welding, cutting and perforating medium and large parts, and the Standard2-745, for small and medium parts. The Standard 50 welds microcomponents. The ADG and ADG2 generators integrate into automated lines and can control several actuators, for example SPA20, MA35-20 or SV35-100/50. For cutting there is the CH35 head, the CS35 station and the HC35 series hand knives, and for manual work the HG20 gun, the HG70 unit, the HT35 tacker and the HW series.

The choice starts from the material and size of the part, the frequency, force and stroke required, the level of process monitoring and the way of integration into the line. The request should also state the replacement components: converter, booster and sonotrode.

What do we supply from the Rinco Ultrasonics range?

ProductDescription
Electrical Motion2 and Standard welding machinesElectrical Motion2-20 and -35 are servo-controlled, Standard2-3000 and Standard2-745 are pneumatic, and Standard 50 is for microcomponents. They weld parts made of plastics, textiles and film, and some variants can also be used in an ISO 6 class clean room.
ADG / ADG2 generators and actuatorsGenerators for automated lines and special machines, with digital and analogue inputs and outputs, plus actuators such as the SPA20 for medium or large parts, the MA35-20 for small or medium parts, the SV35-100/50 and the special SPC35 converter.
Ultrasonic cutting devicesThe SV35-40 and the CH35 head for automatic contour and continuous cutting of textiles and films, the CS35 station for manual cutting and the HC35-5 and HC35-7 hand knives, which cut and seal synthetic textiles at the same time.
Manual units, workstations and componentsThe HG20 gun, the HG70 unit, the HT35 tacker and the HW series for manual work; workstations with an automatic drawer or a rotary table, with a sound-insulating cabin; converters, boosters, anvils and sonotrodes for each frequency.

Why Rinco Ultrasonics?

  • Three working frequencies — 20, 35 and 70 kHz, so from large parts to microcomponents
  • Electrical Motion2 servo machines — force, speed and amplitude are controlled in each phase of welding, with monitoring and traceability
  • ADG2 generators for automation — they control several actuators and integrate into automated lines or special machines
  • Cutting units for textiles and film — CH35 for continuous and contour cutting, HC35 for manual cutting and sealing
  • Separate components — converters, boosters, anvils and sonotrodes can be changed without changing the machine

Which Rinco Ultrasonics codes and series are requested most often?

CodeDescription
Electrical Motion2-20Servo-controlled welding machine, medium and large parts
Electrical Motion2-35Servo-controlled welding machine, small and medium parts
Standard2-3000Pneumatic welding, cutting and perforating machine
Standard2-745Pneumatic machine for small and medium parts
Standard 50Machine for welding microcomponents
ADG2Series of ultrasonic generators
ADGSeries of ultrasonic generators
SPA20Special actuator for medium and large parts
MA35-20Special actuator for small and medium parts
SV35-100/50Special actuator for small to large parts
SV35-40Cutting actuator for synthetic textiles
CH35Cutting head for textiles and film
CS35Manual cutting station for film and textiles
HC35-5Ultrasonic hand knife for cutting and sealing
HG20Ultrasonic manual welding gun
HT35Manual spot-fixing unit (tacker)

Where is Rinco Ultrasonics equipment used?

  • Automotive — welding plastic parts
  • Packaging — ultrasonic sealing and cutting
  • Textiles and nonwovens — cutting and sealing edges
  • Food cutting — ultrasonic in-line cutting devices
  • Electronics and microcomponents — welding with the Standard 50

How do we supply Rinco Ultrasonics in Romania?

We can quote Rinco ultrasonic welding machines, ADG2 generators, actuators, cutting devices and components (converters, boosters, sonotrodes). They are supplied to order; the time is usually 1–4 weeks, and for systems configured for the application it may be longer. For a correct quotation, send the model from the nameplate (for example Standard2-745), the frequency, the material and size of the parts, the type of joint or cut and the protocol required by the line. The exact time is confirmed in the quotation.

The sonotrode and anvil for a new part are determined from welding trials, not only from the machine model.

Frequently asked questions about Rinco Ultrasonics

What does Rinco Ultrasonics make?

Rinco Ultrasonics, from Romanshorn, makes ultrasonic welding machines, generators, actuators for automation, cutting devices for textiles, film and food, manual units and components such as converters, boosters and sonotrodes, at 20, 35 and 70 kHz.

How do I choose between the Electrical Motion2 series and the Standard series?

Electrical Motion2 is servo-controlled and allows control of force, speed and amplitude in each phase, with monitoring and traceability; Standard is pneumatic, simpler. Send us the material, part size, desired frequency and the process documentation requirement, and we recommend the series.

Do you supply Rinco equipment in Romania and within what time?

Yes. Machines and components are supplied to order, usually in 1–4 weeks. Items can ship in 24–72 h when the item is in stock, locally or at the supplier. Custom systems or special actuators may take longer, and the date is set in the quotation.

Can I replace an older Rinco generator with an ADG2?

We start from the old model, the frequency, the power, the connector and the control signals. The ADG2 series is compatible with Standard systems, but a replacement is confirmed after comparing the data. Send a photo of the nameplate and the wiring diagram for checking.

What details should I send for an ultrasonic welding or cutting quotation?

Send the material and thickness, part dimensions, type of joint or cut, cycle rate, desired frequency (20, 35 or 70 kHz) and the interface with the automated line. If you have samples, they help in choosing the sonotrode and anvil before the configuration is set.

How do I request a Rinco Ultrasonics quotation?

Send the Rinco Ultrasonics code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: RINCO ULTRASONICS AG (manufacturer documentation)