Sonemat supplier in Romania
For Sonemat we quote the GS2020 adapter, the PR5000 and PR5020 units and the HWS2225-HT, HWS2250-HT and HWS2235-WCT probes; we need the material and thickness of the part, the surface temperature and the flaw detector you use.
Founded in 2005
Who is Sonemat and what does it make?
Sonemat makes electromagnetic acoustic transducers (EMAT) and the control electronics for non-contact ultrasonic non-destructive testing. The range includes shear wave EMAT probes, probes for hot surfaces, the GS2020 adapter, which connects an EMAT probe to a conventional flaw detector, and the PR5000 and PR5020 transmitter-receiver units. For a quotation, send us the probe or unit code, the material tested and the surface temperature.
The advantage of the EMAT technique is that the ultrasonic wave is generated directly in the metal part, through a magnetic field and induced currents, without gel or any other couplant. The probes work on rough surfaces or surfaces with oxides and can measure wall thickness on parts in service. Shear wave probes have maximum energy between 3 and 5 MHz. For high temperatures there are three variants: HWS2225-HT, up to 200 °C, with internal thermocouple; HWS2250-HT, up to 550 °C without water cooling; HWS2235-WCT, water-cooled, for surfaces of up to 1000 °C, such as those in steelworks.
The company was founded in 2005, out of British university research in industrial ultrasonics, and supplies both standard probes and acquisition systems configured for the application. In installations in Romania, the range makes sense where conventional ultrasonic testing stops because of temperature or surface condition: hot process pipes in refineries, pressure vessels, rolling mills and the inspection of transmission pipelines. The PR5000 and PR5020 electronics can also be mounted on robotic scanning systems.
What do we supply from the Sonemat range?
| Product | Description |
|---|---|
| GS2020 EMAT adapter | Interface between an EMAT probe and an existing piezoelectric ultrasonic flaw detector, with signal averaging and automatic gain control. It is used for echo flaw detection and for thickness measurement on ferritic steel and, under certain conditions, on austenitic stainless steel. |
| PR5000 / PR5020 transmitter-receiver | Excitation and receiving units for EMAT probes, with a low-noise amplifier of +80 dB on the PR5000. PR5020 adds extra amplification and noise reduction circuits for dense materials. Both can be integrated into robotic systems and can run from the mains or from a battery. |
| High-temperature EMAT probes | HWS2225-HT works up to 200 °C and has an internal thermocouple near the active end. HWS2250-HT reaches 550 °C without water cooling, and HWS2235-WCT, water-cooled, is intended for surfaces of up to 1000 °C, for example on steel processing lines. |
| Shear wave EMAT probes | The compact shear wave probe is designed for echo testing on rough surfaces, with maximum energy between 3 and 5 MHz. The high-power variant has a stronger magnetic field and tolerates a larger distance from the part. Both work with GS2020, PR5000 and PR5020. |
Why Sonemat?
- Ultrasonics without couplant — the EMAT probe generates the wave directly in the metal, so testing works on rough, oxidised or scale-covered surfaces
- Three temperature steps — 200 °C, 550 °C and 1000 °C with water cooling, which allows thickness measurement without shutting down the plant
- The GS2020 adapter — connects EMAT probes to most existing ultrasonic flaw detectors, with automatic gain control
- Electronics for integration — PR5000 and PR5020 have compact variants for robots and scanners, with mains or battery power
- Standard probes and systems on request — the same range covers spot measurements and automatic inspection stations
Which Sonemat codes and series are requested most often?
| Code | Description |
|---|---|
| GS2020 | EMAT adapter for existing ultrasonic flaw detectors |
| PR5000 | EMAT transmitter-receiver with low-noise amplifier of +80 dB |
| PR5020 | Advanced EMAT transmitter-receiver, for dense materials and robotic systems |
| HWS2225-HT | Shear wave EMAT probe, up to 200 °C, with internal thermocouple |
| HWS2250-HT | EMAT probe for high temperatures, up to 550 °C without water cooling |
| HWS2235-WCT | Water-cooled EMAT probe, for surfaces of up to 1000 °C |
| Compact Shear Wave EMAT | Compact shear wave probe, 3–5 MHz, for echo testing |
| High Power EMAT | High-power shear wave probe, for large distances from the part |
Where is Sonemat equipment used?
- Refineries and petrochemicals — wall thickness measurement on pipes and vessels at temperature
- Steel industry — ultrasonic testing on hot semi-finished products, with water-cooled probes
- Gas and liquid transmission — pipeline inspection with EMAT techniques
- Power generation — non-destructive testing of metal components without couplant
- Non-destructive testing laboratories — automatic stations and robotic scanners
How do we supply Sonemat in Romania?
We can quote GS2020 adapters, PR5000 and PR5020 units and standard or high-temperature EMAT probes. To choose the probe correctly, we need the material of the part, the thickness range, the maximum surface temperature, its condition (oxide, scale, paint) and the model of the flaw detector you already use. Items are supplied to order, usually 1–4 weeks; for water-cooled probes or application-specific configurations, depending on the specification, the lead time can be longer. The exact lead time appears in the quotation.
Whether an EMAT probe gives a usable signal on a specific part is established on the basis of the material, the thickness and the actual surface temperature.
Frequently asked questions about Sonemat
What does Sonemat make?
Sonemat makes EMAT probes and electronics for non-contact ultrasonic testing: the GS2020 adapter, the PR5000 and PR5020 transmitter-receiver units, shear wave probes and probes for temperatures of up to 1000 °C. The range is used for thickness measurement and flaw detection on metal parts, without couplant gel.
Which EMAT probe do you choose for a hot pipe?
The choice starts from the surface temperature: HWS2225-HT up to 200 °C, HWS2250-HT up to 550 °C without cooling and HWS2235-WCT with water cooling up to 1000 °C. Wall thickness, material and the oxide layer matter too. Send us this data and the type of flaw detector used.
How long does Sonemat equipment take to reach Romania?
Sonemat probes and units are supplied to order, usually 1–4 weeks. An item can ship in 24–72 h when the item is in stock, locally or at the supplier. For an acquisition system built for your application, depending on the specification, the lead time can be longer.
Can I use Sonemat probes with the flaw detector I already have?
The GS2020 adapter is made for exactly this case: it connects an EMAT probe to a conventional piezoelectric flaw detector and adds averaging and automatic gain control. Compatibility with your instrument is checked by model, version and input connectors, before the quotation.
What data do I send for an EMAT probe quotation?
Send the code of the existing probe or unit, if you have one, the material of the part, the thickness range, the maximum surface temperature, its condition and the working mode: manual measurement or scanner mounting. For water-cooled probes, also specify the water flow available at the measurement location.
How do I request a Sonemat quotation?
Send the Sonemat code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: Sonemat Ltd (manufacturer documentation)

