Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Max-Air supplier in Romania

For Max-Air we quote MT, UT and SS rack and pinion pneumatic actuators, AG and HD scotch yoke actuators, solenoid valves, limit switch boxes, positioners and Max-Electric electric actuators.

Headquarters: Agrate Brianza, Italy

Request a quote

Who is Max-Air and what does it make?

Max-Air makes pneumatic actuators and automation accessories for quarter-turn valves, headquartered in Agrate Brianza, Italy. The pneumatic actuator turns a ball, butterfly or plug valve between the open and closed positions, while the accessories control it and report its position.

For rack and pinion actuators, the programme includes the aluminium MT series, with two ISO flange hole patterns in the body, NAMUR mounting for accessories and a patented ±10° adjustment at both ends of travel. The UT series has a detachable flange, SS is made of stainless steel, with travel stops that allow up to 110° in a 90° actuator, and UT 180° exists in double acting and spring return versions, including centre return or three positions. The engineering polymer UT, double acting, resists hydrocarbons, solvents and fuels.

For high torques there are scotch yoke actuators: the AG series, with torques between 1,067 and 46,000 Nm, for temperatures from −40 to 150 °C, in pneumatic or hydraulic versions, and the HD series, in symmetric (SHD) and canted (CHD) configurations. The accessories include solenoid valves, limit switch boxes, positioners, air preparation units and manual gearboxes, while Max-Electric adds electric actuators. For a quotation, what matters is the series, the type of action and the torque.

What do we supply from the Max-Air range?

ProductDescription
MT and UT aluminium actuatorsRack and pinion pneumatic actuators. MT has two ISO hole patterns in the body, NAMUR mounting for accessories and ±10° adjustment at open and closed. UT has a detachable flange for integration with the valve and the same patented adjustment.
SS stainless steel and UT engineering polymer actuatorsThe stainless steel SS series resists corrosion and has double travel stops, which allow up to 110° in a 90° actuator. The engineering polymer UT, double acting, resists hydrocarbons, solvents and fuels and is made in three sizes.
UT 180° and AG and HD scotch yoke actuatorsUT 180° exists in double acting and spring return versions, including three positions. The AG series covers torques between 1,067 and 46,000 Nm, at temperatures from −40 to 150 °C, and HD, in symmetric and canted configurations, is for large quarter-turn valves.
Accessories and Max-Electric electric actuatorsSolenoid valves, limit switch boxes, positioners, air preparation, manual gearboxes and mounting elements. Max-Electric brings electric actuators in Standard/Heavy Duty, Light Duty, Industrial, spring return and classified area versions.

Why Max-Air?

  • Rack and pinion actuators in aluminium, stainless steel and engineering polymer — the material is chosen by the environment in the installation, from water to hydrocarbons
  • Patented ±10° adjustment at the ends of travel on the MT and UT series — the valve position can be fine-tuned at commissioning
  • Spring return variants, including centre return or three positions on the UT 180° — they cover cases where the valve must return to a safe position
  • AG and HD scotch yoke actuators for high torques — used on large ball, butterfly or plug valves
  • Solenoid valves, limit switches, positioners and gearboxes in the same family — the automation package is ordered together

Which Max-Air codes and series are requested most often?

CodeDescription
MTAluminium rack and pinion pneumatic actuator with NAMUR mounting
UTAluminium pneumatic actuator with detachable flange
SSStainless steel rack and pinion pneumatic actuator
UT 180°Double acting or spring return actuator, 180° travel
UT engineering polymerDouble acting engineering polymer actuator, in three sizes
AGScotch yoke actuator, pneumatic or hydraulic, from 1,067 to 46,000 Nm
HDHeavy-duty pneumatic scotch yoke actuator, for quarter-turn valves
SHDHD actuator in symmetric configuration
CHDHD actuator in canted configuration
Max-ElectricFamily of electric actuators, including spring return

Where is Max-Air equipment used?

  • Chemicals and petrochemicals — operation of process valves, with solvent-resistant variants
  • Food and pharmaceuticals — valves with pneumatic actuators on process lines
  • Energy, oil and gas — large valves with scotch yoke actuators, for high torques
  • Water management — pneumatically operated butterfly and ball valves
  • Plant construction — automation packages for stations and skids

How do we supply Max-Air in Romania?

We can quote Max-Air rack and pinion and scotch yoke pneumatic actuators, automation accessories and Max-Electric electric actuators. For a correct quotation, send the complete code from the actuator (for example the MT or UT 180° series), the type of action (double acting or spring return), the torque required, the air supply pressure, the mounting flange and the accessories wanted. The equipment is supplied to order, usually in 1–4 weeks, and items can ship in 24–72 h when the item is in stock, locally or at the supplier. The exact lead time is confirmed in the quotation.

For actuators with high torques or in special versions, we confirm the suitable variant and size in the quotation, based on the valve torque and the supply data you provide.

Frequently asked questions about Max-Air

What does Max-Air make?

Max-Air, headquartered in Agrate Brianza, Italy, makes rack and pinion (MT, UT, SS) and scotch yoke (AG, HD) pneumatic actuators, plus solenoid valves, limit switch boxes, positioners, manual gearboxes and, under the name Max-Electric, electric actuators.

How do I choose between a double acting and a spring return actuator?

The double acting one uses air for both directions of movement. The spring return one brings the valve back to a safe position on loss of air, for example the UT 180° with standard, centre or three-position return. Send the valve torque and the safe position required.

How soon can I receive a Max-Air actuator?

The actuators are ordered, with a usual lead time of 1–4 weeks. They can ship in 24–72 h when the item is in stock, locally or at the supplier. For high torques or special configurations the lead time may be longer and is confirmed in the quotation.

Can I replace an existing MT actuator with a new one?

It is possible, if we identify the exact model. We need the complete code from the body, for example from the MT series, the type of action, the ISO flange and the NAMUR mounting for accessories. With these data we check the fit with the valve and with the fitted positioner.

What data do I send for a quotation on an MT, SS or UT 180° actuator?

The torque required at the valve, the type of action, the control air pressure, the flange and shaft size, and the temperature and surrounding environment. Also state the accessories wanted: solenoid valve, limit switch box or positioner, so that we can quote a suitable package.

How do I request a Max-Air quotation?

Send the Max-Air code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Max-Air (manufacturer documentation)