Munsch Chemie-Pumpen supplier in Romania
Plastic centrifugal pumps for corrosive media
Headquarters: Ransbach-Baumbach, Germany
Who is Munsch Chemie-Pumpen and what does it make?
Munsch Chemie-Pumpen is a German manufacturer of plastic centrifugal pumps, based in Ransbach-Baumbach, specialised in handling aggressive and abrasive media that would corrode a metal pump. The horizontal range includes the NPC+ (universal), NPC Mammut (flows above 1,000 m³/h) and NP series, plus the CM+ and ECM+ magnetic coupling versions for fluids hazardous to the environment or health. The vertical TPC, TPC-M and TNP-KL series complete the offer. For the Romanian market we can quote from this range, based on the fluid handled and the technical parameters required by the application.
What sets Munsch apart is the material: the parts in contact with the fluid are made of plastics (PP, PVDF, PE-UHMW or PFA, depending on the series), a solution chosen where metal, even stainless steel or special alloys, would give way over time to acid, concentrated alkali or brine. The TNP-KL series, for example, covers a flow range from 2 to 700 m³/h with all wetted components in solid plastic. The CM+ magnetic coupling versions eliminate the mechanical seal for fluids where a leak would be unacceptable.
In the chemical industry and in metal surface treatment, Munsch suits fluids that quickly destroy gaskets and metal casings — pickling baths, galvanising solutions, concentrated acids — where the service life of a metal pump would be too short.
What do we supply from the Munsch Chemie-Pumpen range?
| Product | Description |
|---|---|
| NPC+ Series | Horizontal centrifugal pump with mechanical seal, for universal use in corrosive and abrasive process conditions. The components in contact with the fluid are made of plastics, suitable for a wide range of chemical fluids; we confirm the exact material based on the fluid and its concentration. |
| NPC Mammut Series | High-capacity version of the same NPC family, for flows above 1,000 m³/h in extreme process conditions, where a large volume of fluid must be handled without compromising on material. |
| CM+ / ECM+ Series | Horizontal pumps with magnetic coupling, with no mechanical seal on the shaft, for safe pumping of fluids that pose a risk to the environment or health. ECM+ is the economy version for standard applications, while CM+ covers stricter sealing requirements. |
| TNP-KL Vertical Series | Vertical centrifugal pump with volute casing, with all wetted parts in plastic (PP, PE-UHMW or PVDF), with a flow range from 2 to 700 m³/h, used for corrosive or abrasive fluids, including wastewater loaded with solids. |
Why Munsch Chemie-Pumpen?
- Parts in contact with the fluid made of plastics (PP, PVDF, PE-UHMW or PFA, depending on the series), for corrosion resistance
- CM+ and ECM+ magnetic coupling versions, with no mechanical seal, for hazardous fluids
- The NPC Mammut series covers flows above 1,000 m³/h in extreme process conditions
- The vertical TNP-KL series covers a wide flow range, from 2 to 700 m³/h
- Close-coupled versions (CS-B, NP-B, CM-B) for compact mounting without a separate bearing frame
Which Munsch Chemie-Pumpen codes and series are requested most often?
| Code | Description |
|---|---|
| NPC+ | universal pump for corrosive and abrasive conditions |
| NPC Mammut | flows above 1,000 m³/h, extreme conditions |
| NP | general-purpose horizontal plastic pump |
| CM+ | magnetic coupling, no mechanical seal |
| ECM+ | magnetic coupling, economy version |
| TPC | vertical cantilever pump for extreme conditions |
| TPC-M | vertical cantilever for fluids with solids |
| TNP-KL | vertical, flow 2–700 m³/h, solid plastic |
| CS-B | close-coupled version, compact mounting |
| NP-B | close-coupled version of the NP series |
| CM-B | close-coupled version with magnetic coupling |
| TNP-series | vertical close-coupled family |
Where is Munsch Chemie-Pumpen equipment used?
- Process chemistry — transfer of concentrated acids and alkalis
- Metal surface treatment — pickling and galvanising baths
- Metallurgy — cooling circuits and corrosive process fluids
- General industry — transfer of aggressive fluids at industrial scale
How do we supply Munsch Chemie-Pumpen in Romania?
For Munsch, availability is confirmed in the quotation; we work with what the manufacturer publishes about the NPC+, NPC Mammut, NP, CM+, ECM+, TPC and TNP-KL series. We supply through European channels, to order, typically in 1–4 weeks, depending on the material and sealing configuration required by your fluid. Each pump is configured for the exact fluid type, concentration and operating temperature. For a quotation, send us the pumped fluid, the concentration, the temperature and the required flow.
The plastic and sealing combination for an unusual fluid is established after analysing the specific case, before the quotation.
Frequently asked questions about Munsch Chemie-Pumpen
What product range does Munsch Chemie-Pumpen have?
Munsch makes horizontal and vertical centrifugal pumps with the parts in contact with the fluid made of plastics, for aggressive and abrasive chemical media that would quickly corrode a metal pump. The range includes versions with mechanical seal and versions with magnetic coupling and no dynamic seal.
How do I choose a Munsch Chemie-Pumpen pump for a concentrated acid?
The choice depends on the type of acid, the concentration and the operating temperature, which determine the compatibility of the plastic material. For fluids with a high risk to health or the environment, the CM+ magnetic coupling version eliminates the risk of leakage at the shaft seal.
Do you supply Munsch pumps in Romania?
Yes, we supply Munsch pumps to order through European supply channels, typically in 1–4 weeks depending on the material and sealing configuration. Each unit is configured for the specific fluid.
What is the Munsch equivalent of an existing plastic pump of another make?
We establish the equivalence between brands case by case. For a correct comparison we need the pumped fluid, the flow, the discharge pressure and the current material of the pump you want to replace.
What details should I specify for a Munsch pump quotation?
Send the fluid type, the concentration, the operating temperature and the required flow. These data determine the suitable series (NPC+, CM+ or TNP-KL) and the type of plastic compatible with your fluid.
How do I request a Munsch Chemie-Pumpen quotation?
Send the Munsch Chemie-Pumpen code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 20 November 2026 · Sources: MUNSCH Chemie-Pumpen GmbH (manufacturer documentation)

