Vollmer supplier in Romania
For Vollmer we quote VBM, VBK and VBF contact thickness gauges, the VTLG laser thickness gauge, X-ray thickness gauges and the BFI flatness roll; we need the device code, its position on the line and the strip thickness range.
Headquarters: Hagen, Germany
Who is Vollmer and what does it make?
Vollmer makes strip thickness and flatness measuring devices for cold rolling mills and for processing lines for steel, aluminium and copper strip, and is based in Hagen, Germany. The range includes contact, laser and X-ray or isotope thickness gauges, flatness measuring rolls and AGC (automatic thickness control) systems, which use the thickness gauge signal for correction in the mill stand. For a quotation, send us the device type from the nameplate, its position on the line, the strip thickness and width and the rolled material.
The contact thickness gauges of the VBM, VBK and VBF series have two diamond-tip transducers, which touch the top and bottom faces of the strip simultaneously; the result is the absolute thickness, without alloy compensation, for strip from 0.005 to 19 mm, with an accuracy of up to ±0.5 µm. The VTLG thickness gauge measures without contact, by laser triangulation with two synchronised sensors, scans at up to 80 kHz and works even in the mill stand, in rolling oil mist, on strip of up to 180 °C. The radiometric devices have a C-frame, an X-ray tube or an isotope source (Co-57, Am-241) and a digital detector with an ionisation chamber; the source sits in a tungsten drawer that is removed as a closed unit.
The BFI flatness roll has quartz piezoelectric sensors mounted in axial bores and sends the signal optically to the control cabinet, for strip of at least 0.005 mm and speeds of up to 6 m/s. The range is completed by segmented rolls, automatic flatness control and offline devices for the cross profile. The equipment is installed in cold rolling mills, on annealing, pickling and galvanising lines, on slitting lines and in steel service centres.
What do we supply from the Vollmer range?
| Product | Description |
|---|---|
| VBM, VBK, VBF contact thickness gauges | Two diamond-tip transducers measure the distance to the top face and the bottom face of the strip, and their sum gives the absolute thickness. The series cover strip from 0.005 to 19 mm; the VBF 1018 reaches ±0.5 µm, the VBK 512 also measures the width of narrow strip. |
| VTLG — laser thickness gauge | Two laser sensors on a rigid C-frame measure the distance to the faces of the strip; the thickness results from the fixed distance between the sensors minus the two air gaps. The result does not depend on the alloy, the scanning frequency reaches 80 kHz, and the device works in the mill stand. |
| X-ray and isotope radiometric thickness gauges | An X-ray tube or isotope source on one arm of the C-frame, a digital detector with an ionisation chamber on the other. Measurement is continuous, contactless, suited to coated strip; alloy differences are compensated in the evaluation, and some frames are only 120 mm wide. |
| BFI flatness roll | Roll with quartz piezoelectric sensors positioned at 90°, with optical signal transmission, without purge air or active cooling. It works at speeds of up to 6 m/s and strip temperatures of 180 °C, with standard measuring zones of 26 or 52 mm. |
Why Vollmer?
- VBM, VBK and VBF contact thickness gauges for 0.005–19 mm — absolute thickness, without alloy compensation when the material changes
- VTLG with laser, contactless — installed in the mill stand, in oil mist, on strip of up to 180 °C
- X-ray or isotope thickness gauges — contactless measurement on coated and multilayer strip, with a response in the millisecond range for the AGC loop
- Tungsten drawer for the radiation source — the source is removed as a closed unit, which eases maintenance and transport
- BFI roll with piezoelectric sensors — flatness is measured continuously, with a TCP/IP or PROFINET link to the line controller
Which Vollmer codes and series are requested most often?
| Code | Description |
|---|---|
| VBF 1018 | Contact thickness gauge, accuracy of up to ±0.5 µm |
| VBM 1063 | Contact thickness gauge with motorised positioning over the line height |
| VBM XX65 | Contact thickness gauge with self-calibration plate |
| VBK 512 | Contact thickness gauge for thickness and width, narrow strip and flat wire |
| VTLG | Contactless laser thickness gauge, scanning at up to 80 kHz |
| BFI | Flatness measuring roll with quartz piezoelectric sensors |
| Segment roll | Segmented roll for strip flatness measurement |
| AGC | Automatic thickness control system, fed by the thickness gauge signal |
Where is Vollmer equipment used?
- Steel cold rolling mills — thickness gauges in the mill stand and automatic thickness control
- Aluminium and copper rolling mills — measurement of thin foils, from 0.005 mm
- Annealing, pickling and galvanising lines — checking thickness after treatment
- Slitting lines and steel service centres — thickness of the master coil strip and of the slit strips
- Hot rolling mills — offline measurement of the cross profile on samples cut from the coil
How do we supply Vollmer in Romania?
We quote Vollmer contact, laser and radiometric thickness gauges, BFI rolls, spare parts for devices already installed and components for upgrading the thickness control loop. For an accurate quotation, send us the device type from the nameplate (for example VBM 1063 or VTLG), its position on the line, the thickness and width range of the strip, the material and, for radiometric thickness gauges, the source type. The devices are supplied to order, usually in 1–4 weeks; a spare part can ship in 24–72 h when the item is in stock, locally or at the supplier. For systems configured for a line, the lead time may be longer, depending on the specification; we specify it in the quotation.
The compatibility of a new thickness gauge with the automation of an existing line is established based on the control loop diagram and the communication protocol used.
Frequently asked questions about Vollmer
What does Vollmer make?
Vollmer makes devices for measuring strip thickness and flatness in rolling mills: contact, laser and X-ray or isotope thickness gauges, BFI flatness rolls, automatic thickness control systems and offline devices for the cross profile. All are designed for steel, aluminium and copper lines.
How do I choose between a contact, a laser and an X-ray thickness gauge?
Contact and laser give the absolute thickness, without alloy compensation; contact covers 0.005–19 mm, and the VTLG laser works without touching, on strip of up to 180 °C. X-rays or isotopes are chosen for coated or multilayer strip, with alloy compensation. Send us the material, the thicknesses and the position on the line.
Do you supply Vollmer devices in Romania, and within what time?
Yes: Vollmer thickness gauges reach Romania to order. For a complete device allow usually 1–4 weeks; a spare part can ship in 24–72 h when the item is in stock, locally or at the supplier. For line upgrades, the lead time depends on the specification and may be longer.
Can I replace only a part of an older contact thickness gauge?
Often yes: for the VBM, VBK and VBF contact thickness gauges we first check whether the faulty transducer or module is still manufactured. Send us the device nameplate, the year of commissioning and a photo of the transducers, and we look for the original item or the current version that fits.
What data should I send for a BFI flatness roll quotation?
The maximum strip width, the minimum thickness, the line speed, the strip temperature, the mounting position and the desired interface to the controller (TCP/IP or PROFINET). The roll works up to 6 m/s and 180 °C, with strip from 0.005 mm, and the standard measuring zones are 26 or 52 mm.
How do I request a Vollmer quotation?
Send the Vollmer code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: Friedrich Vollmer Skandinavien, Vollmer Metals Solutions GmbH (manufacturer documentation)

