Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Tinius Olsen supplier in Romania

For Tinius Olsen we quote universal machines from the ST, L and SL series, IT406 impact pendulums, MP1200 and MP1500 plastometers and HDVT3 and HDVT6 instruments, based on the maximum force, the test standard and the accessories required by the laboratory.

Founded in 1880

Request a quote

Who is Tinius Olsen and what does it make?

Tinius Olsen has made equipment for mechanical and thermal testing of materials since 1880: universal machines for tension, compression, bending and shear testing, Charpy and Izod impact pendulums, melt flow rate instruments for polymers, instruments for heat deflection temperature under load (HDT) and Vicat softening temperature, hardness testers, extensometers, gripping devices and the Horizon software for controlling the test and processing the results. These are laboratory and quality control instruments, used for metals, plastics, rubber, textiles, adhesives, packaging and fasteners.

The universal machines are grouped by maximum force. The ST series has two ranges, 1–50 kN and 100–300 kN, the L series covers 5–50 kN, the MHT series 5–300 kN, and the SL series rises from 300 up to 3000 kN, for large specimens and assemblies. The same frame can be completed with extensometers, furnaces and chambers for high or low temperatures, safety guards and gripping devices for specimens of different shapes. The IT406 pendulums, with a maximum energy of 406 J, switch from the Charpy to the Izod configuration and comply with ASTM E23 and EN ISO 148-2 and 148-3.

Such machines work in quality control laboratories in the metallurgical and plastics industries, at research institutes, in material acceptance laboratories and in technical faculties. For a replacement or an extension, what matters is the maximum force, the type of grip, the standard in use (ISO, ASTM or EN) and the software version, which is why the quotation starts from the exact model and from the list of tests the laboratory has to cover.

What do we supply from the Tinius Olsen range?

ProductDescription
Universal testing machines, ST, L, MHT and SL seriesTension and compression machines from 1 kN to 3000 kN: the ST series in two ranges (1–50 kN and 100–300 kN), the L series (5–50 kN), the MHT series (5–300 kN) and the SL series (300–3000 kN). They perform tension, compression, bending, shear, puncture, tear and peel tests.
IT406 impact pendulumA pendulum with a maximum energy of 406 J, for the impact toughness of metals. It switches from the Charpy to the Izod configuration, has 55 speed and energy levels, with friction and windage losses below 0.5% of range, and complies with ASTM E23 and EN ISO 148-2 and 148-3. Optionally it has an electric brake and an interlocked enclosure.
Melt flow rate instruments, MP1200 and MP1500Extrusion plastometers for the melt mass-flow rate (MFR), complying with ASTM D1238 and ISO 1133. The MP1200 exists in a manual and a motorised version, and the MP1500 applies the load through a load cell, without weights.
HDT and Vicat instruments, HDVT3 and HDVT6Instruments for heat deflection temperature under load (ASTM D648, ISO 75) and Vicat softening temperature (ASTM D1525, ISO 306), with a resolution of 0.001 mm for measuring deformation and penetration, immersed in a heating bath.

Why Tinius Olsen?

  • Universal machines in five force ranges — from 1 kN to 3000 kN, so that the same laboratory can move up in capacity without changing the software family
  • Reconfigurable Charpy and Izod impact pendulum — the 406 J IT406, to ASTM E23 and EN ISO 148-2/148-3, for the impact toughness of steels and alloys
  • Instruments for polymers in the same family — melt flow rate (MP1200, MP1500) and HDT/Vicat (HDVT3, HDVT6) for plastics laboratories
  • The same software for most instruments — Horizon controls the test, stores the results and produces reports for several types of instruments
  • Accessories for testing in special conditions — furnaces, temperature chambers, extensometers and gripping devices for different specimens

Which Tinius Olsen codes and series are requested most often?

CodeDescription
ST (1–50 kN)Universal testing machines, low force range
ST (100–300 kN)Universal testing machines, medium force range
SL (300–3000 kN)Universal machines for high forces
L (5–50 kN)Universal machines, L series
MHT (5–300 kN)Universal machines, MHT series
IT406406 J Charpy/Izod impact pendulum, for metals
MP1200Extrusion plastometer, manual or motorised version
MP1500Plastometer with the load applied through a load cell
HDVT3HDT/Vicat instrument, ASTM D648, ISO 75, ASTM D1525, ISO 306
HDVT6HDT/Vicat instrument from the same family

Where is Tinius Olsen equipment used?

  • Metallurgy and steels — tension and impact toughness tests at the acceptance laboratory
  • Plastics and polymers — melt flow rate, HDT and Vicat for batch control
  • Rubber, textiles and packaging — tear, peel and puncture resistance
  • Fasteners and steel structures — tests on bolts and assemblies
  • Research and technical education — strength of materials laboratories

How do we supply Tinius Olsen in Romania?

We can quote universal testing machines, impact pendulums, melt flow rate instruments and HDT/Vicat instruments from the Tinius Olsen range, supplied to order. The lead time is usually 1–4 weeks to order and, depending on the specification, can be longer for configurations with furnaces, chambers or extensometers. For a correct quotation, send us the desired maximum force, the type of test, the standard applied, the specimen dimensions, the accessories needed (grips, extensometer, temperature chamber) and, for an existing instrument, the code and year from the nameplate.

The suitable series is established from the maximum force and the test standard, and calibration and the metrological certificate are requested separately for each instrument.

Frequently asked questions about Tinius Olsen

What does Tinius Olsen make?

Tinius Olsen has made materials testing machines since 1880: universal tension and compression machines from 1 to 3000 kN, impact pendulums, melt flow rate instruments, HDT/Vicat instruments, hardness testers, extensometers and gripping devices; the Horizon software controls the test on most instruments.

How do I choose the maximum force of a universal machine?

We start from the breaking force of the strongest specimen you test and add a margin, because accuracy drops towards the lower end of a load cell. Send us the material, the specimen section and the standard, and we determine whether the ST, L or SL series is suitable.

How long does it take to supply Tinius Olsen equipment?

It is supplied to order, usually in 1–4 weeks for Tinius Olsen items. Depending on the specification, the lead time can be longer for machines with a furnace, temperature chamber or extensometer; we confirm the exact lead time in the quotation.

Can I replace an old impact pendulum with the IT406?

The replacement depends on the energy required, on the Charpy or Izod configuration and on the standard applied, for example ASTM E23 or EN ISO 148. Equivalence is confirmed after we compare the data; send the nameplate of the current instrument and the type of specimens, and we check the suitable version.

What data do I send for a quotation on an HDT/Vicat instrument?

Send the standard you work to (ISO 75, ISO 306, ASTM D648 or D1525), the number of specimens tested simultaneously, their dimensions and whether you already have a heating bath or a compatible computer. For an existing instrument, add the code from the nameplate.

How do I request a Tinius Olsen quotation?

Send the Tinius Olsen code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Tinius Olsen (manufacturer documentation)