Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Tapmatic supplier in Romania

For Tapmatic we quote SynchroFlex II chucks, TA and TIC compensating chucks, RDT and RxII reversing heads and Rubber Flex collets; we need the model, the shank and the tap range.

Founded in 1952 · Headquarters: Post Falls, Idaho, USA

Request a quote

Who is Tapmatic and what does it make?

Tapmatic Corporation has been making devices and tool holders for tapping since 1952: SynchroFlex chucks for synchronous tapping on CNC machines, chucks with tension and compression compensation, automatic reversing tapping heads for machining centres and drilling machines, plus marking heads and a deburring tool for CNC. Its headquarters are in Post Falls, Idaho, and the quality system holds certifications according to the manufacturer's documentation. For a quotation, send us the model (for example SynchroFlex II, TA, RDT or RxII), the shank type and the tap range used.

The problem Tapmatic solves is the inevitable difference between the synchronised feed of the machine and the real pitch of the tap. SynchroFlex absorbs this difference with a precisely machined elastic element, which compensates axially without transmitting torque, so the tap works with low axial forces and the thread comes out cleaner. The synchronous tapping range has six sizes, for taps from M1 to M48, with modular straight shank, integral HSK, Tapmatic Capto or steep taper, with ER collet or quick change, with internal coolant or with minimum quantity lubrication (MQL).

When the machine has no rigid tapping cycle, the SM, TA and TIC chucks offer greater tension and compression compensation and can work on CNC lathes, machining centres or conventional machines. The RDT and RCT heads reverse the direction automatically on retraction, without the machine spindle stopping and starting twice for every hole, which shortens the cycle on parts with many threads. For drill presses and for pneumatic, hydraulic or electric spindles there are the RxII and 90xII heads, with an adjustable torque limiter and a return speed 1.75 times higher, and Drill-n-Tap 50 for drilling and tapping with the same head.

What do we supply from the Tapmatic range?

ProductDescription
SynchroFlex II synchronous tapping chucksTool holders with fine axial compensation for the synchronous tapping cycles of CNC centres. They are supplied with modular straight shank, HSK, Tapmatic Capto or steep taper, with ER collet or quick change, with internal coolant or MQL, plus an extended-length version.
SM, TA, TIC chucks with tension and compression compensationFor machines without a rigid cycle: SM with Rubber Flex or ER collets, TA and TIC with quick tap change without keys. TA and TIC release the adaptor if the tension travel is exceeded and use P adaptors with positive drive or TC adaptors with torque limiting.
RDT and RCT automatic reversing tapping headsHeads for CNC that reverse the direction of the tap when the machine retracts, with the spindle turning continuously in one direction. They are mounted on CAT, BT or SK steep taper, through a modular shank, or directly on HSK, for parts with a large number of threaded holes.
RxII, 90xII and Drill-n-Tap 50 manual headsAutomatic reversing heads for drilling machines and automated spindles, with an adjustable torque limiter, a return 1.75 times faster and Rubber Flex collets. Drill-n-Tap 50 allows centre drilling, drilling and tapping without changing the head between operations.

Why Tapmatic?

  • Axial compensation without torque transmission on SynchroFlex II — low axial forces on the tap and a more accurate thread
  • Six sizes for taps M1–M48 — the same family covers fine threads up to large threads
  • Modular straight shanks, HSK, Tapmatic Capto and steep taper — the tool holder fits the existing spindle
  • RDT and RCT automatic reversing heads — the spindle no longer stops and reverses at every hole
  • Adjustable torque limiter on RxII and 90xII — protects the tap when tapping on drilling machines

Which Tapmatic codes and series are requested most often?

CodeDescription
SynchroFlex IISynchronous tapping chuck with fine axial compensation
SynchroFlex II HSKSynchronous chuck with HSK shank, ER collet and internal coolant
SynchroFlex II MQLSynchronous HSK chuck for minimum quantity lubrication
SMChuck with tension and compression compensation, Rubber Flex or ER collet
TACompensating chuck with quick change, straight shank or Morse taper
TICCompensating chuck with quick change and internal coolant
RDTAutomatic reversing tapping head for CNC
RCTAutomatic reversing tapping head, on steep taper or HSK
RxIIAutomatic reversing tapping head for drilling machines
90xIIAutomatic reversing tapping head, with Rubber Flex collet
Drill-n-Tap 50Head for drilling and tapping, with quick-change chuck
DeBurr-ZDeburring tool for CNC, straight shank and ER collet
TapWriterDot marking head for CNC
ER-GBER collet for taps

Where is Tapmatic equipment used?

  • CNC series production — synchronous tapping with SynchroFlex II on machining centres
  • CNC turning — SM and TA compensating chucks on lathes without a rigid cycle
  • Maintenance workshops — tapping on drill presses with RxII and 90xII
  • Automated lines — automatic reversing heads on pneumatic, hydraulic or electric spindles
  • Metal parts manufacturing — deburring on CNC with DeBurr-Z and marking with TapWriter

How do we supply Tapmatic in Romania?

We can quote SynchroFlex II chucks, SM, TA and TIC chucks, RDT, RCT, RxII and 90xII heads, as well as ER collets, Rubber Flex collets and P or TC adaptors. For a correct quotation we need the model on the tool holder, the shank type (HSK, Capto, CAT, BT or Morse taper), the tap range and the type of coolant. Items can ship in 24–72 h when the item is in stock, locally or at the supplier; the others are brought in to order, usually in 1–4 weeks. We confirm the exact lead time in the quotation.

We quote Tapmatic tool holders and tapping heads, while the tapping cycle parameters on the machine and the choice of tap are set by your programmer and process engineer.

Frequently asked questions about Tapmatic

What does Tapmatic make?

Tapmatic makes in Post Falls, Idaho, tool holders and heads for tapping: SynchroFlex II chucks for synchronous tapping, SM, TA and TIC compensating chucks, RDT, RCT, RxII and 90xII automatic reversing heads, ScribeWriter, TapWriter and MH marking heads, the DeBurr-Z deburring tool and accessories such as ER and Rubber Flex collets.

When do I choose SynchroFlex and when a TA or SM compensating chuck?

SynchroFlex II is used when the machine has a synchronous (rigid) tapping cycle and needs only very small axial compensation. If the machine has no such cycle, for example an older lathe or a conventional machine, SM, TA or TIC are chosen, which have a longer travel in tension and compression. Tell us the machine and the taps used.

Do you supply Tapmatic products in Romania and how fast?

Yes. Items can ship in 24–72 h when the item is in stock, locally or at the supplier. Chucks with a particular HSK or Capto shank are brought in to order, usually 1–4 weeks, and depending on the specification the lead time can be longer. We confirm the exact date in the quotation.

I have an old Tapmatic tapping head. Can you find a model that replaces it?

Tapmatic has a correspondence table between old and current models, and the RxII and Drill-n-Tap series are the new generation of heads for drilling machines. Send us the inscription on the body, the shank type and the tap range, and we identify the current model that fits the same machine.

What data do I send for a quotation on Tapmatic chucks?

The model on the tool holder (for example SynchroFlex II, TA or RCT), the shank type and size (HSK, Capto, CAT, BT, SK or Morse taper), the tap range (for example M3–M12), the type of coolant (internal, MQL or none) and the quantity. If you also need ER-GB or Rubber Flex collets, list the sizes in the same request.

How do I request a Tapmatic quotation?

Send the Tapmatic code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Tapmatic Corporation (manufacturer documentation)