Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Schleuniger supplier in Romania

For Schleuniger we quote Cut & Strip E400 cutting and stripping machines, StripCrimp 208 machines, PullTester 20 and 320 pull-force testers and peripherals; we need the model, the series and the conductor range.

Founded in 1975 · Headquarters: Thun, Switzerland

Request a quote

Who is Schleuniger and what does it make?

Schleuniger, with its main site at Thun, Switzerland, makes semi-automatic machines for cable processing. The range includes cutting and stripping machines, crimping machines, peripheral equipment and testers for wiring quality control, among them pull-force testers.

The Cut & Strip E400 family processes wires, tubes, flat cables and multi-conductor cables, with an outer diameter of 0.8–12.5 mm and a cross-section of 0.14–16 mm². The machine cuts to length, and performs full, partial or multiple stripping and jacket stripping. It has a 10-inch colour touchscreen with S.Drive software, a coated belt drive with programmable contact pressure, and USB and Ethernet interfaces and an emergency stop circuit.

StripCrimp 208 combines stripping and crimping. It strips lengths of 0.5–15 mm, works on cross-sections of 0.05–6 mm² (AWG 30–10) and crimps with a force of 33 kN. It can be activated by a sensor or a pedal and has diagnostics for the stripping head and for the cutter for rejected parts.

The PullTester testers measure the pull-out force of crimped terminals. PullTester 20 is a motorised benchtop tester, up to 500 N, while PullTester 320 works with automatic crimping machines and measures 100, 200 and 1,000 N. Both connect through WinCrimp software to the crimp force monitor and to the crimp height measuring device. Peripherals such as CableCoiler, PreFeeder and WireStacker complete the wiring lines.

What do we supply from the Schleuniger range?

ProductDescription
Cut & Strip Family E400Semi-automatic cutting and stripping machine for wires, tubes, flat cables and multi-conductor cables, with an outer diameter of 0.8–12.5 mm and cutting lengths up to 1,000 m. The 10-inch touchscreen guides the setup and the creation of jobs.
StripCrimp 208Semi-automatic stripping and crimping machine, with stripping of 0.5–15 mm, cross-sections of 0.05–6 mm² and a crimping force of 33 kN. It also works with multi-conductor cables, and is activated by a sensor or a pedal.
PullTester testersPullTester 20, motorised benchtop, for forces up to 500 N, and PullTester 320, for automatic crimping machines, with 100, 200 and 1,000 N. They check the strength of crimped terminals and connect with WinCrimp.
Wiring peripheralsCableCoiler, PreFeeder, WireStacker and marking systems, for feeding, collecting and laying out cut cables. They are chosen according to the cable diameter and the machine they work with in the line.

Why Schleuniger?

  • Cut & Strip E400 for wires, tubes, flat cables and multi-conductor cables — one machine covers several cable types
  • StripCrimp 208 with stripping and crimping in a single machine — it reduces the number of stations in the wiring flow
  • Crimping force of 33 kN and cross-sections up to 6 mm² — it suits the usual terminals in switchboards and wiring
  • PullTester 20 and 320 with a WinCrimp link — the pull-out force is correlated with the crimping data
  • CableCoiler, PreFeeder and WireStacker peripherals — the machine fits into a complete semi-automatic flow

Which Schleuniger codes and series are requested most often?

CodeDescription
E400Cut & Strip Family, cutting and stripping machine
StripCrimp 208Stripping and crimping machine
PullTester 20Pull-out force tester, up to 500 N
PullTester 320Pull-out force tester for automatic machines
S.DriveOperating software of the E400 family
WinCrimpLink software for testers and crimp monitors
CableCoilerPeripheral equipment for coiling cables
PreFeederPeripheral feeding equipment
WireStackerPeripheral equipment for stacking cables

Where is Schleuniger equipment used?

  • Wiring harness production — cutting and stripping to length for cable harnesses
  • Electrical switchboards — crimping of terminals on conductors up to 6 mm²
  • Quality control — pull-out force testing of crimped terminals
  • Electronics and appliances — processing of thin wires and flat cables
  • Machine building — internal wiring for small-series equipment

How do we supply Schleuniger in Romania?

We can quote Schleuniger semi-automatic machines, PullTester testers and peripherals, as well as parts for existing machines. For a quotation, send the model and series from the machine nameplate, the conductor or cross-section range, the type of terminals and the type of processing. For parts, the name of the part or a photo of the assembly helps, and we confirm the matching part in the quotation. Items are supplied to order; for configured machines the lead time may be longer.

The range of conductors and terminals that the machine covers is confirmed in the quotation, based on the cross-sections and terminal types you send.

Frequently asked questions about Schleuniger

What are S.Drive, WinCrimp, CableCoiler, PreFeeder and WireStacker from Schleuniger?

S.Drive is the operating software of the E400 family, and WinCrimp is link software for testers and crimp monitors. CableCoiler, PreFeeder and WireStacker are peripheral equipment, for coiling, feeding and stacking cables.

How do I choose between the E400 and the StripCrimp 208?

The E400 cuts and strips wires, tubes, flat cables and multi-conductor cables of 0.8–12.5 mm, while the StripCrimp 208 adds crimping, on cross-sections of 0.05–6 mm², with 33 kN. If you also need crimping, send the cross-section and the terminal type.

Do you supply Schleuniger equipment in Romania, and how quickly?

Yes, equipment is supplied to order. Machines are configured on request, so the lead time may be longer than the 1–4 weeks for parts; an item can ship in 24–72 h when the item is in stock, locally or at the supplier. We confirm the lead time in the quotation.

Looking for parts or accessories for an existing StripCrimp machine — what details do I send?

Send the exact model, for example StripCrimp 208, the series from the nameplate, the name of the part and a photo of the assembly. Based on these we check the matching part and confirm it in the quotation.

Which PullTester suits my crimping machine?

PullTester 20 measures up to 500 N on the bench, while PullTester 320 is made for automatic crimping machines, with ranges of 100, 200 and 1,000 N. Send the conductor cross-section and the pull-out force required by your standard, and we choose the model.

How do I request a Schleuniger quotation?

Send the Schleuniger code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Schleuniger AG (manufacturer documentation)