Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

walter+bai supplier in Romania

For walter+bai we quote LFM, LFE, TTM, UTM and LFV testing machines, CHV pendulums and PCS8000 controllers, plus upgrade packages for existing machines; for a quotation we need the maximum force, the test standard and the type of specimens.

Founded in 1970 · Headquarters: Löhningen, Switzerland

Request a quote

Who is walter+bai and what does it make?

walter+bai is a Swiss manufacturer based in Löhningen and active since 1970, making materials testing machines and systems: universal machines for static tests, dynamic and fatigue systems, axial-torsional machines, bending and impact machines, machines for construction materials, actuators and hydraulic power units. In a laboratory, a universal machine measures the tensile, compressive and bending strength of a material, while dynamic systems repeat the loading cyclically to find the fatigue limit.

Static tests are covered by the electromechanical series LFM-L (single column), LFM-Top (table-top, up to 125 kN), LFM with a floor-standing frame up to 125 kN, from 150 to 400 kN and from 600 to 2,500 kN, with 6 columns, plus LFE and LFM-C with a central spindle. The servohydraulic range includes TTM up to 5,000 kN, LF and LFSV up to 1,000 kN and UTM up to 3,000 kN, with two test spaces. LFMHybrid combines electromechanical and servohydraulic drive. For fatigue, LFV covers up to 630 kN, and the high-capacity version up to 5,000 kN; LFV-L and compact LFV go up to 50 kN, and LFV-E, electrodynamic, up to 12 kN. CHV pendulum impact machines are available for 50, 75 and 900 J, in accordance with ISO 148-1 and ASTM E23.

Older machines can also be upgraded with the PCS8000 digital controller and Dion7 software, keeping the existing grips, load cells and extensometers. The range is of interest to materials, concrete and cement, metallurgy and construction laboratories, as well as component testing centres.

What do we supply from the walter+bai range?

ProductDescription
LFM, LFE and LFM-C electromechanical universal machinesLFM-L with one column, table-top LFM-Top (up to 125 kN), floor-standing LFM of 125, 150–400 and 600–2,500 kN, LFE with a central spindle, oil-free, and LFM-C with a central spindle. They are used for tension, compression and bending, from research to high-volume quality control.
TTM, LF, LFSV and UTM servohydraulic machinesTTM up to 5,000 kN for tests of high capacity and strength, compact LF and LFSV up to 1,000 kN and UTM up to 3,000 kN, with two test spaces. The LFMHybrid series combines electromechanical with servohydraulic drive.
Dynamic and axial-torsional systemsLFV for fatigue and monotonic tests (up to 630 kN, and the high-capacity version up to 5,000 kN), LFV-L and compact LFV up to 50 kN, electrodynamic LFV-E up to 12 kN and the LFM-L, LFM-T and LFV-T series for axial-torsional tests.
Impact, controllers and upgradesCHV pendulums of 50, 75 and 900 J, the PCS8000 digital controller and Dion7 software, the Digicon4000 controller for construction materials and upgrade packages for electromechanical machines from any manufacturer.

Why walter+bai?

  • Electromechanical LFM, LFE and LFM-C series — from table-top machines up to 125 kN to 6-column frames of 600–2,500 kN
  • Servohydraulic TTM, LF, LFSV and UTM — capacities up to 5,000 kN, and the UTM has two test spaces for tension, compression and bending without removing the grips
  • Dynamic systems LFV, LFV-L, LFV-E and LFMHybrid — from 12 kN electrodynamic up to 5,000 kN servohydraulic, for fatigue and monotonic tests
  • Upgrading of electromechanical machines, regardless of manufacturer — PCS8000 controller and Dion7 software, keeping the grips and sensors
  • CHV impact machines of 50, 75 and 900 J — compliant with ISO 148-1 and ASTM E23, for Charpy and Izod

Which walter+bai codes and series are requested most often?

CodeDescription
LFM-LSingle-column electromechanical machine, low capacity
LFM-TopTable-top electromechanical machine, up to 125 kN
LFM 600–2500 kNFloor-standing electromechanical machine, 6 columns
LFEElectromechanical machine with central spindle, oil-free
LFM-CTable-top electromechanical machine with central spindle
LFMZServoelectric machine for low-cycle fatigue
TTMServohydraulic machine up to 5,000 kN
LF / LFSVCompact servohydraulic machines up to 1,000 kN
UTMServohydraulic machine up to 3,000 kN, two test spaces
LFMHybridHybrid electromechanical and servohydraulic system
LFVServohydraulic fatigue system, up to 630 kN
LFV-EElectrodynamic system, up to 12 kN
CHV 75 JCharpy impact pendulum, ISO 148-1, ASTM E23
CHV 900 JImpact pendulum, table-top or floor-standing
PCS8000Modular high-speed digital controller
Digicon4000Controller for construction materials

Where is walter+bai equipment used?

  • Materials laboratories — static and fatigue tests on metals, plastics and components
  • Construction materials — machines for cement, concrete, rock, wood, asphalt and soil
  • Metallurgy — tensile, bending and impact tests on steel
  • Automotive and aerospace — axial-torsional and multiaxial tests on components
  • Upgrading of existing laboratories — new controllers on older electromechanical machines

How do we supply walter+bai in Romania?

We can quote walter+bai machines from the LFM, LFE, LFM-C, TTM, UTM, LFV, LFV-E and CHV series, the PCS8000 and Digicon4000 controllers, and upgrade packages for existing electromechanical machines. We supply walter+bai to order, usually in 1–4 weeks; for special configurations, depending on the specification, the lead time can be longer, and the exact date is confirmed in the quotation. For a correct request, send the maximum force, the material and the type of specimens, the test standard, the accessories needed (extensometers, temperature chambers, grips) and, for an existing machine, the make, model and serial number.

The upgrade of an old machine is determined from the make, model, series and the condition of the threaded spindles and bearings.

Frequently asked questions about walter+bai

What does walter+bai make?

walter+bai makes materials testing machines and systems in Switzerland: electromechanical and servohydraulic universal machines, dynamic and fatigue systems, axial-torsional machines, impact pendulums, machines for construction materials, actuators, hydraulic units and digital controllers.

How do I choose between an electromechanical LFM machine and a servohydraulic one?

The electromechanical LFM series covers everything from table-top machines up to 2,500 kN and is chosen for static tests. The servohydraulic TTM, UTM and LF/LFSV go up to 5,000 kN, and the LFV systems are chosen for fatigue. Send us the maximum force, the material and the type of test.

Do you supply walter+bai machines in Romania, and how quickly?

Yes, we supply walter+bai to order, usually in 1–4 weeks. Depending on the specification, the lead time can be longer, especially for high-capacity machines or with special accessories; the date is confirmed in the quotation.

Can an older electromechanical machine be upgraded?

An electromechanical machine can be upgraded, regardless of manufacturer, if the threaded spindles and bearings are in good condition: the controller and, if needed, the drive are replaced, while the existing grips and load cells are generally kept. Send us the make, model and serial number.

What data do I need to send for a quotation on a testing machine?

Send the maximum force wanted, the type of tests (tension, compression, bending, fatigue, torsion), the material and dimensions of the specimens, the standard followed, the accessories (extensometers, temperature chambers, grips), the space available in the laboratory and, if there is one, the controller or software the laboratory wants to keep.

How do I request a walter+bai quotation?

Send the walter+bai code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: walter+bai (manufacturer documentation)