Makishinko supplier in Romania
For Makishinko we quote worm gearboxes of the MA and S series, screw jacks JA and JB, bevel jacks NX and BX, bevel gearboxes SB, FB and TB and DFA phase adjusters; the item is identified by series and size.
Headquarters: Osaka, Japan
Who is Makishinko and what does it make?
Makishinko is a Japanese manufacturer of gearboxes and motion transmission components, based in Osaka. The range covers worm gearboxes, screw jacks, bevel gearboxes, differential phase-adjusting gearboxes and a series of drive parts. The applications are those where a motor has to turn or lift a load through a gear train: material handling equipment, lifting mechanisms, lifts, agricultural and industrial machines.
Worm gearboxes are divided by number of stages. The MA and S series are single-stage, MAH and H are two-stage, and MAF and F-U are worm-helical combinations. The small MA series has a centre distance of 32 and 40 mm, while the S series reaches 17 sizes, from 50 to 500 mm. A single stage usually reduces up to 1:60, and up to 1:120 for special applications. Shaft arrangements are numerous, which helps with installation in a given space.
Screw jacks come in trapezoidal-thread versions, JA, JAH, JAS and JTA, and ball-screw versions, JB, JBH and JTB. The bevel jacks NX and BX, with capacities of 20 and 50 kN, complete the offer. The bevel gearboxes are called SB, with spiral teeth, FB, with straight teeth, and TB, with an aluminium alloy housing and factory-sealed grease. For a quotation the series, size, transmission ratio and shaft arrangement matter.
What do we supply from the Makishinko range?
| Product | Description |
|---|---|
| MA, S, MAH, H worm gearboxes | The MA and S series are single-stage right-angle gearboxes with ratios between 10 and 60. The S series runs from a centre distance of 50 mm up to 500 mm. MAH and H are the two-stage versions for higher transmission ratios. |
| MAF and F-U worm-helical gearboxes | They combine a worm stage with a helical stage, for high reduction ratios. The series is chosen by size, ratio and shaft arrangement, and the exact type is confirmed from the nameplate of the existing gearbox. |
| JA, JB screw jacks and NX, BX bevel jacks | JA, JAH, JAS and JTA use a trapezoidal thread, while JB, JBH and JTB use a ball screw. The NX bevel jacks, with trapezoidal thread, and BX, with ball screw, have capacities of 20 and 50 kN. Push and pull loads are rated equally. |
| SB, FB, TB bevel gearboxes | SB has spiral bevel gears and 50 shaft configurations, FB has straight teeth and tapered roller bearings, and TB has an aluminium alloy housing, factory-sealed grease and can be mounted in any position. |
Why Makishinko?
- Worm gearboxes with one or two stages — the stage is chosen according to the transmission ratio the mechanism requires
- Jacks with trapezoidal thread or ball screw — selected according to cycle frequency and positioning accuracy
- SB, FB and TB bevel gearboxes — from cast iron housings for heavy loads to a light housing with sealed-in grease
- DFA differential phase adjusters — allow the timing between two mechanical elements to be adjusted, even while running
- Jack options: bellows, motor or gear motor, encoder and cam or counter limit switches — the complete package is ordered together
Which Makishinko codes and series are requested most often?
| Code | Description |
|---|---|
| MA | Single-stage worm gearbox, small and medium version |
| S | Single-stage worm gearbox, 17 sizes |
| MAH | Two-stage worm gearbox |
| H | Two-stage worm gearbox |
| MAF | Worm-helical gearbox |
| JA | Screw jack, trapezoidal thread |
| JTA | Screw jack, trapezoidal thread |
| JB | Ball screw jack |
| JTB | Ball screw jack |
| NX | Bevel jack with trapezoidal thread, 20 and 50 kN |
| BX | Bevel jack with ball screw, 20 and 50 kN |
| SB | Bevel gearbox with spiral teeth |
| FB | Bevel gearbox with straight teeth |
| TB | Bevel gearbox with aluminium housing |
| DFA | Differential phase adjuster, sizes 05, 1, 2, 3, 5, 7 |
| GE | Series of drive parts, 0.1–2.2 kW |
Where is Makishinko equipment used?
- Material handling — driving conveyors and rotary storage systems
- Lifting mechanisms — screw jacks with trapezoidal thread or ball screw
- Agricultural and industrial machines — bevel gearboxes with straight teeth
- Mechanisms with synchronised elements — phase adjustment with differential adjusters
- Lifts and low-noise equipment — quiet-running worm gearboxes
How do we supply Makishinko in Romania?
We can quote Makishinko worm gearboxes, screw jacks, bevel gearboxes and phase adjusters, including replacement items for an existing installation. For a correct quotation send the series and size from the nameplate, the transmission ratio, the speed and motor power, the shaft type and the mounting position; for jacks add the load, the stroke and the thread type. Items are supplied to order, usually in 1–4 weeks, and the exact lead time is stated in the quotation.
We confirm the suitable series in the quotation on the basis of the nameplate, because some designations have variants with different shaft arrangements.
Frequently asked questions about Makishinko
What are the MA, S, JA, JB and SB series at Makishinko?
Makishinko makes worm gearboxes, screw jacks, bevel gearboxes and differential phase adjusters, all for motion transmission in machinery. The MA and S series are single-stage worm gearboxes, JA and JB are jacks, and SB, FB and TB are bevel gearboxes. The company is based in Osaka.
How do I choose between a trapezoidal-thread jack and a ball-screw jack?
The JA, JAH, JAS and JTA jacks have a trapezoidal thread, while JB, JBH and JTB have a ball screw. The ball screw is chosen for frequent cycles and precise positioning, the trapezoidal thread for less frequent loads. Send the load, stroke, cycle frequency and working position, and we check the series.
Do you supply Makishinko in Romania and how fast?
Yes, items are supplied to order, and the usual lead time is 1–4 weeks. An item can ship in 24–72 h when the item is in stock, locally or at the supplier. Depending on the series and the specification, the lead time can be longer; we confirm the exact date in the quotation.
Can I replace an existing worm gearbox with a Makishinko one?
It is possible if the size, ratio and shaft arrangement match. Send the nameplate of the current gearbox, the centre distance, the ratio, the input speed and the mounting position, plus the output shaft dimensions. On this basis we check whether there is an MA or S series that fits.
What data do you need for an SB, FB or TB bevel gearbox?
For SB, FB or TB send the series or the code from the nameplate, the transmission ratio, the input speed and power, the shaft configuration and the mounting direction. TB can be mounted in any position, while FB and SB have a cast iron housing and an oil bath. With this data we prepare the quotation.
How do I request a Makishinko quotation?
Send the Makishinko code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: MAKISHINKO CO.,LTD. (manufacturer documentation)

